소개
Thank you for choosing the WALI M001LP Laptop and Monitor Mount. This product is designed to provide an ergonomic and flexible solution for mounting your laptop and monitor, optimizing your workspace. This manual provides detailed instructions for safe installation, operation, and maintenance of your mount. Please read this manual thoroughly before installation and keep it for future reference.
안전 정보
- 중량 용량: Do not exceed the maximum weight capacity of 22 lbs (10 kg) per arm. Exceeding this limit may result in serious injury or product damage.
- 책상 두께: Ensure your desk meets the minimum and maximum thickness requirements for the chosen installation method (C-clamp or grommet base).
- VESA 호환성: 설치하기 전에 모니터가 VESA 규격(75x75mm 또는 100x100mm)과 호환되는지 확인하십시오.
- 집회: Assemble the product exactly as instructed. Improper assembly can lead to damage or injury.
- 움직이는 부품: Be cautious of pinch points when adjusting the mount.
- 어린이들: Keep small parts away from children as they may pose a choking hazard.
- 도구: 설치에 적합한 도구를 사용하십시오.
패키지 내용
Please verify that all parts are present and undamaged before assembly. If any parts are missing or damaged, please contact WALI customer service.
- 1x WALI Extra High Desk Mount for Monitor with Laptop Tray (Black)
- 1x Mounting Hardware Kit
- 1x 사용자 설명서
명세서
| 상표 | 왈리 |
| 모델 번호 | M001LP |
| 색상 | 검은색 |
| 재료 | 금속 |
| 장착 유형 | Table Mount (C-clamp 또는 그로밋) |
| 이동 유형 | 관절 |
| 호환 노트북 크기 | 최대 17인치 |
| 호환 모니터 크기 | 최대 27인치 |
| 중량 용량 | 팔당 22kg(10파운드) |
| VESA 호환성 | 75x75mm, 100x100mm |
| Laptop Tray Dimensions | 14 x 11 inches (L x W) with 0.6 inch (1.5 cm) bottom lip |
| 극 높이 | 16인치(40cm) |
| C-clamp 책상 두께 | 0.4~4인치(1~10.2cm) |
| 그로밋 베이스 데스크 두께 | 0.4 - 3 inches (1 - 7.6 cm) for 4 inch (10.2 cm) hole diameter |
| Monitor Arm Tilt | +/- 90도 |
| 모니터 암 회전 | 360도 |
| Monitor Arm Rotation | 360 degrees (Landscape to Portrait) |
| Laptop Tray Tilt | +/- 15도 |
The mount features a ventilated laptop tray to prevent overheating and a 0.6-inch (1.5 cm) bottom lip to secure your laptop.
Image: Display Compatibility - Max 22lbs per arm, Max 17" laptop, Max 27" monitor, VESA 75x75mm & 100x100mm.
Image: Product Dimensions - Illustrates the 16-inch pole height and arm extensions.
설정 및 설치
The WALI M001LP mount offers two installation options: C-clamp 그리고 그로밋 베이스를 사용하세요. 책상에 가장 적합한 방법을 선택하십시오.
1. C-clamp 설치
- C-cl을 부착하세요amp to the bottom of the main pole.
- C-cl을 위치시키세요amp 책상 가장자리에.
- C-cl을 조입니다amp screw until the mount is securely fastened to the desk. Ensure the desk thickness is between 0.4 and 4 inches (1-10.2 cm).
2. 그로밋 베이스 설치
- 책상에 케이블 구멍이 있다면 케이블 덮개를 제거하세요.
- Insert the grommet base through the hole.
- Secure the grommet base from underneath the desk using the provided hardware. Ensure the desk thickness is between 0.4 and 3 inches (1-7.6 cm) and the hole diameter is up to 4 inches (10.2 cm).
3. Attaching Arms and Devices
- Slide the monitor arm and laptop tray arm onto the main pole. Adjust their height as desired and secure them with the provided screws.
- 모니터의 경우: Attach the VESA plate to the back of your monitor using the appropriate screws. Then, slide the monitor with the attached VESA plate onto the monitor arm.
- 노트북: Place your laptop onto the laptop tray. The 0.6-inch (1.5 cm) bottom lip will help secure it.
Image: Installation Flexibility - C-clamp for desk thickness 0.4"-4", Grommet Base for desk thickness 0.4"-3".
4. 케이블 관리
Utilize the integrated cable management clips along the arms and pole to route your cables neatly. This helps maintain a clean and organized workspace.
Image: Clean Cable Management - Cables are routed through clips on the mount for an organized desk.
운영 및 조정
The WALI M001LP mount offers multiple adjustment points for optimal view편안함을.
- 높이 조정: Loosen the screws on the arms to slide them up or down the 16-inch (40 cm) pole to achieve your desired height. Retighten securely.
- Monitor Arm Tilt: The monitor arm can tilt +/-90 degrees to reduce glare and optimize view각도를 나타냅니다.
- Monitor Arm Swivel: Swivel the monitor arm 360 degrees at various joints to share your screen or change view잉 방향.
- Monitor Arm Rotation: Rotate your monitor 360 degrees to switch between landscape and portrait orientation.
- Laptop Tray Tilt: The laptop tray can be tilted +/-15 degrees for ergonomic typing or view주고받음.
Adjustments should be made smoothly. If an adjustment feels too loose or too stiff, check the tension screws on the joints and tighten or loosen them as needed.
Image: Angle Adjustment - Shows 180-degree swivel, +/-15-degree laptop tilt, and ventilated tray.
유지
- 청소: 부드러운 천으로 마운트를 닦아주세요.amp 천으로 닦아주세요. 마감재를 손상시킬 수 있는 연마성 세제나 용제는 사용하지 마세요.
- 정기 점검: 모든 나사와 연결부가 단단히 조여져 있는지 정기적으로 점검하세요. 필요하면 다시 조이세요.
- 매끄럽게 하기: No lubrication is typically required for the moving parts. If any joints become stiff, ensure they are clean and free of debris.
문제 해결
- 마운트가 불안정합니다: C-cl을 확인하십시오amp or grommet base is securely tightened to the desk. Check that all arm connections to the pole are tight. Verify that the combined weight of your devices does not exceed the 22 lbs (10 kg) per arm capacity.
- Monitor/Laptop sags or won't stay in position: Tighten the tension screws on the relevant arm joints. These screws control the friction and holding power of the tilt and swivel mechanisms.
- Difficulty adjusting arms: Loosen the tension screws slightly on the stiff joints. Ensure no cables are snagged or obstructing movement.
- Laptop slides off the tray: Ensure the laptop is placed correctly against the bottom lip of the tray. If the tray is tilted significantly, ensure the laptop's weight distribution is balanced.
보증 및 지원
WALI is committed to providing quality products and customer satisfaction. While specific warranty details are not provided in this manual, WALI offers experienced and friendly US-based customer service available 7 days a week to assist you with any questions or issues you may encounter.
For support, please refer to the contact information provided with your product packaging or visit the official WALI web대지.
