1. 서론
This manual provides important instructions for the safe and proper use of your Parkside 6-piece router bit set. This set is designed for various woodworking applications and is compatible with the Parkside POF 1200 B2 router, as well as other routers accepting 8mm shank bits. Please read this manual thoroughly before using the router bits and retain it for future reference.
2. 일반 안전 지침
Always observe general safety precautions when working with power tools and accessories. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.
- 눈 보호: 파편으로부터 보호하기 위해 항상 승인된 안전 안경이나 고글을 착용하십시오.
- 청력 보호: Wear hearing protection during operation, as routers can produce high noise levels.
- 호흡기 보호: Wear a dust mask, especially when routing wood, to avoid inhaling wood dust.
- 작업 영역: Keep your work area clean, well-lit, and free from obstructions.
- 안전한 작업물: 항상 clamp the workpiece firmly to prevent movement during routing.
- 올바른 비트 설치: Ensure the router bit is correctly and securely inserted into the router's collet. Refer to your router's manual for specific instructions.
- 비트 검사: Before each use, inspect router bits for damage, dullness, or cracks. Do not use damaged bits.
- 라우터 속도: Match the router speed to the bit diameter and material. Larger bits and harder materials generally require lower speeds.
- 공급 방향: Always feed the router against the rotation of the bit to maintain control.
- 라우터의 전원을 뽑으세요: 비트를 변경하거나 설정을 조정하거나 유지 보수를 수행하기 전에 항상 라우터의 전원을 차단하십시오.
- 손을 깨끗이 유지하십시오: 회전하는 부분에 손과 손가락을 가까이 두지 마세요.
3. 제품 오버view (Router Bit Set)
This set includes 6 different carbide-tipped router bits designed for various woodworking profiles and tasks. Each bit features an 8mm shank for compatibility with suitable routers.
이미지 1: 이상view of the Parkside 6-piece router bit set. This image displays the various profiles of the carbide-tipped bits included in the set, designed for different woodworking applications.
The set typically includes common profile다음과 같습니다.
- Straight Bit: For cutting dados, rabbets, and grooves.
- Cove Bit: For creating decorative concave profiles.
- Chamfer Bit: For cutting angled edges.
- Round-Over Bit: For softening edges with a rounded profile.
- V-Groove Bit: For decorative V-shaped grooves and lettering.
- Dovetail Bit: For cutting dovetail joints.
Note: The exact profiles may vary slightly. Refer to the packaging for specific bit types included in your set.
4. 설정 및 비트 설치
- Ensure Router is Unplugged: Before installing or changing any router bit, always ensure the router is disconnected from the power supply.
- Clean Collet and Bit Shank: Inspect the router's collet and the bit shank for any dust, debris, or resin buildup. Clean them thoroughly to ensure a secure grip.
- 비트 삽입: Insert the shank of the desired router bit into the collet. Do not bottom out the bit in the collet. Insert it at least three-quarters of the way into the collet, leaving a small gap at the bottom. This provides maximum gripping surface and reduces vibration.
- 콜렛 너트를 조이세요: Use the appropriate wrenches (typically supplied with your router) to securely tighten the collet nut. Ensure it is tight enough to prevent the bit from slipping during operation, but do not overtighten.
- Check for Runout: After tightening, manually rotate the bit to ensure it spins freely and without excessive wobble (runout).
5. 사용 설명서
Always refer to your router's instruction manual for specific operating procedures. The following are general guidelines for using router bits:
- 재료 선택: These bits are designed for woodworking. Avoid using them on metal, concrete, or other non-wood materials.
- 깊이 조정: Adjust the routing depth on your router according to your project requirements. For deeper cuts, make multiple shallow passes instead of one deep pass to reduce strain on the bit and router, and to achieve a cleaner finish.
- 라우터 속도: Set the router speed appropriate for the bit size and wood type. Harder woods and larger diameter bits generally require lower RPMs. Softer woods and smaller bits can handle higher RPMs. Consult your router's manual or bit manufacturer's recommendations.
- 이송 속도 : Maintain a consistent and moderate feed rate. Feeding too fast can lead to poor cut quality, bit burning, and excessive wear. Feeding too slow can also cause burning and dulling of the bit.
- 절단 방향: Always route against the rotation of the bit. This provides better control and prevents the router from "climbing" over the workpiece.
- 시험용 절단: Always perform test cuts on scrap material before routing your final workpiece to verify settings and achieve the desired profile.
6. 유지관리
Proper maintenance extends the life of your router bits and ensures consistent performance.
- 청소: After each use, clean the bits to remove wood resin and dust. Use a specialized bit cleaner or a mild solvent and a brush. Avoid using abrasive materials that can damage the carbide tips.
- 점검: Regularly inspect bits for signs of wear, dullness, chipping, or cracks on the carbide tips. Also check the shank for any bending or damage. Replace damaged or excessively dull bits immediately.
- 저장: Store router bits in their original case or a dedicated bit storage tray to protect the carbide tips from damage and to prevent rust. Keep them in a dry environment.
- 날카롭게 하기: Carbide-tipped bits can be professionally sharpened, but this should only be done by experienced professionals to maintain the correct cutting geometry.
7. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Poor cut quality (rough, torn fibers) | Dull bit, incorrect feed rate, wrong router speed, bit runout. | Replace or sharpen bit, adjust feed rate, adjust router speed, check bit installation. |
| Burning of workpiece | Dull bit, too slow feed rate, incorrect router speed, making too deep a cut in one pass. | Replace or sharpen bit, increase feed rate, adjust router speed, make multiple shallow passes. |
| 과도한 진동이나 소음 | Loose bit, bent shank, damaged bit, incorrect router speed. | Re-tighten bit, inspect bit for damage (replace if necessary), adjust router speed. |
| Bit breaks or chips | Overtightening collet, hitting foreign objects in wood, excessive force, incorrect feed rate. | Ensure proper collet tightening, inspect wood for foreign objects, use appropriate force and feed rate. Replace broken bit. |
8. 사양
- 제품 모델: 91104255275390
- 상표: 파크사이드
- 재료: Carbide (Hard Metal)
- 섕크 직경: 8 mm (compatible with Parkside POF 1200 B2 and similar routers)
- 비트 수: 6
- Number of Flutes (typical): 2
- 용도: 목공
9. 보증 및 지원
For warranty information, please refer to the documentation provided with your purchase or contact your retailer. Parkside products typically come with a manufacturer's warranty against defects in materials and workmanship.
For technical support or inquiries regarding replacement parts, please contact Parkside customer service or visit the official Parkside web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.
제조업체: 파크사이드
제품 참조: 91104255275390