1. 서론
The ATEN VE8950T is a 4K HDMI Over IP Transmitter designed for extending 4K audio/video signals over a standard Gigabit Ethernet network. This device delivers visually lossless 4K AV signals with low latency, making it suitable for long-distance transmission in various professional environments. Its design focuses on ease of setup and operation, providing a scalable and flexible solution for multi-display 4K signal distribution.
The VE8950T offers an economical digital signage solution, addressing common challenges in AV over IP system implementation. Key benefits include limitless scalability, flexible deployment, simplified IP setup without the need for additional server PCs or software, and support for daisy-chaining to extend reach efficiently.
2. 주요 특징
- 4K HDMI Over IP Extender: Functions as a transmitter for extending HDMI signals over an IP network.
- 고품질 비디오 전송: Supports visually lossless video up to 4K at 60 Hz (4:2:0) and 4K at 30 Hz (4:4:4).
- Advanced Video Compression: Utilizes ATEN's advanced video lossless compression technology for stunning video quality.
- EDID Expert Technology: Automatically selects optimal EDID settings for smooth power-up, high-quality display, and best video resolution across various screens.
- Flexible AV Connections: Extends AV connections from simple point-to-point to complex multi-point to multi-point setups via LAN, without distance limitations.
3. 하드웨어 설명
3.1. 전면 패널
그림 1: Front Panel of the ATEN VE8950T Transmitter.
- HDMI 입력 : Connects to the HDMI source device.
- 오디오 입력: 아날로그 오디오 입력용 3.5mm 잭.
- 영어: 3.5mm jack for IR receiver connection.
- RS-232 : Serial port for control and configuration.
- USB: USB Type B port for connecting to a computer or other USB host device.
3.2. 후면 패널
그림 2: Rear Panel of the ATEN VE8950T Transmitter.
- LAN : 네트워크 연결용 RJ-45 이더넷 포트.
- DC5V: Power input jack for the 5V DC power adapter.
3.3. 상단 패널
그림 3: Top Panel of the ATEN VE8950T Transmitter.
- ID NUMBER Display: Three-digit LED display showing the device's ID.
- +/- 버튼: Used to adjust the device ID or navigate menu options.
- 링크 LED: Indicates network link status.
- 전원 LED : 전원 상태를 나타냅니다.
4. 설정 및 설치
Follow these steps to set up your ATEN VE8950T Transmitter:
- 전원 끄기 장치: Ensure all devices, including the HDMI source, display, and the VE8950T, are powered off before making any connections.
- HDMI 소스 연결: Use an HDMI cable to connect your HDMI source device (e.g., Blu-ray player, PC) to the HDMI 입력 port on the VE8950T Transmitter.
- 네트워크 연결 : Connect an Ethernet cable from your Gigabit network switch to the 랜 port on the VE8950T Transmitter. Ensure the network switch supports Gigabit speeds.
- 전원 연결: 제공된 5V DC 전원 어댑터를 연결하십시오. 직류5V port on the VE8950T Transmitter, then plug the adapter into a power outlet.
- 전원 켜기: Power on the VE8950T Transmitter. The 힘 LED에 불이 들어와야 합니다.
- Configure ID (Optional): If using multiple transmitters and receivers, configure the unique ID for each transmitter using the +/- buttons on the top panel. This ID must match the ID set on the corresponding receiver(s).
- Connect Receiver (Sold Separately): For a complete system, connect a compatible ATEN VE8950R Receiver (sold separately) to your display and the same network.
- Power On Source and Display: Power on your HDMI source device and the display.
For advanced configurations, including web GUI management and video wall setups, refer to the comprehensive user manual available on the ATEN web대지.
5. 운영
Once the VE8950T Transmitter and its corresponding receiver(s) are properly connected and powered on, the system will automatically begin transmitting the HDMI signal over the IP network.
- 신호 전송 : The HDMI video and audio from the source connected to the VE8950T will be extended to the display connected to the receiver.
- 상태 표시기 : 관찰하다 링크 그리고 힘 LEDs on the top panel. The POWER LED should be solid, and the LINK LED should indicate active network connection and data transmission.
- Web GUI Management: The VE8950T supports management via a web-based Graphical User Interface (GUI). Access the web GUI by entering the device's IP address into a web browser on a computer connected to the same network. The web GUI allows for advanced configuration, monitoring, and control, including video wall setup and firmware updates.
- RS-232 제어: The RS-232 port can be used for serial control from a control system. Refer to the detailed product manual for RS-232 command protocols.
- IR 통제: If an IR receiver is connected, you can extend IR remote control signals from the display location back to the source device.
6. 유지관리
To ensure optimal performance and longevity of your ATEN VE8950T Transmitter, follow these maintenance guidelines:
- 청소: 부드럽고 마른 천으로 기기를 닦으십시오. 액체 또는 에어로졸 세척제를 사용하지 마십시오.
- 통풍: 기기의 과열을 방지하기 위해 기기 주변에 적절한 환기가 이루어지도록 하십시오. 환기구를 막지 마십시오.
- 환경: Operate the device within the specified temperature and humidity ranges. Avoid exposing it to direct sunlight, excessive dust, or moisture.
- 펌웨어 업데이트: ATEN을 주기적으로 확인하십시오. website for firmware updates. Keeping the firmware up-to-date can improve performance, add new features, and resolve potential issues.
- 케이블 관리 : 케이블이 단단히 연결되고 올바르게 배선되어 우발적인 분리나 손상을 방지하십시오.
7. 문제 해결
If you encounter issues with your ATEN VE8950T Transmitter, refer to the following troubleshooting tips:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 디스플레이에 비디오 출력이 없습니다. |
|
|
| 영상 화질이 좋지 않거나 화면이 깜빡거립니다. |
|
|
| 접근할 수 없습니다 Web GUI. |
|
|
If the problem persists, please contact ATEN technical support for further assistance.
8. 사양
| 모델 번호 | VE8950T |
| 연결 기술 | HDMI, Ethernet (IP) |
| 비디오 인코딩 | H.265 |
| 최대 해상도 | 4K (3840 x 2160) @ 60Hz (4:2:0), 4K (3840 x 2160) @ 30Hz (4:4:4) |
| 오디오 출력 모드 | 스테레오, 서라운드 |
| 서라운드 사운드 | 5.1 채널 구성 |
| 총 HDMI 포트 | 1(입력) |
| 제어 방법 | Remote (IR), RS-232, Web 그래픽 사용자 인터페이스(GUI) |
| 제품 치수 | 9.5 x 6.5 x 6.3 인치 |
| 품목 무게 | 10.14파운드 |
9. 보증 및 지원
ATEN is committed to providing high-quality products and excellent customer service. For support regarding your VE8950T Transmitter, please refer to the following:
- 기술 지원: ATEN offers free technical support. For assistance, please contact ATEN's support team. They aim to respond to customer inquiries within 4 hours.
- 보증 서비스: Information regarding standard warranty coverage and extended warranty service packages can be found on the official ATEN web사이트 또는 고객 서비스에 문의하십시오.
- RMA 서비스: ATEN provides localized repair centers for Return Merchandise Authorization (RMA) services.
- 온라인 리소스: Visit the official ATEN website for product documentation, FAQs, driver downloads, and firmware updates.
가장 최신의 자세한 보증 정보는 다음 웹사이트를 방문하세요. ATEN 공식 스토어 또는 그들의 회사 web대지.
