Memorex MC3533 10-in-1 알람 시계 라디오 사용 설명서

소개

This manual provides detailed instructions for the setup, operation, and maintenance of your Memorex MC3533 10-in-1 Alarm Clock Radio. Please read this manual thoroughly before using the device to ensure proper functionality and to maximize your user experience. This device combines multiple features including a digital FM radio, Bluetooth speaker, dual alarm, USB charging port, night light, snooze, sleep timer, time setting, dimmer, and AUX-in capabilities.

패키지 내용

아래 나열된 모든 품목이 패키지에 포함되어 있는지 확인하세요.

• 1 × Memorex MC3533 Alarm Clock Radio
• 1 × 전원 어댑터
• 1 × USB 케이블
• 1 × Aux-in Cable
• 1 × 사용 설명서(이 문서)

영상: The Memorex MC3533 alarm clock radio, its retail packaging, power adapter, USB cable, and AUX-in cable, laid out as they appear in the package.

제품 끝view

Familiarize yourself with the various components and features of your Memorex MC3533 alarm clock radio.

영상: 앞쪽 view of the Memorex MC3533 alarm clock radio, displaying "12:35" on its digital LED screen. The front panel includes controls for snooze/sleep/dimmer, alarm settings (AL.1, AL.2), and indicators for PM, AUX, BT, and FM modes.

영상: 위에서 아래로 view of the alarm clock, illustrating its various functions with descriptive icons: Speaker, FM Radio, AUX-in, USB Charging Port, Clock, Night Light, Snooze, Dual Alarm, and Bluetooth.

설정

1. 전원 연결

1. 제공된 전원 어댑터를 알람시계 뒷면의 DC IN 포트에 연결하십시오.
2. Plug the power adapter into a standard wall outlet (100-240V AC, 50-60Hz).
3. 기기에는 켜기/끄기 스위치가 없습니다. 전원에서 제품을 분리하려면 벽면 콘센트에서 플러그를 뽑으십시오.

2. 배터리 백업 (별도 구매)

The unit requires one CR2032 flat lithium battery (3V) for battery backup. This battery is not included and is used solely for setting memory during power outages, not for powering the device.

1. 장치 하단에서 배터리 칸을 찾으세요.
2. 구획 덮개를 엽니다.
3. CR2032 배터리 1개를 삽입할 때 극성(+/-)을 올바르게 맞춰주세요.
4. 배터리 덮개를 단단히 닫으세요.

3. 초기 시간 설정

최초 전원 켜짐 시 또는 전원 꺼짐 후tage (if battery backup is not installed or depleted), the display will flash. Follow these steps to set the time:

1. 를 누르고 계세요 시간 설정 button (refer to product overview image for button location). The hour digits will begin to flash.
2. 사용하세요 +/- buttons to adjust the hour. Pay attention to the PM indicator if setting a 12-hour format.
3. 누르다 시간 설정 again to confirm the hour. The minute digits will flash.
4. 사용하세요 +/- 버튼을 사용하여 분을 조정합니다.
5. 누르다 시간 설정 a third time to confirm the minutes and exit time setting mode.

작동 지침

1. Time Display Brightness (Dimmer)

The LED display has 2 adjustable brightness levels. Press the 주차 button (often combined with SNOOZE/SLEEP) repeatedly to cycle through the brightness settings (High, Low, Off).

2. 12/24 Hour Display Format

12시간제와 24시간제 시간 형식을 전환하려면 버튼을 누르세요. 12/24시간 button (often combined with another function button) during normal time display. The PM indicator will illuminate for PM hours in 12-hour format.

3. 블루투스 페어링

The device is compatible with Bluetooth V4.1, allowing wireless audio streaming from compatible devices up to 30 feet away.

1. 를 누르세요 방법 button to select Bluetooth mode. The Bluetooth indicator (BT) on the display will flash, indicating it is in pairing mode.
2. 모바일 기기(스마트폰, 태블릿, 컴퓨터)에서 Bluetooth를 활성화하고 사용 가능한 기기를 검색하세요.
3. Select "Memorex MC3533" (or similar name) from the list of found devices.
4. Once paired, the Bluetooth indicator will stop flashing and remain solid. You can now play audio wirelessly through the alarm clock's speaker.

4. FM 라디오 작동

The built-in FM radio operates within the 87.5MHz-108MHz frequency range. For better signal reception, position the unit near a window and straighten the power cord, which acts as an antenna.

1. 를 누르세요 방법 button to select FM radio mode. The FM indicator will illuminate.
2. 자동 스캔: 를 누르고 계세요 재생/일시정지 button (or a dedicated scan button) to automatically scan and save available FM stations. The unit can preset up to 10 radio channels.
3. 수동 조정 : 사용하세요 이전/다음 원하는 주파수에 수동으로 맞추는 버튼입니다.
4. 프리셋 불러오기: 사용하세요 사전 설정 button (or similar) to cycle through saved stations.

5. 알람 설정 (듀얼 알람)

The device features two independent alarms (AL.1 and AL.2).

1. 를 누르고 계세요 알.1 버튼을 누릅니다. 알람 시간 숫자가 깜빡입니다.
2. 사용하세요 +/- 원하는 알람 시간을 설정하는 버튼입니다.
3. 누르다 알.1 again to confirm the hour. The minute digits will flash.
4. 사용하세요 +/- 원하는 알람 시간을 분 단위로 설정하는 버튼입니다.
5. 누르다 알.1 a third time to confirm the minutes. The display will then show options for alarm source (Buzzer or FM Radio) and volume.
6. 사용하세요 +/- buttons to select the alarm source and volume.
7. 누르다 알.1 one last time to save the settings and activate Alarm 1. The AL.1 indicator will light up.
8. 다음 과정을 반복하십시오. 알.2 to set the second alarm.
9. To disable an alarm, press the corresponding 알.1 or 알.2 button until its indicator light turns off.

영상: A visual comparison illustrating the benefit of the Memorex MC3533's gentle wake-up sound or radio alarm, contrasted with the jarring experience of a traditional harsh bell alarm clock.

6. 스누즈 기능

알람이 울리면 누르세요 선잠 button (often combined with SNOOZE/SLEEP/DIM) to temporarily silence the alarm for a few minutes. The alarm will sound again after the snooze period ends.

7. 취침 타이머

수면 타이머를 사용하면 음악이나 라디오를 들으며 잠들 수 있으며, 설정한 시간이 지나면 자동으로 꺼집니다.

1. While playing audio (Bluetooth, FM, or AUX), press the 잠 button (often combined with SNOOZE/SLEEP/DIM) repeatedly to cycle through sleep timer options (e.g., 90, 60, 30, 15 minutes, OFF).
2. The selected duration will be displayed briefly. The unit will automatically turn off after the set time.

8. 야간 조명 작동

The device features a 7-color changing LED night light.

1. 를 누르세요 빛 버튼을 누르면 야간 조명이 켜집니다.
2. 를 누르세요 빛 button repeatedly to cycle through different colors or a color-changing mode.
3. 를 누르고 계세요 빛 야간 조명을 끄는 버튼입니다.

영상: 옆 view of the Memorex MC3533 alarm clock radio, showcasing its integrated 7-color changing LED night light feature, emitting a vibrant blue and green glow.

9. USB 충전 포트

The integrated USB charging port allows you to charge your mobile devices (smartphones, tablets) while the alarm clock is powered.

1. Connect your mobile device's USB charging cable to the USB port on the back of the alarm clock.
2. 케이블의 다른 쪽 끝을 모바일 장치에 연결합니다.
3. The device will begin charging. Output: 5V DC, 1500mA.

영상: The Memorex MC3533 alarm clock radio positioned on a wooden surface, actively charging a white smartphone via its USB port. The phone's screen displays a 50% charge indicator.

10. AUX 입력 모드

Connect external audio devices using the provided 3.5mm AUX-in cable.

1. Connect one end of the AUX-in cable to the AUX-in port on the back of the alarm clock.
2. 다른 쪽 끝을 외부 장치의 헤드폰 잭이나 오디오 출력에 연결합니다.
3. 를 누르세요 방법 button to select AUX-in mode. The AUX indicator will illuminate.
4. 외부 기기에서 재생과 볼륨을 제어하세요.

유지

• 청소: 제품 표면을 닦을 때는 부드럽고 마른 천을 사용하십시오. 액체 세척제나 연마성 재료는 사용하지 마십시오.
• 저장: If storing the unit for an extended period, disconnect it from the power outlet and remove the battery backup. Store in a cool, dry place.
• 일반 관리 : Avoid exposing the unit to extreme temperatures, direct sunlight, or moisture. Do not press more than one key at the same time.

문제 해결

If you encounter any issues with your Memorex MC3533, please refer to the following common solutions:

명세서

보증 및 지원

For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official Memorex website. The manufacturer strives for 100% customer satisfaction and is available to assist with any queries or difficulties you may encounter.