1. 서론
Thank you for choosing the DS18 PRO-GM6 6.5-inch Midrange Loudspeaker. This manual provides essential information for the proper installation, operation, and maintenance of your speaker. Please read this manual thoroughly before installation and use to ensure optimal performance and safety.
2. 안전 정보
Always observe the following safety precautions when installing and operating your loudspeaker:
- 단락을 방지하기 위해 전기 작업을 시작하기 전에 차량 배터리의 음극 단자를 분리하십시오.
- Ensure proper wiring and connections. Incorrect wiring can damage the speaker, amp증폭기 또는 차량의 전기 시스템.
- 전원 및 스피커 연결에는 적절한 굵기의 전선을 사용하십시오.
- 차량 운행 중 스피커가 움직이지 않도록 단단히 고정하십시오.
- 차량의 안전 기능(예: 에어백)을 방해하는 위치에 스피커를 설치하지 마십시오.
- 장시간 과도하게 높은 볼륨으로 오디오 시스템을 작동시키지 마십시오. 청력 손상을 유발할 수 있습니다.
- 설치 과정의 어떤 부분이든 확실하지 않은 경우 전문 설치자에게 문의하세요.
3. 상자 안에 무엇이 들어있나요?
- DS18 PRO-GM6 Loudspeaker (1 unit)
- 사용 설명서
Note: Additional mounting hardware or speaker wire may be required and is not included.
4. 사양
이미지: 앞면 view of the DS18 PRO-GM6 loudspeaker with its main technical specifications highlighted.
| 특징 | 값 |
|---|---|
| 모델명 | PRO-GM6 |
| 스피커 유형 | Mid Range Speaker |
| 스피커 크기 | 6.5 인치 |
| RMS 전원 | 140와트 |
| 최대 힘 | 480와트 |
| 임피던스 | 8옴 |
| 주파수 응답 | 98Hz - 10kHz |
| 감광도 | 92데시벨 |
| 보이스 코일 크기 | 1.5 Inches (Kapton) |
| 자석 소재 | 페라이트(23온스) |
| 바구니 재료 | Black Stamp 강철 |
| 콘 소재 | Black Paper Woofer Cone |
| 서라운드 소재 | 천으로 된 테두리 |
| 장착 깊이 | 2.72인치(69mm) |
| 컷아웃 치수 | 5.70인치(145mm) |
| 제품 크기(DxWxH) | 6.61인치 깊이 x 6.61인치 너비 x 2.72인치 높이 |
| 품목 무게 | 3.8 파운드 |
| 호환 장치 | Car, Truck, UTV, Bus, Tractor, ATV |
5. 설정 및 설치
Proper installation is crucial for the performance and longevity of your DS18 PRO-GM6 loudspeaker. This section provides general guidelines. Specific vehicle requirements may vary.
5.1 설치 계획
- 위치: Identify suitable mounting locations in your vehicle, typically door panels or custom enclosures. Ensure sufficient mounting depth (2.72 inches / 69mm) and clearance.
- 배선: Plan the routing of speaker wires from your amplifier to the speaker locations. Avoid running speaker wires alongside power cables to prevent noise interference.
- Amplifier 매칭: The PRO-GM6 has an 8 Ohm impedance and handles 140W RMS. Ensure your amplifier can safely deliver power within these specifications. Connecting an 8 Ohm speaker to a 4 Ohm amplifier output will result in lower power delivery than the amplifier's rated 4 Ohm output.
5.2 스피커 장착
이미지: 사이드 프로file of the DS18 PRO-GM6 loudspeaker, illustrating its depth and mounting flange.
- 장착 표면 준비: If installing in a new location, carefully cut a circular opening with a diameter of 5.70 inches (145mm). Ensure the surface is sturdy and free of obstructions.
- 발언자 위치: Place the speaker into the opening, aligning the mounting holes with the pre-drilled holes or marking new ones.
- 보안 스피커: Use appropriate screws (not included) to firmly secure the speaker to the mounting surface. Do not overtighten.
5.3 배선 연결
이미지: 후면 view of the DS18 PRO-GM6 loudspeaker, showing the positive and negative speaker terminals.
- 터미널 식별: The speaker has clearly marked positive (+) and negative (-) terminals.
- 전선 연결: Connect the positive (+) output from your amplifier to the positive (+) terminal on the speaker. Connect the negative (-) output from your amplifier to the negative (-) terminal on the speaker. Maintain correct polarity for all speakers in your system.
- 보안 연결: Ensure all connections are tight and free from short circuits.
Video: A short 7-second clip demonstrating the DS18 PRO-GM6 loudspeaker rotating, showcasing its design and build from multiple angles. This can be useful for visual confirmation of the product before installation.
6. 사용 설명서
The DS18 PRO-GM6 is a midrange loudspeaker designed to reproduce frequencies between 98 Hz and 10 KHz. It should be used as part of a complete car audio system, typically paired with subwoofers for low frequencies and tweeters for high frequencies.
- 시스템 통합: Connect the PRO-GM6 to an appropriate amp리파이어 채널.
- 크로스오버 설정: For optimal sound quality and speaker protection, use an electronic crossover to filter out frequencies below 98 Hz (high-pass filter) and above 10 KHz (low-pass filter). Refer to your amplifier or head unit's manual for crossover adjustments.
- 이득 조정: 설정하다 amp출력 볼륨에 맞게 lifier 이득을 올바르게 조정합니다.tage of your head unit. Avoid setting the gain too high, as this can lead to distortion and speaker damage.
- 침입 기간: Allow a break-in period of approximately 10-20 hours of normal listening before operating the speakers at high volumes. This allows the speaker's suspension components to loosen and perform optimally.
7. 유지관리
The DS18 PRO-GM6 loudspeaker requires minimal maintenance:
- 청소: Use a soft, dry cloth to wipe the speaker cone and frame. Avoid using harsh chemicals or excessive moisture.
- 점검: 주기적으로 스피커 연결부의 조임 상태를 점검하고 전선이 닳거나 노출되지 않았는지 확인하세요.
- 환경 보호: While the speaker features a steel basket, it is not waterproof. Protect it from direct exposure to water and extreme temperatures.
8. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 스피커에서 소리가 나지 않습니다 |
|
|
| 왜곡된 소리 |
|
|
| 약하거나 먹먹한 소리 |
|
|
9. 보증 및 지원
DS18 products are covered by a limited warranty. For specific warranty terms, conditions, and duration, please refer to the warranty card included with your product or visit the official DS18 website. For technical support, troubleshooting assistance beyond this manual, or service inquiries, please contact DS18 customer support directly.
자세한 정보와 연락처는 다음에서 확인할 수 있습니다. DS18 Official Store on Amazon.
