제품 끝view
The DS18 6XL600-8 is a high-performance 6.5-inch mid-range loudspeaker designed for professional car audio systems. It delivers clear and powerful sound with a robust construction for durability and optimal acoustic performance. This speaker is engineered to provide a wide frequency response and high sensitivity, ensuring an immersive audio experience.
상자 안에 무엇이 들어있나요?
- DS18 6XL600-8 Mid-Range Loudspeaker (1 unit)
- 사용 설명서
기술 사양
| 모델 | 6XL600-8 |
| 유형 | 중급 확성기 |
| 크기 | 6.5인치 |
| RMS 전원 | 300 와트 |
| 최대 힘 | 600 와트 |
| 임피던스 | 8옴 |
| 감도 (1W / 1m) | 97데시벨 |
| 주파수 응답 | 60Hz-12.5kHz |
| 음성 코일 직경 | 2인치 |
| 자석 소재 | 페라이트 |
| 자석 무게 | 34 온스 |
| 장착 깊이 | 3.44인치(87.5mm) |
| 컷아웃 치수 | 5.9인치(150mm) |
| 프레임 소재 | 빨간색 알루미늄 바구니 |
| 콘 소재 | 비압착 종이 콘 |
설정 및 설치
Proper installation is crucial for optimal performance and longevity of your DS18 6XL600-8 loudspeaker. It is recommended to have professional installation for car audio components.
스피커 장착
Ensure the mounting location has sufficient depth (3.44 inches) and a cut-out diameter of 5.9 inches. Use appropriate mounting hardware to secure the speaker firmly, minimizing vibrations.

이미지: 앞면 view of the DS18 6XL600-8 speaker, showing the non-pressed paper cone and DS18 logo.

이미지: 뒤로 view of the DS18 6XL600-8 speaker, highlighting the push-to-connect terminals for wiring.
배선 및 연결
스피커를 호환되는 장치에 연결하십시오. amplifier. Ensure correct polarity (+ to + and - to -) to avoid phase issues. The speaker has an 8-Ohm impedance and can handle up to 300W RMS power. Match the amplifier's output impedance and power to the speaker's specifications for optimal performance and to prevent damage.
The strategically designed ventilation system helps dissipate heat, ensuring reliable performance during prolonged high-volume use.
작동 지침
Once installed and wired correctly, your DS18 6XL600-8 loudspeaker is ready for operation. Follow these guidelines for the best audio experience:
- Amp설정: 설정하세요 amplifier's gain levels appropriately. Start with low gain and gradually increase it until you achieve desired volume without distortion.
- 크로스오버 설정: 당신의 능력을 활용하세요 amplifier's or head unit's crossover functions. For mid-range speakers, a high-pass filter is typically recommended to prevent low frequencies from reaching the speaker, which can cause distortion and damage. Refer to your amplifier's manual for specific crossover frequency recommendations.
- 볼륨 조절: Avoid excessive volume levels that lead to audible distortion. Distortion can damage the speaker over time.
유지 보수 및 관리
To ensure the longevity and continued performance of your DS18 6XL600-8 loudspeaker, follow these maintenance tips:
- 청소: Use a soft, dry cloth to gently wipe the speaker cone and frame. Avoid using harsh chemicals or abrasive materials that could damage the speaker's components.
- 환경 조건: Protect the speaker from direct exposure to excessive moisture, extreme temperatures, and direct sunlight for prolonged periods. While the aluminum basket offers durability, consistent exposure to harsh elements can degrade performance.
- 점검: Periodically inspect the speaker for any signs of damage, loose connections, or wear and tear. Address any issues promptly to prevent further problems.
문제 해결
If you encounter issues with your DS18 6XL600-8 loudspeaker, refer to the following common troubleshooting steps:
- 소리 없음:
- 모든 배선 연결부를 확인하십시오. amp스피커에 앰프를 연결하여 안정적인 접촉과 올바른 극성을 확보하십시오.
- 확인해주세요 amplifier의 전원이 켜져 있고 올바르게 작동하고 있습니다.
- Ensure the audio source (head unit, media player) is active and sending a signal.
- 왜곡된 소리:
- 감소하다 amplifier's gain setting. Excessive gain can lead to clipping and distortion.
- Check the crossover settings. Incorrect crossover points can cause the speaker to play frequencies it's not designed for, leading to distortion.
- Inspect the speaker cone for any physical damage.
- 낮은 볼륨:
- 증가시키다 amplifier's gain gradually.
- Ensure the audio source's volume is turned up.
- Check for any loose or corroded wiring connections that might impede signal flow.
제품 미디어
이미지

Image: DS18 6XL600-8 speaker shown in its retail packaging.

Image: DS18 6XL600-8 speaker with a clear view of the wiring terminals.

이미지: 앞면 view of the DS18 6XL600-8 speaker, highlighting the cone and logo.

이미지: 위에서 아래로 view of the DS18 6XL600-8 speaker.

이미지: 측면 view of the DS18 6XL600-8 speaker, showing its profile.

이미지: 클로즈업 view of the DS18 6XL600-8 speaker's push terminals.

이미지: 뒤로 view of the DS18 6XL600-8 speaker, showing the magnet and frame design.
비디오
Video: DS18 Mid-Range Loudspeakers overview. 이 영상은 일반적인 내용을 제공합니다.view of DS18's mid-range loudspeaker line, including features and design.
Video: DS18 PRO XA 6.5 10th Anniversary Series Speaker. This video showcases the 10th Anniversary edition of the DS18 PRO XA 6.5 speaker, highlighting its design and features.
Video: PRO-GM6B Midrange loudspeaker Specs. This video details the specifications of the PRO-GM6B midrange loudspeaker, providing technical insights.
Video: DS18 6.5" Pro Audio Midrange Speakers with Black Bullet Tweeter. This video features the DS18 6.5" Pro Audio Midrange Speakers, showcasing their design and the integrated black bullet tweeter.
Video: PRO-X6.4BMPK Tech Talk and Specs. This video provides a technical discussion and detailed specifications for the PRO-X6.4BMPK speaker.
보증 및 지원
The DS18 6XL600-8 Mid-Range Loudspeaker comes with a Limited Warranty. For detailed warranty terms, service, or technical support, please refer to the official DS18 web사이트를 방문하거나 고객 서비스에 문의하세요.
방문할 수 있습니다 DS18 스토어 더 많은 제품과 정보를 확인하세요.





