Pirelli Angel Scooter Tire User Manual

1. 서론

This manual provides essential information for the safe and effective use of your Pirelli Angel Scooter tire. The Pirelli Angel Scooter tire is engineered for reliable and comfortable riding, offering superior road grip and short braking distances due to its specially designed compound. It enhances safety during cornering and features an environmentally friendly compound.

주요 특징은 다음과 같습니다.

• Designed for summer conditions.
• Specifically for motorcycles/scooters.
• Packaged securely for transport.

그림 1: Pirelli Angel Scooter tire. This image displays the Pirelli Angel Scooter tire, highlighting its tread pattern and sidewall markings, mounted on a silver wheel.

2. 설정 및 설치

Proper installation of your Pirelli Angel Scooter tire is crucial for safety and performance. It is strongly recommended that tire installation be performed by a qualified professional using appropriate tools and techniques.

2.1 설치 전 확인 사항

• 호환성: Ensure the tire size (130/80-16) and specifications (Load Index 64, Speed Rating P) match your scooter manufacturer's recommendations.
• 점검: Before mounting, visually inspect the tire for any manufacturing defects or damage that may have occurred during shipping.
• 림 상태: Ensure the wheel rim is clean, free from damage, corrosion, or sharp edges that could harm the tire bead.

2.2 Mounting Procedure (Professional Installation Recommended)

1. 기존 타이어를 제거하세요: Deflate and remove the old tire from the rim carefully.
2. 매끄럽게 하기: 타이어 비드와 림 플랜지에 적절한 타이어 장착 윤활제를 바르십시오.
3. 설치: Mount the new Pirelli Angel Scooter tire onto the rim, ensuring the rotation direction arrow (if present) aligns with the forward direction of the vehicle.
4. 인플레이션: Inflate the tire slowly to the recommended pressure, ensuring both beads seat properly on the rim. Do not exceed the maximum seating pressure specified on the tire sidewall.
5. 균형: Balance the wheel and tire assembly to prevent vibrations and ensure even wear.
6. 최종 확인: Verify that the tire is correctly seated, inflated to the manufacturer's recommended pressure, and free from leaks.

3. 운영 지침

Adhering to proper operating practices will maximize the lifespan and safety performance of your Pirelli Angel Scooter tire.

3.1 타이어 공기압

• Maintain tire pressure according to your scooter manufacturer's specifications. Check pressure when tires are cold.
• Incorrect tire pressure can lead to premature wear, reduced handling, and increased risk of tire failure.

3.2 적응 기간

• New tires require a break-in period of approximately 100-200 kilometers (60-120 miles) to allow the tire's components to settle and release any mold lubricants.
• During this period, avoid sudden acceleration, hard braking, and aggressive cornering.

3.3 Load and Speed Ratings

• Do not exceed the tire's maximum load capacity (Load Index 64) or speed rating (Speed Rating P).
• Overloading or exceeding the speed rating can lead to tire damage, overheating, and potential failure.

4. 유지관리

Regular maintenance is essential for extending the life of your tire and ensuring continued safety.

4.1 정기 점검

• 트레드 깊이: Regularly check the tread depth. Replace the tire when the tread wears down to the minimum legal limit (typically 1.6mm in many regions) or when the tread wear indicators (TWI) become flush with the tread surface.
• 손상: Inspect the tire for cuts, punctures, bulges, cracks, or any other signs of damage. Any significant damage should be assessed by a professional.
• 고르지 않은 마모: Check for signs of uneven tread wear, which could indicate issues with tire pressure, wheel alignment, or balancing.

4.2 청소 및 보관

• 타이어는 순한 비누와 물로 세척하십시오. 고무를 손상시킬 수 있는 독한 화학 물질이나 석유계 제품은 사용하지 마십시오.
• When storing a scooter for an extended period, ensure tires are properly inflated and ideally off the ground to prevent flat spots. Store in a cool, dry place away from direct sunlight and ozone-producing equipment.

5. 문제 해결

This section addresses common issues you might encounter with your scooter tire.

5.1 기압 손실

• 원인: 펑크, 밸브 스템 누출, 림 손상 또는 비드 장착 불량.
• 해결책: Inspect the tire for punctures. Check the valve stem for damage. If a puncture is found, consult a professional for repair or replacement. Do not attempt to repair punctures outside the tire's repairable area or if the damage is extensive.

5.2 Vibrations or Uneven Ride

• 원인: Unbalanced wheel, bent rim, uneven tire wear, or suspension issues.
• 해결책: Have the wheel and tire assembly re-balanced by a professional. Inspect the rim for damage. Check tire pressure and tread wear. If issues persist, consult a mechanic for suspension inspection.

5.3 Rapid or Uneven Tread Wear

• 원인: Incorrect tire pressure, improper wheel alignment, aggressive riding style, or worn suspension components.
• 해결책: Ensure tire pressures are consistently maintained at recommended levels. Have wheel alignment checked by a professional. Adjust riding habits if necessary.

6. 사양

Detailed technical specifications for the Pirelli Angel Scooter tire model PIRELLI 130/80 -16 64P ANGEL SCOOTER TL.

7. 보증 및 지원

For specific warranty information regarding your Pirelli Angel Scooter tire, please refer to the documentation provided at the time of purchase or contact Pirelli customer service directly. Warranty terms and conditions typically cover manufacturing defects.

For technical support or further inquiries, please contact your authorized Pirelli dealer or visit the official Pirelli web대지.