1. 서론
This manual provides essential instructions for the installation, operation, and maintenance of the BFT Ares 1500 Ultra 24V Automatic Sliding Door Motor. Please read this manual thoroughly before installation and use to ensure proper function and safety.
The BFT Ares 1500 Ultra is designed for automating sliding doors with a maximum weight capacity of 1500kg. It features a 24V motor, magnetic end switches, and a central display for configuration.
2. 안전 정보
중요 안전 지침:
- Ensure all electrical connections are performed by a qualified technician.
- 유지보수 또는 수리 작업을 하기 전에 전원을 차단하십시오.
- Keep children and pets away from the operating area of the door.
- Do not attempt to repair the motor if you are not qualified. Contact authorized service personnel.
- This product is designed for sliding doors up to 1500kg. Do not exceed this weight limit.
3. 제품 오버view
The BFT Ares 1500 Ultra motor is a robust solution for heavy-duty sliding gates. Key features include:
- 24V motor for reliable operation.
- Maximum load capacity of 1500kg.
- Door speed of approximately 9m/min.
- Magnetic end switches for precise stopping.
- Integrated central display for easy programming and diagnostics.
- D-Track electronic impact system for slow open/close reaction and enhanced safety.
그림 1: 앞쪽 view of the BFT Ares 1500 Ultra automatic sliding door motor. The image shows the dark grey casing with a red indicator light and a red access panel labeled "ULTRA" with a keyhole.
4. 설정 및 설치
Installation should only be performed by qualified personnel in compliance with local regulations and safety standards.
- 모터 장착: Securely mount the motor unit on a stable, level surface adjacent to the sliding door track. Ensure proper alignment with the door's rack.
- 전기 연결: Connect the 24V power supply and control wiring according to the wiring diagram provided in the full installation manual (not included here). Ensure all connections are tight and insulated.
- 리미트 스위치 조정: Adjust the magnetic end switches to define the open and closed positions of the door.
- 랙 설치: Install the gear rack securely to the sliding door, ensuring proper engagement with the motor's pinion gear.
Refer to the comprehensive installation guide for detailed wiring diagrams and mounting instructions.
5. 사용 설명서
Once installed and powered, the BFT Ares 1500 Ultra can be operated via its integrated control unit or external remote controls (if configured).
- 초기 전원 켜기: Upon first power-up, the system may perform an auto-calibration cycle to learn the door's travel limits.
- 제어판 사용: The central display allows for programming various parameters, including opening/closing speed, pause time, and safety features. Navigate through menus using the integrated buttons.
- 원격 제어 작동: If remote controls are paired, press the designated button to open, close, or stop the door.
- 수동 릴리스: In case of power failure, the motor can be manually disengaged using the key-operated release mechanism located on the unit. Insert the key and turn to disengage the motor, allowing manual door movement.
6. 유지관리
Regular maintenance ensures optimal performance and longevity of your BFT Ares 1500 Ultra motor.
- 월간 간행물:
- Inspect the sliding door track and rack for debris or obstructions. Clean as necessary.
- Check for smooth operation of the door.
- Verify that safety features (e.g., photocells, D-Track system) are functioning correctly.
- 매년:
- Lubricate moving parts of the door and motor (refer to specific lubricant recommendations in the full manual).
- Inspect electrical connections for wear or corrosion.
- Have a qualified technician perform a comprehensive system check.
Do not use abrasive cleaners or solvents on the motor casing.
7. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 모터가 명령에 반응하지 않습니다. | No power supply; remote control battery flat; safety device activated. | Check power connection; replace remote battery; inspect safety sensors for obstructions. |
| 작동 중 문이 예기치 않게 멈춥니다. | Obstruction detected by D-Track system; faulty limit switch. | Remove obstruction; check limit switch wiring and adjustment. |
| 문이 천천히 또는 뻑뻑하게 열립니다. | Friction in door mechanism; low voltage; motor overload. | Lubricate door components; check power supply; reduce door friction. |
If problems persist, contact BFT technical support or a qualified service technician.
8. 기술 사양
| 특징 | 사양 |
|---|---|
| 모델 | Ares 1500 Ultra |
| 상표 | 비피에이치피(BFT) |
| 모터볼tage | 24V |
| 최대 도어 무게 | 1500kg |
| Door Speed | 9m/분 |
| 전력 소비 | 240와트 |
| End Switch Type | 자기 |
| 품목 무게 | 12kg |
| 필요한 배터리 | 아니요 |
| ASIN | B0733LLJJQ |
| 첫 번째 이용 가능 | 16 년 2020 월 XNUMX 일 |
9. 보증 및 지원
For warranty information, please refer to the documentation provided with your purchase or contact your authorized BFT dealer. Technical support can be obtained through your local BFT service center or by visiting the official BFT web대지.
Always provide your product model (Ares 1500 Ultra) and serial number when contacting support.
