소개
The VILTROX JY-710-N3 is a versatile wireless camera timer remote control designed to enhance your photography experience. It offers various shooting modes including simple single shot, continuous shooting, Bulb mode, customized delay, and advanced timer plan shooting. This device helps minimize camera shake, ensuring sharper images, especially during long exposures or precise interval shooting. This manual provides detailed instructions for setup, operation, and maintenance of your JY-710-N3 remote control.
제품 끝view
The VILTROX JY-710-N3 system consists of a transmitter, a receiver, and a shutter release cable. The transmitter features an LCD display for setting parameters, while the receiver connects to your camera. The system operates on a 2.4GHz wireless frequency, providing a reliable connection.
Figure 1: VILTROX JY-710-N3 Wireless Camera Timer Remote Control components.
Figure 2: Close-up of the JY-710-N3 transmitter and receiver.
그림 3: 상세 view of the JY-710RX receiver.
주요 특징:
- Supports single shooting, 1-second continuous shooting, BULB shooting, delay shooting, and timer schedule shooting.
- Built-in FSK 2.4GHz wireless remote control system with 4 channels, offering a remoting distance of approximately 50-80 meters.
- Wired or wireless control options to prevent camera vibration during shutter release.
- Activates Bulb function on compatible cameras, allowing up to 399 shots.
- Modular design with separate transmitter, receiver, and shutter cord, allowing cable changes for different camera models.
설정
- 배터리 설치: Insert appropriate batteries into both the transmitter and receiver units. Ensure correct polarity.
- Connect Receiver to Camera:
- Locate the remote control port on your Nikon camera.
- Connect one end of the provided shutter release cable to the receiver unit.
- Connect the other end of the shutter release cable to your camera's remote control port.
- 전원 켜기: 송신기와 수신기 장치를 모두 켜십시오.
- 채널 매칭: Ensure both the transmitter and receiver are set to the same channel (1-4) for wireless communication. Refer to the device's display for channel selection.
Figure 4: Wireless setup with the remote control and camera.
Figure 5: Wired/wireless shutter release control for anti-shake photography.
작동 지침
The JY-710-N3 offers multiple shooting modes. Use the 세트 button and arrow keys on the transmitter to navigate and adjust settings on the LCD display.
Figure 6: Transmitter controls and display.
작동 모드 :
- Delay / Self Timer (DELAY):
Set a delay time (in 1-second increments) up to 99 hours, 99 minutes, and 99 seconds before the shutter is released. This is similar to your camera's self-timer function.
- Interval Timer (INTVL):
Program the remote to take exposures at regular intervals, up to 100 hours. For example, setting it to 10 minutes will trigger an exposure every 10 minutes until the exposure count limit is reached or manually stopped.
- BULB / Long Exposure (LONG):
Allows for extended exposure times, up to 100 hours. This mode is ideal for capturing light trails, astrophotography, or time-lapse sequences of slow-changing subjects like blooming flowers.
그림 7: 예amples of Bulb shooting applications.
Video 1: Time-lapse demonstration of flowers blooming, showcasing a practical application of the Bulb mode for extended capture.
- 노출 횟수(N):
Set the total number of exposures to be taken, up to 399 times. This works in conjunction with other modes like Interval Timer to define the total sequence length.
Figure 8: Transmitter and receiver functionality.
유지
- Keep the device dry. Do not expose to moisture or rain.
- 부드럽고 마른 천으로 닦으십시오. 강한 화학 약품이나 연마성 물질은 사용하지 마십시오.
- 장기간 기기를 사용하지 않을 경우 배터리 누출을 방지하기 위해 배터리를 제거하세요.
- 직사광선을 피해 시원하고 건조한 곳에 보관하세요.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 장치의 전원이 켜지지 않습니다. | 배터리가 방전되었거나 잘못 삽입되었습니다. | 배터리를 교체하거나 극성이 올바른지 확인하세요. |
| 리모컨으로 카메라가 작동하지 않습니다. |
|
|
| 무선 범위가 제한적입니다. | 방해 또는 장애물. | Move closer to the camera or clear line of sight. Avoid areas with strong electromagnetic interference. |
명세서
| 모델 번호 | JY-710-N3 |
| 무선 주파수 | FSK 2.4GHz |
| 채널 | 4 |
| 무선 거리 | 약 50~80미터 |
| 지연 타이머 | 0s to 99h 59min 59s (1s increments) |
| 간격 타이머 | 0s to 99h 59min 59s (1s increments) |
| Long Exposure (BULB) | 0s to 99h 59min 59s (1s increments) |
| 노출 횟수 | 1 to 399 shots |
| 호환 장치 | Nikon D7500, D7200, D7100, D600, D610, D5600, D5300, D7000, D5500, D3300, D750, D3200, D5200, D3100, D90, D5100, D5000 (and others with N3 type connector) |
| 품목 무게 | 6.4 온스 |
| 제조업체 | 심천 Jueying 기술 Co., 주식 회사. |
보증 및 지원
For warranty information and technical support, please refer to the official VILTROX web사이트를 방문하거나 가까운 대리점에 문의하세요. 보증 청구를 위해 구매 영수증을 보관하세요.
공식적인 Web대지: www.viltrox.com
