1. 서론
This manual provides detailed instructions for the assembly, installation, operation, and maintenance of your MaxxHaul 70115 Roof Rack Cargo Carrier. Please read this manual thoroughly before use to ensure proper function and safety.
The MaxxHaul 70115 roof rack is constructed from durable steel with a powder coat finish, designed to provide instant cargo space for vehicles equipped with crossbars. It includes rubber gaskets to prevent internal rusting and U-bolts with rubber caps to protect transported cargo.
2. 중요한 안전 정보
경고: 이러한 안전 지침을 따르지 않을 경우 재산 피해나 인명 피해가 발생할 수 있습니다.
- 최대 적재 용량을 초과하지 마십시오. 150파운드(68kg). Ensure weight is distributed evenly.
- Always ensure the cargo carrier is securely attached to your vehicle's crossbars before driving.
- Regularly check all bolts, nuts, and connections for tightness, especially before and after long trips.
- Do not overload the carrier. Secure all cargo properly with appropriate tie-downs or cargo nets.
- Be aware of increased vehicle height and width when the cargo carrier is installed, especially when entering garages, car washes, or low-clearance areas.
- Adjust driving speed according to road conditions and cargo load. High speeds with a loaded roof rack can affect vehicle stability and fuel efficiency.
- 이 제품에는 캘리포니아주에서 암과 선천적 기형 또는 기타 생식 기능 장애를 유발하는 것으로 알려진 화학 물질이 포함되어 있습니다(제안 65호 경고).
3. 패키지 내용
조립을 시작하기 전에 모든 구성 요소가 있는지 확인하세요.
- 1 Steel Roof Rack (consisting of Front, Middle, and Rear sections)
- Assembly and Mounting Hardware (including U-bolts, rubber caps, washers, screws, and gaskets)
Image: All components and hardware included with the MaxxHaul 70115 Roof Rack.
4. 사양
| 모델 번호 | 70115 |
| 치수(길이 x 너비 x 높이) | 46 x 36 x 4.5인치(116.8 x 91.4 x 11.4cm) |
| 하중 용량 | 150파운드(68kg) |
| 재료 | Steel with Powder Coat Finish |
| 장착 유형 | 지붕 장착형, 크로스바 장착형 |
| 자동차 적합 유형 | Universal Fit (for most crossbars) |
| 품목 무게 | 25파운드(11.3kg) |
Image: MaxxHaul 70115 Roof Rack with indicated dimensions: 46 inches length, 36 inches width, 4.5 inches height.
5. 조립 및 설치
Follow these steps for proper assembly and installation of your MaxxHaul 70115 Roof Rack. Refer to the assembly diagram for visual guidance.
Image: Detailed assembly guide for the MaxxHaul 70115 Roof Rack, showing four steps.
5.1. 랙 조립
- Step 1: Connect Rack Sections
Place the three sections of the basket (Front Rack Section #4, Middle Rack Section #7, Rear Rack Section #8) on a flat surface. Match the ends with Marking "A" and "B" as indicated in the diagram. Ensure the sections align correctly.
- Step 2: Install Gaskets
Lubricate the inside of the Large Gasket (#5) and Small Gasket (#6) with grease. Slide these gaskets onto the four ends of the Middle Rack Section (#7). These gaskets help prevent internal rusting.
- 3단계: 보안 연결
Ensure the "A" marking end in the front section connects to the "A" marking end in the middle section. Similarly, ensure the "B" marking end in the rear section connects to the "B" marking end in the middle section. Align the holes and secure the connections using the provided Washers (#2) and Screws (#1). Attach the Rear Section to the Middle Section, then the Front Section to the Middle Section, aligning holes and securing with washers and screws.
- 4단계: 최종 체결
Slide the remaining gaskets next to the Screws (#1) and Washers (#2). Tighten all connections securely. Do not overtighten.
5.2. 차량 가로대에 장착
The MaxxHaul 70115 attaches to most factory and aftermarket crossbars using easy-to-use U-bolts. Ensure your vehicle's crossbars meet the following requirements:
- Minimum height of crossbar: 3/4 inch
- Maximum height of crossbar: 1-3/4 inches
- Maximum width of crossbar: 6 inches
Image: Close-up of the universal mounting bracket used to attach the roof rack to crossbars.
- Position the assembled cargo carrier centrally on your vehicle's crossbars.
- Place the universal mounting brackets over the crossbars and align them with the pre-drilled holes on the cargo carrier.
- Insert the U-bolts from underneath the crossbars, through the mounting brackets, and into the cargo carrier frame.
- Thread the rubber caps onto the exposed ends of the U-bolts inside the cargo carrier. These caps protect your cargo from sharp edges.
- Hand-tighten the nuts onto the U-bolts, ensuring the carrier is firmly secured to the crossbars.
- Verify that the carrier is stable and does not wobble. Adjust and tighten as necessary.
6. 운영 지침
6.1. 화물 적재
- 최대 하중 용량은 150파운드(68kg)를 초과하지 마십시오.
- Distribute cargo weight as evenly as possible across the carrier. Place heavier items at the bottom and center.
- Secure all items within the basket using appropriate cargo nets, straps, or tie-downs to prevent shifting or falling during transit.
- Ensure no items obstruct your view 또는 차량 작동을 방해합니다.
Image: A vehicle equipped with the MaxxHaul roof rack, demonstrating its use for carrying luggage and other items.
6.2. Driving with a Loaded Carrier
- Drive cautiously, especially when cornering, braking, or in windy conditions.
- Be mindful of increased vehicle height and potential wind resistance, which may affect fuel economy.
- Periodically check cargo security and carrier attachment during long journeys.
7. 관리 및 유지 보수
- 정기 검사: Before each use, inspect the carrier for any signs of damage, loose connections, or wear.
- 청소: Clean the carrier with mild soap and water. Avoid abrasive cleaners that could damage the powder coat finish.
- 녹 방지: The carrier features a powder coat finish for rust resistance. However, to prolong its lifespan, especially in harsh environments, consider storing the rack indoors when not in use. Applying a truck bed liner paint or similar protective coating can further enhance rust protection.
- 하드웨어: Ensure all U-bolts and other fasteners remain tight. Replace any worn or damaged hardware immediately.
8. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Rack feels loose or wobbles after installation. | U-bolts or assembly screws are not sufficiently tightened. | Re-check and securely tighten all U-bolts and assembly screws. Ensure mounting brackets are correctly positioned. |
| 주행 중 과도한 풍절음. | Airflow over the rack, especially when empty. | Ensure the wind deflector is properly installed. Consider adding a fairing if noise persists (not included). Reduce speed. |
| 운송 중 화물이 움직이는 현상. | Cargo not adequately secured. | Always use appropriate cargo nets, straps, or tie-downs to firmly secure all items within the carrier. Distribute weight evenly. |
| Rust spots appearing on the rack. | Exposure to harsh weather conditions; damage to powder coat. | Clean affected areas, sand lightly, and apply rust-inhibiting paint or truck bed liner paint. Store indoors when possible. |
9. 보증 및 고객 지원
For specific warranty information regarding your MaxxHaul 70115 Roof Rack Cargo Carrier, please refer to the documentation included with your purchase or contact MaxxHaul customer support directly.
If you have questions about assembly, installation, or require technical assistance, please visit the official MaxxHaul web해당 웹사이트를 방문하거나 고객 서비스 부서에 문의하십시오. 연락처 정보는 일반적으로 제품 포장이나 제조업체의 안내에 나와 있습니다. web대지.
제조업체: MAXXHAUL
자세한 내용은 다음을 방문하세요. MAXXHAUL Store on Amazon.
