소개
구매해주셔서 감사합니다asing the ThermoPro TP65C Wireless Indoor Outdoor Hygrometer Thermometer. This device is designed to provide accurate temperature and humidity readings for both indoor and outdoor environments. With its large touchscreen display and wireless remote sensor, you can easily monitor conditions up to 150 meters away. Please read this manual thoroughly before use to ensure proper operation and to maximize the product's lifespan.
패키지 내용
- 본체(수신기) 1개
- 1 x 원격 센서(송신기)
- 2 x AAA Batteries for Main Unit
- 2 x AAA Batteries for Remote Sensor
- 1 x 사용자 설명서
Image: The main display unit and the remote outdoor sensor, showing their relative sizes and design.
주요 특징
- Large LCD with Touchscreen Backlight: Easy to read in various lighting conditions.
- Wireless Monitoring: Simultaneously displays indoor/outdoor temperature and humidity.
- Expandable System: Supports up to 3 remote outdoor sensors (additional sensors sold separately).
- Max/Min Records: Displays highest and lowest temperature and humidity readings over 24 hours or all-time.
- Trend Indicators: Arrows show temperature and humidity trends (rising, falling, or no change).
- Long Range: Wireless transmission range up to 150 meters (500 feet).
- 온도 단위: 섭씨(°C)와 화씨(°F) 간 전환 가능.
- Multiple Placement Options: Magnetic back, hanging hole, and tabletop stand for versatile positioning.
Image: A diagram illustrating the key features of the ThermoPro TP65C, including temperature, humidity, wireless range, touchscreen, backlight, trend arrows, and low battery indicator.
설정
1. 배터리 설치
- 원격 센서 : Open the battery compartment on the back of the remote sensor. Insert 2 AAA batteries, observing the correct polarity (+/-). Close the compartment.
- 메인 유닛: Open the battery compartment on the back of the main unit. Insert 2 AAA batteries, observing the correct polarity (+/-). Close the compartment.
Once batteries are installed, the remote sensor will transmit data to the main unit. The main unit will display indoor temperature/humidity and outdoor temperature/humidity from the remote sensor.
2. Pairing Remote Sensors (Optional, for multiple sensors)
The main unit can connect to up to three remote sensors. If you have additional sensors, follow these steps:
- Ensure all remote sensors have batteries installed.
- On the main unit, press and hold the 채널/동기화 button for 3 seconds to enter synchronization mode.
- 를 누르세요 TX button on the back of each remote sensor you wish to pair.
- The main unit will display the readings from each paired sensor.
3. 배치 지침
- 메인 유닛: Place the main unit indoors in a dry location, away from direct sunlight, heat sources, or vents. It can be placed on a tabletop or mounted on a wall using the integrated hanging hole or magnetic back.
- 원격 센서 : Place the remote sensor outdoors in a shaded, dry location. Avoid direct exposure to rain or sunlight, which can affect accuracy. For best results, place it under an overhang or in a weather-resistant enclosure. The maximum transmission range is 150 meters (500 feet) in an open area. Walls, metal objects, and electronic devices can reduce the range.
Image: A close-up of the remote sensor, highlighting its compact size and suitable for outdoor placement.
Image: A close-up of the main unit, showing its display and suitable for indoor placement.
작동 지침
본체 디스플레이
The main unit's large LCD displays indoor and outdoor temperature and humidity, along with trend indicators and MAX/MIN records.
Image: The main display unit showing indoor and outdoor temperature and humidity readings, along with various icons and buttons.
버튼과 기능
- °F/°C 버튼: Press to switch between Fahrenheit and Celsius temperature display.
- 라이트 버튼: Press to activate the backlight for 15 seconds.
- 최대/최소/지우기 버튼:
- Press once to display MAX (highest) temperature and humidity records.
- Press again to display MIN (lowest) temperature and humidity records.
- Press and hold for 3 seconds to clear the MAX/MIN records. The records will also clear automatically every 24 hours.
- 채널/동기화 버튼:
- Press to cycle through remote sensor channels (CH1, CH2, CH3) if multiple sensors are connected.
- Press and hold for 3 seconds to re-synchronize with remote sensors.
Temperature and Humidity Trend Indicators
The arrows next to the temperature and humidity readings indicate the trend:
- ↑ (Up Arrow): 온도/습도가 상승하고 있습니다.
- → (Right Arrow): Temperature/humidity is stable.
- ↓ (Down Arrow): Temperature/humidity is falling.
Image: A close-up of the display showing the trend arrows for temperature and humidity.
유지
- 부드러운 천으로 장치를 청소하십시오. damp 천. 물에 담그지 마십시오.
- 연마성 세척제나 용제를 사용하지 마십시오.
- Remove batteries if storing the unit for an extended period.
- Ensure the remote sensor is protected from direct weather elements to prolong its lifespan.
문제 해결
No Remote Sensor Data
- Check if batteries are correctly installed in the remote sensor and main unit.
- Ensure the remote sensor is within the 150-meter transmission range.
- Relocate the main unit and/or remote sensor to reduce interference from other electronic devices or large metal objects.
- Re-synchronize the remote sensor: Press and hold the 채널/동기화 button on the main unit for 3 seconds, then press the TX button on the back of the remote sensor.
부정확한 판독
- Ensure the remote sensor is not in direct sunlight or exposed to rain.
- Place both units side-by-side for 30 minutes to compare readings. If they differ significantly, contact customer support.
- Avoid placing the units near heat sources, vents, or areas with extreme temperature fluctuations.
화면이 어둡거나 아예 보이지 않습니다.
- 본체의 배터리를 교체하십시오.
명세서
| 특징 | 사양 |
|---|---|
| 실내 온도 범위 | -20°C ~ 70°C (-4°F ~ 158°F) |
| 실외 온도 범위 | -50°C ~ 70°C (-58°F ~ 158°F) |
| 습도 범위 | 상대습도 10% ~ 99% |
| 온도 정확도 | ±1.1°C (±2.0°F) |
| 습도 정확도 | ±2% between 30% and 80%, ±3% below 30% and above 80% |
| 전송 범위 | 야외에서 최대 150미터(500피트) |
| 빈도 | 868MHz |
| 전원(주 장치) | AAA 2V 배터리 1.5개 |
| 전원(원격 센서) | AAA 2V 배터리 1.5개 |
| 제품 치수(본체) | 8.5 x 8.5 x 2.5cm(3.3 x 3.3 x 1인치) |
| 제품 크기 (원격 센서 포함) | 7.4 x 6.3 x 2.5cm(2.9 x 2.5 x 1인치) |
Image: A visual representation of the main unit and remote sensor with their dimensions indicated.
보증 및 지원
ThermoPro provides a 1-year warranty for this product from the date of purchase. If you register your product on the ThermoPro website, the warranty will be extended to 3 years. This warranty covers defects in materials and workmanship. It does not cover damage caused by misuse, accident, or unauthorized modifications.
For warranty claims, technical support, or any questions regarding your ThermoPro TP65C, please contact ThermoPro Customer Service:
- Web대지: www.thermopro.com
- 이메일: service@thermopro.com
Please have your model number (TP-65C) and purchase date ready when contacting support.