1. 소개 및 이상view
The PS Audio Stellar GainCell DAC is a fully balanced analog preamplifier and a full-featured Digital-to-Analog Converter (DAC). It integrates years of research and innovation in Class A analog amplification and state-of-the-art digital reproduction to deliver a rich and full-bodied musical experience. This unit is designed to be the core of a high-fidelity audio system, accepting various analog and digital sources and providing high-quality output to a power amp라이터와 스피커.
Key functionalities include a Class A balanced analog preamplifier, a full-function DAC, a Class A headphone output, and remote control capabilities. It supports both fixed and variable DAC modes and includes 12-volt triggers for system integration.
2. 특징
- Analog Gain Cell: This technology addresses volume control by varying its gain directly, eliminating the need for sonically degrading elements like potentiometers or relays in the signal path.
- Digital to Analog Converter (DAC): Integrated with industry-leading Sabre32 bit Hyperstream architecture, the Stellar DAC features a fully balanced Class A analog output stage, multiple power supplies, independent jitter-reduced inputs, DSD, I2S, and asynchronous USB support.
- 견고한 구조: Each Stellar product is hand-built in PS Audio's Colorado facility, utilizing durable aluminum and cold-rolled steel for longevity and performance.
- 포괄적인 제어: Includes Volume Control, Balance Control, Home Theater Mode, Polarity (phase) Control, Filter Control, Trigger Output, and a full-function Remote Control.
- 다양한 연결성: Features multiple digital inputs (I2S, Coax x2, Optical, USB Type B) and analog inputs (RCA x3, XLR x1), along with balanced XLR and unbalanced RCA analog outputs, and a 1/4" headphone jack.
3. 설정
3.1 풀기
Carefully remove the Stellar Gain Cell DAC from its packaging. Retain all packaging materials for future transport or servicing. Inspect the unit for any signs of physical damage. If damage is observed, contact your dealer immediately.
3.2 배치
Place the unit on a stable, level surface away from direct sunlight, heat sources, and excessive moisture. Ensure adequate ventilation around the unit; do not block the ventilation slots on the top or sides. Allow at least 2 inches (5 cm) of clear space above and around the unit for proper airflow.
3.3 연결
Before making any connections, ensure the Stellar Gain Cell DAC and all connected components are powered off and unplugged from the AC mains. Refer to the rear panel diagram below for connection points.
Figure 3.1: Rear Panel Connections of the Stellar Gain Cell DAC.
3.3.1 개의 디지털 입력
- I2S: Connect to compatible I2S sources for optimal digital audio transmission.
- Coaxial (x2 PCM): Use high-quality coaxial digital cables for connecting CD players, streamers, or other digital sources.
- 광학: Connect devices using optical (Toslink) digital cables.
- USB "B" Type: Connect to a computer for high-resolution audio playback. Ensure appropriate drivers are installed on your computer if required.
3.3.2 개의 아날로그 입력
- RCA (3 stereo pair): Connect analog sources such as phono preamplifiers, tuners, or tape decks using RCA cables.
- XLR (1 stereo pair): For balanced analog connections from compatible sources, providing improved noise rejection.
3.3.3 Analog Audio Outputs
- RCA (analog unbalanced) 1 stereo pair: Connect to the unbalanced inputs of your power amp리퍼.
- XLR (stereo balanced) 1 stereo pair: Connect to the balanced inputs of your power amplifier for optimal signal integrity.
- 1/4" Headphone connector (front panel): For direct headphone listening.
3.3.4 전원 연결
Connect the supplied AC power cord to the IEC inlet on the rear panel of the Stellar Gain Cell DAC and then to a suitable AC wall outlet. Ensure the voltage는 해당 지역의 요구 사항을 충족합니다.
4. 사용 설명서
4.1 전원 켜기/끄기
After all connections are made, flip the power switch on the rear panel to the 'ON' position. The front panel display will illuminate. To power off, flip the switch back to 'OFF'.
Figure 4.1: Front Panel of the Stellar Gain Cell DAC.
4.2 입력 선택
Use the input selector buttons on the front panel or the remote control to cycle through the available digital and analog inputs. The selected input will be indicated on the front display.
4.3 볼륨 조절
Adjust the output volume using the large rotary knob on the front panel or the volume up/down buttons on the remote control. The volume level is displayed numerically on the front panel.
4.4 DAC Modes (Fixed or Variable)
The Stellar Gain Cell DAC can operate in either fixed or variable DAC mode. In fixed mode, the DAC output level is constant, and volume control is handled by a downstream preamp리파이어 또는 통합 amplifier. In variable mode, the Gain Cell DAC acts as a preamplifier, controlling the volume directly. Consult the full user manual for instructions on switching between these modes.
4.5 헤드폰 출력
Plug your 1/4" headphones into the jack on the front panel. The headphone output is a Class A design, providing high-quality audio for personal listening. Connecting headphones typically mutes the main analog outputs.
4.6 리모콘 기능
The included remote control provides convenient access to all primary functions, including power, input selection, volume adjustment, balance control, polarity inversion, filter selection, and activation of Home Theater Mode. Refer to the remote control's specific diagram in the comprehensive manual for button layouts.
5. 유지관리
5.1 청소
To clean the exterior of the unit, use a soft, dry, lint-free cloth. For stubborn marks, slightly dampen the cloth with water. Avoid using abrasive cleaners, solvents, or chemical sprays, as these can damage the finish and internal components.
5.2 환기
Regularly check that the ventilation slots on the top and sides of the unit are not obstructed by dust or other objects. Proper airflow is essential for maintaining optimal operating temperature and ensuring the longevity of the components.
6. 문제 해결
If you experience issues with your Stellar Gain Cell DAC, please refer to the following common troubleshooting steps before contacting support.
| 문제 | 가능한 원인 | 해결책 | |
|---|---|---|---|
| 전원이 없습니다 | 전원 코드가 분리됨; 전원 스위치 꺼짐; 퓨즈 단선 | Ensure power cord is securely connected. Check rear panel power switch. If unit still does not power on, contact support; do not attempt to replace fuse yourself. | |
| 사운드 출력이 없습니다 | Incorrect input selected; Volume too low; Mute engaged; Output cables disconnected; Downstream component issues | Verify correct input is selected. Increase volume. Check if mute is active on unit or remote. Ensure all audio cables are securely connected. Check power and input selection on your power amp리퍼. | |
| 왜곡되거나 잡음이 섞인 소리 | Poor cable connections; Ground loop; Source quality; Digital input format mismatch | Check all cable connections for tightness and proper seating. Try disconnecting other components to isolate a ground loop. Verify the quality of the source audio. Ensure the digital input format (PCM, DSD) is compatible with the source and unit settings. | |
| 리모컨이 작동하지 않습니다 | Dead batteries; Obstruction; Remote sensor blocked | Replace batteries. Ensure no objects are blocking the line of sight between the remote and the unit's front panel sensor. | |
If the problem persists after attempting these solutions, please contact PS Audio customer support for further assistance.
7. 사양
| 일반적인 | |
|---|---|
| 제조업체 | PS 오디오 |
| 모델 번호 | STL-GDAC-US-B |
| 치수(폭 x 높이 x 깊이) | 17인치 x 3인치 x 12인치(43.18 x 7.62 x 30.48cm) |
| 무게 | 13.5파운드(7.71kg) |
| 한국어: | 810283014294 |
| 디지털 입력 | |
| 유형 | I2S, Coax (x2 PCM), Optical, USB "B" Type |
| 형식 | PCM, DSD |
| 아날로그 입력 | |
| (주)알에이씨에이 | 3 스테레오 쌍 |
| XLR | 1 스테레오 쌍 |
| 아날로그 오디오 출력 | |
| RCA (unbalanced) | 1 스테레오 쌍 |
| XLR (balanced) | 1 스테레오 쌍 |
| 헤드폰 | 1/4" connector (front panel) |
| Analog Performance | |
| 얻다 | 12dB +/-0.5dB |
| 최대 출력 | 20Vrms |
| 감광도 | 5.3Vrms |
| 입력 임피던스 | 47KΩ single ended RCA, 100KΩ Balanced XLR |
| 출력 임피던스 | 100Ω single ended RCA, 200Ω balanced XLR |
| 주파수 응답 | 20Hz – 20KHz +0/- 0.25dB, 10Hz – 100KHz +0.1/-3.0dB |
| S/N Ratio (1KHz) | >110dB(최대 출력) |
| Headphone Performance | |
| Output Power @1% THD | 300Ω: 300mW, 16Ω: 3.25W |
| S/N Ratio (1kHz Noise) | >95dB (max output), <-80dBV |
| 출력 임피던스 | <4Ω |
8. 보증 및 지원
8.1 제조업체 보증
All PS Audio products, including the Stellar Gain Cell DAC, come with a three-year warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.
8.2 고객 지원
For technical assistance, troubleshooting beyond this manual, or warranty service, please contact PS Audio customer support. Visit the official PS Audio web연락처 정보, FAQ 및 추가 리소스를 제공하는 사이트입니다.
Note: Do not attempt to service the unit yourself. Refer all servicing to qualified service personnel.
