1. 서론
This manual provides comprehensive instructions for the Blackstar HT Club 40 Mark II 40-Watt 1x12 Tube Combo Amp. It covers essential information for setup, operation, maintenance, and troubleshooting, ensuring optimal performance and longevity of your amplifier. The HT Club 40 Mark II features revoiced clean and overdrive channels, Blackstar's Infinite Shape Feature (ISF), two reverb textures, and a speaker-emulated output.
Please read this manual thoroughly before operating your amplifier to ensure safe and correct usage.
2. 중요 안전 지침
- 지침을 읽어보세요: 향후 참고를 위해 이 설명서를 보관하세요.
- 경고를 주의하세요: Follow all warnings on the amp증폭기 및 본 설명서에 포함되어 있습니다.
- 물 및 수분: 이 기기를 물 근처에서 사용하거나 물방울이나 물이 튀는 곳에 노출시키지 마십시오.
- 열: 라디에이터, 난방 조절기, 스토브 또는 기타 장치(다음을 포함)와 같은 열원 근처에 설치하지 마십시오. amp열을 생성하는 발전기.
- 전원 코드: 전원 코드가 밟히거나 끼지 않도록 보호하세요.
- 서비스: 모든 서비스는 자격을 갖춘 서비스 담당자에게 의뢰하십시오. 전원 코드나 플러그가 손상되었거나, 액체가 쏟아졌거나, 물체가 기기에 떨어졌거나, 기기가 비나 습기에 노출되었거나, 정상적으로 작동하지 않거나, 떨어졌을 때와 같이 기기가 어떤 식으로든 손상된 경우 서비스가 필요합니다.
- 통풍: Do not block any ventilation openings. Ensure proper airflow around the amp리퍼.
- 접지: 이것 amplifier must be grounded. Do not defeat the safety purpose of the polarized or grounding-type plug.
- 튜브: 튜브 amplifiers operate at high voltages and generate significant heat. Do not attempt to replace tubes or service the internal components unless you are a qualified technician.
3. 제품 오버view
3.1 전면 패널 컨트롤
The front panel provides access to all primary controls for shaping your amplifier's tone.
이미지: 앞면 view of the Blackstar HT Club 40 Mark II amp증폭기. 이 이미지는 다음을 보여줍니다. amplifier's front face, including the Blackstar logo, speaker grille, and the entire control panel at the top. The control panel features input jacks, various knobs for Clean and Overdrive channels, EQ settings, Reverb, Master Volume, and Power/Standby switches.
- 입력: 기타 연결용 1/4인치 잭입니다.
- 클린 채널:
- 용량: 클린 채널의 전체 출력 레벨을 제어합니다.
- 저음, 고음 : Tone controls for the clean channel.
- 음성 스위치: Alters the clean channel's voicing for different tonal characteristics.
- 오버드라이브 채널:
- 얻다: 오버드라이브/디스토션의 양을 조절합니다.
- 용량: Controls the overall output level of the overdrive channel.
- 베이스, 미들, 트레블: Tone controls for the overdrive channel.
- ISF(무한 형상 특징): '영국식'과 '미국식' 사이를 넘나드는 움직임 amp증폭기 톤.
- 음성 스위치: Alters the overdrive channel's voicing.
- 리버브: Controls the level of the built-in digital reverb effect.
- 마스터 볼륨: 전체 출력 볼륨을 제어합니다. amp리퍼.
- 대기 스위치: 장소 amplifier in standby mode, allowing tubes to warm up or cool down without signal passing through.
- 전원 스위치: 회전합니다 ampliifier를 켜거나 끕니다.
3.2 후면 패널 연결
The rear panel provides various input and output connections for external devices and speaker configurations.
이미지: 후면 view of the Blackstar HT Club 40 Mark II amplifier. This image shows the back of the amplifier, detailing the mains input, fuse holder, speaker outputs, emulated output, effects loop (send/return), footswitch input, and USB audio port.
- 전원 입력 : For connecting the supplied power cable.
- HT Fuse: Main power fuse. Ensure correct rating is used for replacement.
- 스피커 출력: Connections for external speaker cabinets. Ensure correct impedance matching (1x16 Ohm, 1x8 Ohm, 2x16 Ohm).
- Emulated Output: Provides a speaker-emulated signal for direct recording or connection to a PA system.
- Effects Loop (Send/Return): For connecting external effects pedals or processors.
- 풋스위치: Input for the supplied 2-way footswitch to switch channels and reverb.
- USB 오디오 컴퓨터에 직접 녹음하기 위한 용도입니다.
4. 설정
4.1 포장 풀기 및 배치
조심스럽게 amp앰프를 포장에서 꺼내세요. amp앰프는 안정적이고 평평한 표면에 놓고, 제품 주변에 충분한 환기가 이루어지도록 하십시오. 열원 근처나 직사광선이 비치는 곳에 두지 마십시오.
4.2 전원 연결
- 확인하십시오 amplifier's power switch is in the 'OFF' position and the standby switch is in 'STANDBY'.
- Connect the supplied mains power cable to the 'Mains Input' on the rear panel and then to a suitable grounded power outlet.
4.3 Connecting Your Instrument and Speakers
- Connect your guitar to the 'Input' jack on the front panel using a high-quality instrument cable.
- If using an external speaker cabinet, connect it to the appropriate 'Speaker Outputs' on the rear panel, ensuring correct impedance matching. The internal speaker is 16 Ohm.
- For silent practice or recording, connect to the 'Emulated Output' or 'USB Audio' as needed.
5. 사용 설명서
5.1 전원 켜기 및 끄기
- 전원 켜기: With the standby switch in 'STANDBY', turn the 'Power' switch to 'ON'. Allow approximately 2-3 minutes for the tubes to warm up.
- After the warm-up period, switch the 'Standby' switch to 'ON' to activate the amp리퍼.
- 전원 끄기 : Switch the 'Standby' switch to 'STANDBY'.
- Turn the 'Power' switch to 'OFF'.
5.2 Channel Operation
- 클린 채널: Use the 'Volume', 'Bass', and 'Treble' controls to dial in your desired clean tone. The 'Voice' switch provides additional tonal options.
- 오버드라이브 채널: Engage the overdrive channel using the footswitch or the front panel switch. Adjust 'Gain' for distortion level, 'Volume' for channel output, and 'Bass', 'Middle', 'Treble' for EQ. The 'ISF' control allows continuous blending between British and American amplifier characteristics. The 'Voice' switch offers further tonal variations.
5.3 Reverb and Master Volume
- 리버브: Adjust the 'Reverb' knob to control the amount of digital reverb applied to your sound.
- 마스터 볼륨: This control sets the overall output level of the amplifier, affecting both channels.
5.4 Emulated Output and USB Audio
- Emulated Output: Connect to a mixing console or recording interface for a speaker-emulated signal. This is useful for direct recording or live sound reinforcement without miking the speaker.
- USB 오디오 Connect to your computer via a USB cable for direct digital recording. Refer to Blackstar's web드라이버 설치 및 소프트웨어 호환성을 위한 사이트입니다.
5.5 전력 감소
The HT Club 40 Mark II features a power reduction option, allowing you to switch between 40 Watts and 4 Watts output. This is ideal for achieving saturated tube tones at lower volumes for home practice or smaller venues. Consult the amplifier's specific controls for engaging this feature, typically found on the rear panel or via a dedicated switch.
6. 유지관리
6.1 청소
청소하다 amplifier's exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the amplifier is unplugged before cleaning.
6.2 튜브 교체
Vacuum tubes have a finite lifespan and will eventually need replacement. Symptoms of worn tubes include reduced output, loss of tone, or excessive noise. Due to high internal voltages and the need for proper biasing, tube replacement and biasing should only be performed by a qualified service technician. Incorrect biasing can lead to premature tube failure and damage to the amp리퍼.
6.3 일반 관리
- 노출을 피하십시오 amp극한의 온도나 습도에 적응합니다.
- 수송하다 amplifier carefully to prevent physical damage.
- Always use appropriate speaker cables for connections; never use instrument cables for speakers.
7. 문제 해결
If you experience issues with your Blackstar HT Club 40 Mark II, consult the following table. For problems not listed or if issues persist, contact qualified service personnel.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 소리가 나지 않습니다 | Power not on, standby engaged, faulty cable, speaker disconnected, faulty tube. | Ensure power is on and standby is disengaged. Check all cables. Verify speaker connection. Consult technician for tube issues. |
| 소리가 약하거나 왜곡됨 | Worn tubes, incorrect settings, faulty instrument/cable. | Check gain and volume settings. Test with a different instrument/cable. Consult technician for tube inspection/replacement. |
| 과도한 윙윙거림 또는 소음 | Ground loop, faulty power supply, proximity to interference, worn tubes. | Ensure proper grounding. Try a different power outlet. Move away from other electronic devices. Consult technician for tube or internal component issues. |
| Scratchy knobs/pots | Dust or wear in potentiometers. | This can sometimes be resolved with specialized contact cleaner, but often indicates wear. If persistent, professional servicing may be required. |
| Overdrive gain jumpy/unresponsive | Faulty potentiometer or circuit issue. | This indicates a component fault. Professional servicing is required. |
8. 사양
Detailed technical specifications for the Blackstar HT Club 40 Mark II amp리퍼.
Image: Dimensions of the Blackstar HT Club 40 Mark II amplifier. The image shows the amplifier from an angled perspective with arrows and numerical labels indicating its width (29.13"), height (24.8"), and depth (14.96").
| 특징 | 사양 |
|---|---|
| 모델 번호 | 056309 |
| 출력 와트tage | 40와트 (4와트로 전환 가능) |
| 스피커 | 1x12인치 |
| 채널 | 2 (클린, 오버드라이브) |
| 통제 수단 | Volume, Bass, Treble (Clean); Gain, Volume, Bass, Middle, Treble, ISF (Overdrive); Reverb Level, Master Volume |
| 효과 | Digital Reverb, Effects Loop |
| 연결성 | Guitar Input, Speaker Outputs (1x16 Ohm, 1x8 Ohm, 2x16 Ohm), Emulated Output, Footswitch, USB Audio |
| 제품 크기(L x W x H) | 14.96 x 29.13 x 24.8 인치 |
| 품목 무게 | 62.5파운드 |
| 호환 장치 | 기타 |
| 재료 | Lead (Note: This refers to internal components, not external casing) |
| 제조업체 | 블랙스타 |
| 첫 번째 이용 가능 날짜 | 1년 2017월 XNUMX일 |
9. 보증 및 지원
Blackstar products are manufactured to the highest standards. For information regarding warranty coverage, terms, and conditions, please refer to the warranty card included with your product or visit the official Blackstar Amp화 web대지.
For technical support, service inquiries, or to locate an authorized service center, please visit the Blackstar Amplification official website or contact their customer support directly. Always provide your product model number (056309) and serial number when seeking support.
블랙스타 Amp공식 정보 Web대지: www.블랙스타amp에스닷컴
