Apera Instruments AI521 PH800 실험실용 탁상형 pH 측정기 키트 사용 설명서

1. 제품 오버view

The Apera Instruments PH800 Benchtop pH Meter is engineered for precise and reliable pH measurements in various water solutions, suitable for scientific research and quality control applications. This kit includes Apera’s PC-body 201T-F pH/Temperature Electrode, enabling quick and accurate pH readings with automatic temperature compensation.

주요 특징:

• Quick and easy 1 to 3 points automatic calibration with a calibration guide, automatically recognizing 5 types of pH standards (7.00, 4.00, 10.01, 12.45, 1.68).
• High-quality 201T-F pH/temperature combination electrode ensures stable and accurate measurements for general water solutions.
• GLP data management with 500 groups of data storage and USB data output.
• Electrode slope display between calibrations to monitor the health and performance of your pH electrode.
• Large backlit LCD displays pH and temperature simultaneously, along with icons for stable readings and completed calibrations.
• ORP (Redox) measurement mode available with an optional ORP electrode (sold separately).
• IP54 splash-proof design for enhanced durability.

2. 패키지 내용

The Apera Instruments PH800 Benchtop pH Meter Kit includes the following components:

• PH800 벤치탑 pH 측정기
• 201T-F pH/Temperature Electrode
• 유연한 전극 암 및 홀더
• USB 케이블
• PC-Link Software Flash Drive (for Windows-based systems only)
• DC9V (120V) Power Adapter
• Calibration Solutions: 3 bottles (7.00, 4.00, 10.01, 50ml each)

3. 초기 설정

Follow these steps to set up your PH800 Benchtop pH Meter for first use:

1. 구성 요소 풀기: 포장에서 모든 물품을 조심스럽게 꺼내어 손상 여부를 확인하십시오.
2. Assemble Electrode Holder: Attach the flexible electrode arm and holder to the meter base. Ensure it is securely fastened to provide stable support for the electrode.
3. Connect pH Electrode: Plug the BNC connector of the 201T-F pH/Temperature Electrode into the corresponding BNC port on the back of the meter. Connect the temperature probe into the TEMP port.
4. 전원 연결: Plug the DC9V power adapter into the meter's power input port and then into a standard electrical outlet.
5. USB 연결(선택 사항): If you plan to use the GLP data management features, connect the USB cable from the meter to your computer. Install the provided PC-Link software from the flash drive (Windows only).

그림 3.1: The Apera Instruments PH800 Benchtop pH Meter fully assembled with the electrode in a beaker, demonstrating a typical setup for measurement.

그림 3.2: 뒤쪽 view of the PH800 meter, highlighting the REF, pH/mV, TEMP, USB, and DC 9V connection ports for various probes and power.

그림 3.3: Close-up of the flexible electrode holder, designed for easy positioning and secure support of the pH electrode during operation.

4. 사용 설명서

4.1. 전원 켜기 / 끄기

를 누르세요 힘 button (usually marked with a circle and vertical line icon) to turn the meter on or off. The large backlit LCD will illuminate upon startup.

그림 4.1: 위에서 아래로 view of the PH800 meter's control panel, showing the power button, mode/setup, enter, unit, calibration, and measurement buttons.

4.2. 교정

Accurate calibration is crucial for reliable pH measurements. The PH800 supports 1 to 3 points automatic calibration.

1. 완충 용액을 준비하세요: Use fresh Apera calibration solutions (pH 7.00, 4.00, 10.01 are commonly included). Ensure the electrode and beakers are clean.
2. 보정 시작: 를 누르세요 칼 button. The meter will enter calibration mode.
3. First Point Calibration: Rinse the electrode with distilled water and immerse it in the pH 7.00 buffer solution. Stir gently and wait for the reading to stabilize. The meter will automatically recognize the buffer and confirm calibration.
4. Second and Third Point Calibration (Optional): For higher accuracy, repeat the process with pH 4.00 and pH 10.01 buffer solutions. The meter will guide you through the process.
5. Calibration Reminder: The meter features a calibration reminder function to ensure regular calibration for optimal performance.
6. 전극 상태: The self-diagnosis function provides slope data between calibration points, allowing you to monitor the condition and performance of your pH electrode.

4.3. 측정

After successful calibration, you can proceed with measurements.

1. 전극 세척: Rinse the electrode thoroughly with distilled water before and after each measurement.
2. 침지 전극: 전극을 용액에 담그십시오ample solution. Ensure the sensing part of the electrode is fully submerged.
3. 안정화를 기다립니다. Allow the reading on the large backlit LCD to stabilize. A stable reading icon (often a smiley face) will appear when the measurement is ready. The display shows both pH and temperature simultaneously.
4. 기록 읽기: Note down the pH and temperature values.

그림 4.4: The large backlit LCD screen of the PH800 meter, clearly displaying pH and temperature readings, along with stabilization and calibration success icons.

4.4. Data Management (GLP & USB Output)

The PH800 meter offers advanced data management capabilities.

• 데이터 저장: The meter can store up to 500 groups of measurement data, adhering to GLP (Good Laboratory Practice) standards.
• USB Data Output: Connect the meter to a Windows-based computer via the USB cable to transfer stored data.
• PC 소프트웨어 : Use the provided PC-Link software to view, analyze, and export data to spreadsheets for further analysis.
• Auto-Timing Data Log: Utilize the auto-timing data log mode for professional measurements requiring timed data collection.

그림 4.5: The PH800 meter connected to a laptop via USB, illustrating its GLP data management capabilities with auto/manual data logging and 500 sets of data storage.

5. 유지관리

Proper maintenance ensures the longevity and accuracy of your PH800 pH meter and electrode.

• 전극 청소 : Regularly clean the pH electrode with distilled water. For stubborn residues, use a mild cleaning solution recommended for pH electrodes.
• 전극 저장 : When not in use, store the pH electrode in its protective cap filled with a suitable electrode storage solution (e.g., 3M KCl solution). Never store the electrode dry or in distilled water.
• 계량기 청소: Wipe the meter's surface with a soft, damp cloth. Avoid using abrasive cleaners or solvents. The meter is IP54 splash-proof, but avoid direct water exposure.
• 교정 솔루션: Keep calibration solutions sealed when not in use and replace them regularly to ensure accuracy.

6. 문제 해결

This section addresses common issues you might encounter with your PH800 pH meter.

• 부정확한 판독: Ensure the electrode is properly calibrated. Check the electrode's slope data in the self-diagnosis function; a low slope indicates an aging or faulty electrode. Clean the electrode thoroughly.
• 느린 응답: This can be due to a dry or contaminated electrode. Rehydrate the electrode in storage solution or clean it.
• 디스플레이/전원 없음: Check the power adapter connection and ensure the outlet is functional.
• 교정 오류: Ensure you are using fresh, correct buffer solutions. Follow the calibration steps precisely. The self-diagnosis function can help identify specific calibration issues.
• 데이터 전송 문제: Verify the USB cable connection and ensure the PC-Link software is correctly installed on a compatible Windows system.

For persistent issues, refer to the detailed troubleshooting guide in the full user manual or contact Apera Instruments customer support.

7. 기술 사양

8. 보증 및 지원

The Apera Instruments PH800 Benchtop pH Meter is manufactured under an ISO 9001:2015 certified quality system and is CE and RoHS certified, ensuring high standards of quality and safety.

For specific warranty information, technical assistance, or service inquiries, please contact Apera Instruments directly through their official website or authorized distributors. Please have your model number (AI521) and purchase date available when contacting support.