Wintonburg 9-Light Aged Bronze Chandelier

소개

구매해주셔서 감사합니다asing the allen + roth Wintonburg 9-Light Aged Bronze Chandelier. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before beginning installation and retain them for future reference.

Image: The Wintonburg 9-Light Chandelier elegantly installed in a dining room setting, showcasing its aged bronze finish and nine faux candlestick lights.

안전 정보

경고: To avoid electric shock, always disconnect power at the main circuit breaker or fuse box before beginning installation or performing any maintenance. Ensure the fixture is properly grounded.

• 모든 전기 연결은 해당 지역 법규, 조례 또는 국가 전기 규정(NEC)을 준수해야 합니다. 적절한 전기 배선 연결에 익숙하지 않은 경우 자격을 갖춘 전기 기술자에게 문의하십시오.
• 지정된 전구 유형 및 와트만 사용하십시오.tage 과열 및 잠재적인 화재 위험을 방지합니다.
• 이 조명기구를 습하거나 건조한 곳에 설치하지 마십시오.amp locations. This fixture is rated for dry locations only.
• This product is ETL listed, indicating it has met minimum requirements of widely accepted product safety standards.
• 캘리포니아 제안 65 경고: 이 제품은 캘리포니아 주에서 암, 선천적 기형 또는 기타 생식 장애를 일으키는 것으로 알려진 화학 물질을 포함할 수 있습니다.

패키지 내용

Verify that all components are present before discarding packaging materials. If any parts are missing or damaged, do not attempt to assemble or install the fixture.

• Chandelier Fixture (A)
• Mounting Hardware Kit (B) - Includes mounting strap, screws, wire nuts, and ground screw.
• Adjustable Chain (C)

메모: Nine 60-watt max candelabra (E-12) base bulbs are required and sold separately.

이미지: 선명한 정면 사진 view of the Wintonburg 9-Light Chandelier, highlighting its aged bronze finish and the arrangement of its nine candlestick light bases.

설정 및 설치

1. 전원 끄기: Before starting installation, ensure the power to the junction box is turned OFF at the circuit breaker or fuse box.
2. 마운팅 준비: Attach the mounting strap (part of Kit B) to the outlet box using the provided screws. Ensure the strap is securely fastened.
3. 체인 길이 조정: Determine the desired hanging height for your chandelier. Use pliers to open and remove chain links as needed to achieve the correct length. The fixture is designed for adjustable height.
4. 배선 연결:
   • Connect the bare copper or green ground wire from the fixture to the ground wire from the outlet box using a wire nut.
   • Connect the white wire from the fixture to the white (neutral) wire from the outlet box using a wire nut.
   • Connect the black wire from the fixture to the black (hot) wire from the outlet box using a wire nut.
   • 모든 전선을 콘센트 상자에 조심스럽게 집어넣습니다.
5. 마운트 고정 장치: Secure the canopy (part of the fixture) to the mounting strap, ensuring all wires are safely enclosed. The fixture is designed to be installed as an up-light only.
6. 전구 설치: Screw nine 60-watt maximum candelabra (E-12) base bulbs into the sockets. B10 shape bulbs are recommended. Do not exceed the maximum wattage.
7. 복원력 : 설치가 완료되고 모든 연결이 안전한 경우 회로 차단기에서 전원을 복구하세요.

이미지: 클로즈업 view of the aged bronze ceiling canopy and mounting hardware, illustrating the component that attaches the chandelier to the ceiling junction box.

작동 지침

The Wintonburg Chandelier is operated by a standard wall switch connected to the fixture's electrical circuit.

• 켜기/끄기: Use the wall switch to control the power to the chandelier.
• 밝기 조절 가능 기능: This fixture is dimmable. To utilize the dimming function, ensure you have a compatible dimmer switch installed and are using dimmable candelabra (E-12) base bulbs.

유지

정기적인 유지관리는 샹들리에의 외관과 기능을 보존하는 데 도움이 됩니다.

• 청소: To clean the fixture, turn off the power and wipe with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
• 전구 교체: Before replacing bulbs, turn off the power to the fixture and allow bulbs to cool completely. Carefully unscrew the old bulb and replace it with a new 60-watt max candelabra (E-12) base bulb.

Image: A detailed close-up of the chandelier's faux candlestick lights, showing the E-12 base sockets where bulbs are installed.

문제 해결

샹들리에에 문제가 발생하면 다음의 일반적인 문제와 해결 방법을 참조하세요.

명세서

보증 및 지원

For warranty information, please refer to the documentation provided at the time of purchase or contact the retailer where the product was acquired. Specific warranty terms and conditions may vary.

For technical support or assistance with parts, please contact the manufacturer, allen + roth, or your retailer. Have your model number (B10091) and proof of purchase ready when contacting support.