소개
Thank you for choosing the Connect It CI-786 Flat Screen Wall Mount. This manual provides essential information for the safe and correct installation, operation, and maintenance of your new wall mount. Please read these instructions thoroughly before installation and retain them for future reference.
중요한 안전 정보
- 중량 용량: Do not exceed the maximum weight capacity of 50 kg (110 lbs). Overloading can result in serious injury or damage to equipment.
- 화면 크기: This mount is designed for flat screens between 94 cm (37 inches) and 178 cm (70 inches).
- 벽 유형: Ensure the mounting surface can safely support the combined weight of the mount and your display. Consult a professional if unsure.
- 설치: Follow all installation steps carefully. Improper installation can lead to equipment failure and personal injury.
- 어린이들: 설치 중에는 어린이의 접근을 차단하세요. 작은 부품은 질식 위험이 있습니다.
설정 및 설치
Before you begin, ensure you have all necessary tools and components. It is recommended that two people perform the installation.
1. Verify Package Contents
Check that all parts listed in the product packaging are present and undamaged. If any parts are missing or damaged, contact customer support.
2. Prepare the Wall Mount
Familiarize yourself with the components of the wall mount. The image below shows the assembled mount structure.
이미지 1: Connect It CI-786 Wall Mount. This image displays the main components of the wall mount, including the wall plate, articulating arms, and TV mounting brackets, ready for installation.
3. Determine Mounting Location and VESA Compatibility
Select a suitable location on your wall. Ensure the wall is capable of supporting the weight. Check your TV's VESA pattern (the four holes on the back of your TV). This mount supports VESA patterns from 200x200 mm to 600x400 mm.
이미지 2: Dimensional Diagram of Connect It CI-786 Wall Mount. This diagram illustrates the key dimensions of the mount, including VESA compatibility (min 200x200mm, max 600x400mm), wall distance (min 62mm, max 475mm), and rotational/tilt angles.
4. Mount the Wall Plate
- Mark the desired drilling points on the wall using the wall plate as a template.
- Drill pilot holes. Use appropriate drill bits for your wall type (wood stud, concrete, brick).
- Secure the wall plate to the wall using the provided screws and anchors. Ensure it is level and firmly attached.
5. Attach TV Brackets to Display
- TV를 부드럽고 깨끗한 표면에 화면이 아래로 향하도록 조심스럽게 놓으십시오.
- Attach the vertical TV brackets to the back of your display using the appropriate screws that match your TV's VESA pattern. Do not overtighten.
6. Hang Display on Wall Mount
- With assistance, carefully lift the display and hook the TV brackets onto the wall plate.
- Secure the TV to the mount using the locking mechanisms or screws as per the detailed instructions in the full manual.
작동 지침
The Connect It CI-786 wall mount offers various adjustment options for optimal view주고받음.
- 회전: The mount allows for a 360-degree rotation. Gently adjust the screen to your desired angle.
- 경사: The screen can be tilted up to 3 degrees. Loosen the tilt adjustment screws, set the desired angle, and retighten.
- 받침: The articulating arms allow the TV to swivel horizontally. Gently pull or push the screen to achieve the desired view잉 각도.
- 벽 거리: The mount can extend from a minimum of 6.2 cm (2.4 inches) to a maximum of 47.5 cm (18.7 inches) from the wall.
유지
- 청소: 부드럽고 마른 천으로 마운트를 닦으세요. 연마성 세제나 용제를 사용하지 마세요.
- 정기 점검: 모든 나사와 연결부를 주기적으로 점검하여 단단히 고정되어 있는지 확인하세요.
- 손상: If any part of the mount appears damaged, discontinue use and contact customer support.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| TV 수평이 맞지 않습니다. | 설치 중 벽판이 수평이 아닙니다. | Adjust the leveling screws on the TV brackets if available, or re-install the wall plate ensuring it is level. |
| 마운트가 느슨한 느낌 | Screws are not fully tightened or wall anchors are insufficient. | Check and tighten all mounting screws. Ensure appropriate anchors were used for your wall type. |
| Difficulty adjusting movement | Adjustment screws are too tight. | Loosen the relevant adjustment screws slightly to allow for movement, then retighten to secure position. |
명세서
- 모델: Cl-786
- 재료: 합금강
- 색상: 검은색
- 호환 장치: TV
- 장착 유형: 벽걸이형
- 이동 유형: Rotational, Swivel, Tilt
- 최대 무게 수용량: 50kg(110파운드)
- Min Screen Size Compatibility: 94cm(37인치)
- Max Screen Size Compatibility: 178cm(70인치)
- VESA 호환성: 200x200mm ~ 600x400mm
- 회전 각도: 360도
- 최대 기울기 각도: 3도
- Distance to Wall (Min): 6.2cm(2.4인치)
- Distance to Wall (Max): 47.5cm(18.7인치)
- 제품 크기: 23 x 26.2 x 23 cm (folded); 6.23 kg
보증 및 지원
For warranty information or technical support, please refer to the documentation included with your purchase or visit the official Connect It web이 사이트는 제품을 직접 수리하려고 시도하지 않는 곳입니다.
