소개
This instruction manual provides essential information for the proper setup, operation, and maintenance of your mDesign Steel Refillable Liquid Soap Dispenser Pump Bottles. Please read this manual thoroughly before use to ensure optimal performance and longevity of your product.
Image: Two mDesign Hyde Collection bronze soap dispensers, showcasing their design and finish.
패키지 내용
- 2 x mDesign Steel Refillable Liquid Soap Dispenser Bottles
- 2 x Pump Mechanisms
Image: The product packaging indicating a two-pack of the bronze soap dispensers.
설치 지침
- 풀다: Carefully remove the soap dispensers and pump mechanisms from their packaging.
- 주유 준비: Unscrew the pump mechanism from the top of the dispenser bottle by turning it counter-clockwise.
- 병을 채우세요: Pour your desired liquid soap, dish soap, hand sanitizer, or essential oil blend into the bottle. Do not overfill; leave some space at the top to accommodate the pump mechanism.
- Reattach Pump: Carefully reinsert the pump mechanism into the bottle opening and screw it clockwise until securely tightened.
- 펌프 프라이밍: Press the pump head several times until the liquid begins to dispense. This may require 5-10 presses for initial use.
Image: Illustrates the process of refilling the soap dispenser by pouring liquid into the open bottle.
작동 지침
To dispense liquid, place your hand under the nozzle and press down firmly on the pump head. The pump is designed for smooth and consistent dispensing.
Image: A user demonstrating how to operate the soap dispenser by pressing the pump.
유지
- 외부 청소: 디스펜서 외부를 부드러운 천으로 닦아주세요.amp 천과 순한 비누를 사용하십시오. 연마성 세제나 수세미는 마감재를 손상시킬 수 있으므로 사용하지 마십시오.
- 펌프 청소: If the pump becomes clogged or sticky, remove it from the bottle and rinse it thoroughly under warm water. You may need to pump warm water through the mechanism several times to clear any residue.
- 리필: Refill the dispenser as needed following the "Setup Instructions" above.
- 저장: When not in use for extended periods, empty and clean the dispenser, then store it in a dry place.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Pump not dispensing liquid. | Bottle is empty or pump is not primed. | Refill the bottle and/or prime the pump by pressing it repeatedly until liquid appears. |
| Pump is stiff or sticky. | Residue buildup in the pump mechanism. | Remove the pump and rinse thoroughly with warm water. Pump warm water through the mechanism to clear blockages. |
| Liquid leaks from around the pump. | Pump not securely tightened or damaged seal. | Ensure the pump mechanism is screwed on tightly. If leaking persists, inspect the seal for damage. |
명세서
- 상표: 엠디자인
- 모델 번호: 9429MDBA
- 재료: 금속
- 색상: 청동
- 제품 크기(각각): 2.6인치 길이 x 2.6인치 너비 x 8.25인치 높이(6.6cm 길이 x 6.6cm 너비 x 21cm 높이)
- 액체량: 8액량 온스(약 236ml)
- 품목 무게(각각): 14.4 온스(약 408그램)
- 수량: 2 카운트
- 한국어: 841247194295
Image: A visual representation of the dispenser's dimensions, indicating a base diameter of 3.5 inches (8.9 cm) and a total height of 8.25 inches (21 cm).
보증 및 지원
보증 정보 또는 제품 지원에 대해서는 제조업체의 공식 웹사이트를 참조하십시오. web사이트를 방문하거나 고객 서비스에 직접 문의하세요. 보증 청구를 위해 구매 영수증을 보관하세요.
제조업체 Web대지: mDesign Official Store
