1. 서론
This manual provides essential information for the safe installation, operation, and maintenance of your Lepro 11-inch 24W LED Flush Mount Ceiling Light. Please read these instructions thoroughly before installation and retain them for future reference.
2. 안전 정보
- 경고: 감전 위험이 있습니다. 설치 또는 정비 전에 퓨즈 박스 또는 회로 차단기의 전원을 분리하세요.
- 본 제품은 해당 설치 규정에 따라 제품의 구조, 작동 및 관련 위험을 잘 아는 사람이 설치해야 합니다.
- 모든 전기 연결이 안전한지 확인하고 현지 규정과 조례를 준수하세요.
- 제품을 개조하지 마십시오. 개조 시 보증이 무효화되고 안전상의 위험이 발생할 수 있습니다.
- This fixture is rated IP54 for water and dust resistance, making it suitable for damp locations like bathrooms. However, it is not submersible.
- This light fixture is 밝기 조절 불가. Do not connect to a dimmer switch.
3. 상자 안에 무엇이 들어있나요?
설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.
- Lepro 11-inch LED Flush Mount Ceiling Light
- 장착 하드웨어(나사, 벽 앵커)

Image: The Lepro 11-inch LED Flush Mount Ceiling Light with its included mounting bracket and screws.
4. 제품 오버view 및 사양
주요 특징:
- IP54 Water Resistant and Dust Proof: Sealed design protects against splashing water and dust, suitable for bathrooms and damp 위치.
- Slim Design and Long Lifespan: Blends seamlessly with any interior style, ideal for low or sloped ceilings. Integrated LED lights are rated for over 20,000 hours of use.
- 5000 Kelvin Daylight White Light: Provides a cool, crisp, natural light feel, suitable for various rooms.
- 에너지 효율성: 24 watts, equivalent to a 200-watt incandescent lamp, saving up to 88% on energy.
- High Illumination and Color Rendering: 2400 lumens, illuminating 15-20 square meters (150-220 square feet). CRI > 80 ensures accurate color representation.
- 다양한 응용 프로그램: Suitable for bedroom, kitchen, bathroom, porch, balcony, laundry room, entryway, foyer, lobby, corridor, dining hall, closet, utility room, or any other indoor/outdoor area.
- 비조광: This fixture is not compatible with dimmer switches.
기술 사양:
| 사양 | 값 |
|---|---|
| 상표 | 나병 |
| 모델명 | Lepro 11 inch Flush Mount LED Ceiling Light |
| 모델 번호 | EAN1500035-DW-EU |
| 크기 | 11-inch (28cm diameter, 1.97" height) |
| 색상 | 데이라이트 화이트 |
| 재료 | 플라스틱, 폴리카보네이트 |
| 왓tage | 24 와트 |
| 광 출력 | 2400루멘 |
| 색온도 | 5000 켈빈 |
| 연색지수(CRI) | >80 |
| 방수 레벨 | IP54 (방수) |
| 설치 유형 | 플러시 마운트 |
| 전원 | AC |
| 권tage | 240 볼트 |
| 수명 | >20,000시간 |
| 스위치 유형 | Push Button (external switch, not included) |
| 추천 용도 | Kitchen, Bathroom, Porch, Laundry Room, Basement, Hallway |

Image: Size comparison and illumination range for different wattag전자 모델.
5. 설정 및 설치
중요한: Ensure power is turned OFF at the circuit breaker before starting installation.
설치 비디오 가이드:
Video: Official Lepro installation instructions for ceiling lights.
단계별 설치:
- Step 1: Remove the Mounting Bracket. Gently press the bracket lock to detach the mounting bracket from the light fixture.
- Step 2: Measure Hole Spacing. Use the mounting bracket to mark the desired drill points on your ceiling. Ensure the spacing is appropriate for your ceiling type (wooden, cement, or junction box).
- Step 3: Install Mounting Bracket.
- 을 위한 나무 천장: Secure the bracket directly with screws.
- 을 위한 시멘트 천장: Drill two holes, insert wall anchors, then secure the bracket with screws.
- 을 위한 정션박스: Align the bracket with the junction box and secure it using the provided screws.
- Step 4: Paste Anti-Scratch Pads. Apply the provided anti-scratch pads to the back of the lamp body to protect the ceiling surface.
- Step 5: Connect the Wires. Open the waterproof wire compartment on the back of the fixture. Insert the live (L) and neutral (N) wires from your ceiling into the corresponding electrical connections. Ensure a secure connection.
- Step 6: Push in the Ceiling Light. Align the light fixture with the installed mounting bracket. Push the fixture upwards and twist clockwise until it locks securely into place.

이미지: 6단계 설치 과정에 대한 시각적 안내.
6. 사용 설명서
Once installed, restore power at the circuit breaker. Operate the light using your standard wall switch. This fixture provides a consistent 5000K Daylight White light and is 디밍 불가.
7. 유지관리
- 청소: 청소하기 전에 전원이 꺼져 있는지 확인하십시오. 부드러운 천으로 조명 기구를 닦으십시오.amp 천. 연마성 세척제나 용매를 사용하지 마십시오.
- 전구 교체: This fixture uses integrated LED lights and does not require bulb replacement. The LEDs are designed to last over 20,000 hours.
- 점검: 정기적으로 조명기구를 점검하여 손상이나 느슨한 연결 흔적이 있는지 확인하세요. 문제가 발견되면 전원을 분리하고 자격을 갖춘 전기 기술자에게 문의하세요.
8. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 조명이 켜지지 않습니다. | 고정 장치에 전원이 공급되지 않습니다. 느슨한 전선 연결. 벽 스위치에 결함이 있습니다. | 회로 차단기를 확인하십시오. Ensure wires are securely connected (power off first). 벽 스위치를 테스트해 보세요. |
| 빛이 깜박입니다. | 느슨한 전선 연결. 호환되지 않는 디머 스위치. | 전선 연결 상태를 확인하십시오 (먼저 전원을 끄십시오). This fixture is non-dimmable; ensure it's not connected to a dimmer. |
| 조명이 너무 어둡습니다. | Incorrect room size for light output. | Ensure the light's illumination range (15-20 sq. meters) is suitable for your room. |
9. 보증 및 지원
This Lepro LED Flush Mount Ceiling Light comes with a 한정 보증. For specific warranty terms, conditions, and to register your product, please visit the official Lepro web사이트를 방문하거나 고객 지원팀에 문의하세요.
For technical support or further assistance, please contact Lepro customer service:
- Web대지: www.lepro.com (or refer to product packaging for specific regional contact information)





