JBL 프로페셔널 308P MkII 8인치 액티브 스튜디오 모니터 사용 설명서

1. 서론

The JBL Professional 308P MkII is an 8-inch, 2-way, powered, active studio monitor designed for accurate near-field music production, studio monitoring, and high-fidelity audio playback. This manual provides essential information for setting up, operating, and maintaining your monitor speaker to ensure optimal performance and longevity.

그림 1: 전면 view of the JBL Professional 308P MkII Studio Monitor.

2. 주요 특징

• 8-inch Woofer and 1-inch Tweeter: Provides superior bass performance and accurate, crystal-clear highs.
• JBL Image Control Waveguide Technology: Delivers stunning detail, precise imaging, and a wide sweet spot.
• Updated High and Low Frequency Transducers: Optimized damping for superior transient response and lower harmonic distortion.
• New Boundary EQ: Restores neutral low-frequency response when speakers are placed on a work surface or adjacent to walls.
• Patented Slip Stream Low-Frequency Port: Ensures superior bass performance at all playback levels.
• Dual Integrated, Custom Class-D Amp리퍼: Provides 112 watts of power for high output and dynamic range.
• 유연한 연결성: Balanced XLR and 1/4" TRS inputs, +4dBu / -10dBV input-sensitivity switch, and adjustable volume control.
• Rigorous 100-Hour Full-Power Test: Ensures years of dependable performance.

3. 상자 안에 무엇이 들어있나요?

• JBL 308P MkII Studio Monitor (sold individually)
• 전원 케이블

4. 설정

4.1. 배치

Optimal placement of your studio monitors is crucial for accurate sound reproduction. Position the speakers so that the tweeters are approximately at ear level when you are in your primary listening position. Ensure an equilateral triangle is formed between the two monitors and your listening position for the best stereo imaging. Avoid placing objects directly in front of the speakers that could obstruct the sound path.

Figure 2: Dimensions of the JBL Professional 308P MkII Studio Monitor (12.1"D x 10"W x 16.5"H).

4.2. 전원 연결

1. Ensure the monitor's power switch is in the OFF position.
2. Connect the supplied power cable to the AC IN port on the rear panel of the monitor.
3. 전원 케이블의 다른 쪽 끝을 적절한 AC 전원 콘센트에 꽂으십시오.

4.3. 오디오 연결

The 308P MkII offers flexible input options for various audio sources.

1. 밸런스드 XLR 입력: For professional audio interfaces, mixers, or other equipment with XLR outputs. Connect an XLR cable from your audio source to the BALANCED INPUT (XLR) on the monitor.
2. 균형 잡힌 1/4" TRS 입력: For audio interfaces, mixers, or other equipment with 1/4" TRS outputs. Connect a 1/4" TRS cable from your audio source to the BALANCED INPUT (1/4" TRS) on the monitor.

Using balanced connections (XLR or TRS) is recommended to minimize noise and interference, especially with longer cable runs.

Figure 3: Rear panel connections and controls of the JBL Professional 308P MkII.

4.4. Input Sensitivity

The rear panel features an INPUT SENSITIVITY switch (+4dBu / -10dBV). Set this switch to match the output level of your audio source. For professional equipment, +4dBu is typically used. For consumer-level equipment, -10dBV is often appropriate.

4.5. Acoustic Adjustments

The 308P MkII includes controls to fine-tune its acoustic response to your listening environment.

• 경계 EQ: Adjusts the low-frequency response to compensate for speaker placement near walls or corners. Experiment with settings to achieve a neutral bass response.
• HF 트림: Adjusts the high-frequency output to match room acoustics or personal preference.

5. 사용 설명서

1. 전원 켜기: After all connections are made, switch the POWER switch on the rear panel to the ON position. The JBL logo on the front will illuminate.
2. 볼륨 조절: Adjust the VOLUME knob on the rear panel to a suitable listening level. It is recommended to start with a low volume and gradually increase it.
3. 청취: Begin playback from your audio source. Adjust the volume as needed from both your source and the monitor's volume control.

6. 유지관리

• 청소: Use a soft, dry cloth to clean the exterior of the monitor. Avoid using abrasive cleaners or solvents.
• 통풍: Ensure adequate airflow around the monitor to prevent overheating. Do not block the rear port or any ventilation openings.
• 저장: If storing the monitor for an extended period, keep it in a dry, dust-free environment, preferably in its original packaging.

7. 문제 해결

• 소리 없음:
  • 모니터 전원이 켜져 있는지, 전원 케이블이 제대로 연결되어 있는지 확인하십시오.
  • Verify that the audio cables are correctly connected to both the monitor and the audio source.
  • Ensure the volume knob on the monitor is not set to minimum.
  • Check the input sensitivity switch (+4dBu / -10dBV) matches your audio source.
  • Confirm your audio source is playing and its output volume is adequate.
• 왜곡된 소리:
  • Reduce the volume level on both the monitor and your audio source.
  • 오디오 케이블이 손상되었는지 확인하세요.
  • Ensure the input signal is not too hot (clipping) from your audio source.
• 웅웅거림 또는 윙윙거림:
  • Ensure all audio connections are balanced (XLR or TRS).
  • Try connecting the monitor and audio source to the same power outlet.
  • 오디오 케이블과 전원 케이블을 떨어뜨려 놓으세요.

8. 사양

9. 보증 및 지원

The JBL Professional 308P MkII comes with a Limited Warranty. For specific details regarding warranty coverage, duration, and how to obtain service, please refer to the warranty card included with your product or contact JBL Professional customer support. Keep your proof of purchase for warranty claims.