소개
The JBL Professional Control 52 is a stylish surface-mount satellite loudspeaker designed for subwoofer-satellite loudspeaker systems. It delivers superb high-fidelity sound through a low-distortion 60 mm (2.5 inch) driver. Key features include a secondary bucking magnet for high efficiency, a rubber half-roll surround for enhanced bass performance, a 19 mm (0.75 inch) copper-clad aluminum wire voice coil on a vented Nomex former for high fidelity and reliability, and a copper-capped pole piece for consistent impedance and extended high-frequency response. The included wall bracket allows for angling the speaker up to 45 degrees off-axis, providing flexible placement options.
주요 특징
- Wall-mount brackets included for flexible installation.
- 16 Ohms impedance and a frequency range of 140 Hz – 20 kHz.
- Stylish, unobtrusive design suitable for various decors.
- Compatible with JBL Control 42C in-ceiling and JBL Control 62P pendant satellite speakers for integrated systems.
- Designed to complement the JBL Control 50S/T Surface-Mount Subwoofer for a complete audio system.
상자 안에 무엇이 들어있나요?
- JBL Professional Control 52 Surface-Mount Satellite Speaker (Pair)
- 벽걸이 브라켓
- 사용 설명서 (본 문서)
설정 및 설치
The Control 52 satellite speakers are designed for surface mounting and come with all necessary brackets for installation. Ensure you have appropriate tools and follow local building codes for secure mounting.
그림 1: 전면 view of the JBL Control 52 Satellite Speaker.
스피커 장착
- 장착 위치 식별: Choose a location on a wall or other suitable surface that provides optimal sound dispersion and is structurally sound. The speakers can be angled up to 45 degrees.
- 브래킷 부착: Use the included wall-mount brackets. Securely attach the brackets to the chosen surface using appropriate screws and anchors (not included, depending on wall material).
- 배선 연결: 스피커 선을 연결하세요. amplifier to the binding posts on the back of each Control 52 speaker. Ensure correct polarity (red to positive, black to negative).
- 스피커 장착: Attach the Control 52 speakers to the installed brackets. The design allows for various orientations (vertical or horizontal) and angles.
Figure 2: A pair of JBL Control 52 Satellite Speakers, showing the integrated wall mounts.
배선 연결
The Control 52 speakers are passive and require an external amplifier. Connect the speaker wires to the spring-loaded terminals on the rear of each speaker. Match the positive (+) terminal on the speaker to the positive (+) terminal on your amp앰프의 음극(-) 단자와 헤드폰의 음극(-) 단자를 연결하세요. amp리퍼.
그림 3: 측면 view of the JBL Control 52 Satellite Speaker, highlighting the adjustable mounting bracket.
Video Guide: Speaker Wiring and Mounting
Video 1: This video demonstrates general speaker wiring and mounting techniques, which can be applied to the JBL Control 52 speakers. It shows how to connect speaker cables and secure speakers using brackets.
작동 지침
Once properly installed and connected to a compatible amplifier, the JBL Control 52 speakers are ready for use. These speakers are designed to work as part of a subwoofer-satellite system, meaning they handle mid-range and high frequencies, while a separate subwoofer handles the bass.
전원 켜기/끄기
The Control 52 speakers are passive and do not have their own power switch. They are powered by the connected amplifier. Turn your amplifier on or off to control the speakers.
볼륨 조절
볼륨을 조절하려면 다음을 사용하세요. amplifier or audio source. Avoid setting the volume too high, which can cause distortion and potentially damage the speakers.
최적의 배치
For the best audio experience, position the speakers to create a balanced sound field. Experiment with the angling feature of the wall brackets to direct sound towards the primary listening area. When used with a subwoofer, ensure the subwoofer is placed in a location that provides even bass distribution throughout the room.
유지
Regular maintenance helps ensure the longevity and optimal performance of your JBL Control 52 speakers.
- 청소: Use a soft, dry cloth to wipe the speaker cabinets. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
- 먼지 제거: Gently brush any dust from the speaker grilles using a soft brush or a vacuum cleaner with a brush attachment on a low setting.
- 환경 조건: These speakers are designed for indoor use. Avoid exposing them to extreme temperatures, direct sunlight, high humidity, or moisture, as they are not waterproof.
- 케이블 검사: Periodically check speaker cables for any signs of wear, fraying, or damage. Replace damaged cables immediately to prevent electrical hazards and maintain sound quality.
문제 해결
If you experience issues with your JBL Control 52 speakers, refer to the following common troubleshooting steps:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 스피커에서 소리가 나지 않음 |
|
|
| 왜곡되거나 불분명한 소리 |
|
|
| 스피커 1개가 작동하지 않음 |
|
|
명세서
| 모델명 | 컨트롤 52 |
| 상표 | 제이비엘 |
| 스피커 유형 | Satellite Speaker (for Subwoofer-Satellite Loudspeaker System) |
| 장착 유형 | 표면 실장 |
| 스피커 Amp화형 | 수동적인 |
| 임피던스 | 16옴 |
| 주파수 응답 | 140Hz ~ 20kHz |
| 스피커 최대 출력 전력 | 600와트(최대) |
| 우퍼 직경 | 60의 mm (2.5 인치) |
| 트위터 직경 | 19의 mm (0.75 인치) |
| 제품 치수 | 2"D x 5"W x 3"H (approximate, per speaker) |
| 품목 무게 | 3.7파운드(스피커당) |
| 색상 | 검은색 |
| 재료 | 알류미늄 |
| 실내/실외 사용 | 실내 |
| 연결 기술 | 열광한 |
| 추천 용도 | 서라운드 사운드 시스템용 |
| 한국어: | 050036905190 |
보증 및 지원
The JBL Professional Control 52 Surface-Mount Satellite Speaker comes with a Limited Warranty. For specific details regarding warranty coverage, duration, and terms, please refer to the warranty card included in your product packaging or visit the official JBL web대지.
For technical support, service, or additional product information, please contact JBL customer service or visit the Amazon의 JBL 스토어.
