Sonance MAG6R In-Ceiling Speakers User Manual

제품 끝view

The Sonance MAG6R 6-1/2" 2-Way In-Ceiling Speakers are designed to integrate seamlessly into your home audio system, providing high-quality sound from a discreet installation. Each speaker features a 6-1/2" glass fiber cone woofer with a rubber surround and a pivoting design, paired with a 1" silk-dome ferrofluid-cooled pivoting tweeter. This combination ensures a wide frequency response and clear audio reproduction. The speakers come with paintable perforated steel grilles, allowing them to blend with your interior decor.

Image: Sonance MAG6R In-Ceiling Speaker, showing the main speaker unit and the removable white perforated grille. The speaker features a black frame and a central tweeter.

안전 정보

Please read all safety instructions before installation and use. Failure to follow these instructions may result in injury or damage to the product.

• 설치나 유지관리를 하기 전에 전원이 꺼져 있는지 확인하세요.
• Installation should be performed by a qualified professional if you are unsure of the process.
• 스피커를 과도한 습기나 극한의 온도에 노출시키지 마세요.
• Use appropriate wiring and connectors as specified for audio equipment.
• 어린이의 손이 닿지 않는 곳에 보관하세요.

설정 및 설치

The Sonance MAG6R speakers are designed for in-ceiling installation. Proper planning and execution are crucial for optimal performance and safety.

1. Planning Speaker Placement

Consider the acoustics of your room and the desired sound field. For surround sound systems, refer to your audio receiver's manual for recommended speaker layouts. Ensure there are no obstructions (e.g., joists, electrical wiring, plumbing) in the ceiling where you plan to install the speakers.

2. Preparing the Mounting Hole

The mounting cutout diameter is 9-3/4 inches. The mounting depth required is approximately 4 inches.

1. Using the provided cutout template (if applicable, or measure carefully), mark the desired location on the ceiling.
2. Carefully cut the opening using a drywall saw or appropriate tool.

Image: Dimensional diagram of the Sonance MAG6R speaker, indicating its depth and diameter for installation planning.

3. 스피커 배선

적절한 굵기의 스피커 케이블을 연결하세요. amplifier or receiver to the speaker terminals. Ensure correct polarity (+ 에게 + 그리고 - 에게 -) for all speakers in your system.

• Strip approximately 1/2 inch (12 mm) of insulation from the ends of the speaker wire.
• Press down on the terminal tabs on the speaker and insert the bare wire ends into the corresponding holes. Release the tabs to secure the wire.

이미지: 후면 view of the Sonance MAG6R speaker, highlighting the spring-loaded wire terminals for connecting audio cables.

4. 스피커 장착

The speakers feature integrated mounting clamp안전한 설치를 위해 s를 사용합니다.

1. Carefully insert the speaker into the cutout hole.
2. Tighten the mounting screws on the front baffle of the speaker. This will rotate the mounting clamps outwards and secure the speaker to the ceiling material. Do not overtighten.

이미지: 사이드 프로file of the Sonance MAG6R speaker, illustrating the robust mounting clamps that secure the speaker within the ceiling opening.

5. 그릴 부착

The perforated steel grilles attach magnetically for a clean, flush finish.

• Align the grille with the speaker frame.
• The magnets will pull the grille into place, securing it firmly.
• The grilles can be painted to match your ceiling color before installation.

Image: Close-up of the white perforated steel grille, designed to be paintable and attach magnetically to the speaker frame.

작동 지침

Once installed, the Sonance MAG6R speakers operate as part of your audio system. There are no direct controls on the speakers themselves.

Adjusting Pivoting Tweeter and Woofer

The 1" silk-dome tweeter and 6-1/2" glass fiber woofer are pivoting, allowing you to direct the sound towards the primary listening area for optimized audio performance.

• Gently push the edge of the tweeter or woofer assembly to angle it as desired.
• 손상을 방지하려면 과도한 힘을 피하세요.

이미지: 앞면 view of the Sonance MAG6R speaker without its grille, revealing the central pivoting tweeter and the surrounding pivoting woofer, which can be angled for optimal sound direction.

유지

The Sonance MAG6R speakers require minimal maintenance.

• 청소: Use a soft, dry cloth to wipe the grilles and speaker frame. Do not use harsh chemicals or abrasive cleaners.
• 석쇠 회화: If painting the grilles, ensure they are clean and dry. Use a thin coat of paint to avoid clogging the perforations, which could affect sound quality. Allow to dry completely before reattaching.
• 점검: 스피커 연결이 제대로 되어 있는지 주기적으로 확인하십시오.

문제 해결

If you experience issues with your Sonance MAG6R speakers, consider the following common troubleshooting steps:

명세서

보증 정보

The Sonance MAG6R speakers come with a Limited Warranty. For specific terms and conditions, please refer to the warranty documentation included with your purchase or visit the official Sonance web대지.

고객 지원

For further assistance, technical support, or to inquire about replacement parts, please visit the official Sonance web사이트 또는 고객 서비스 부서에 문의하세요. 연락처 정보는 일반적으로 제조업체의 web사이트 또는 제품 포장에 포함되어 있습니다.