1. 서론
The COMPUTHERM Q7RF wireless room thermostat is designed for precise control of heating and air conditioning systems. This programmable device allows you to set individual temperature schedules for each day of the week, optimizing comfort and energy efficiency in your home or office. Its wireless design offers flexible placement of the thermostat unit, while the receiver unit connects directly to your boiler or air conditioning system, compatible with both 24V and 230V control circuits.
2. 패키지 내용
패키지에 모든 구성품이 들어 있는지 확인하세요.
- 4 x COMPUTHERM Q7RF Room Thermostat (Transmitter Unit)
- 4 x COMPUTHERM Q7RF Receiver Unit
- 사용 설명서 (본 문서)
- 장착 나사 및 벽면 플러그
3. 제품 오버view
The COMPUTHERM Q7RF system consists of two main components: the thermostat unit (transmitter) and the receiver unit. The thermostat unit measures the room temperature and allows you to set desired temperatures and programs. The receiver unit connects to your heating or cooling system and switches it on or off based on signals from the thermostat unit.
그림 1: 이상view of the COMPUTHERM Q7RF 4-piece set, showing multiple thermostat and receiver units.
Figure 2: A single COMPUTHERM Q7RF thermostat unit communicating wirelessly with its receiver unit.
3.1 Thermostat Unit (Transmitter)
- LCD 디스플레이: Shows current temperature, set temperature, time, day, and program status.
- 제어 버튼: For setting temperature, time, and programming schedules.
- 배터리 칸: 전원 공급용.
3.2 수신기 유닛
- 배선 터미널: For connection to the heating/cooling system.
- 상태 표시기 : LEDs to show power and relay status.
- 수동 재정의 버튼: For temporary manual control.
4. 사양
| 특징 | 사양 |
|---|---|
| 상표 | 컴퓨터 |
| 모델 | Q7RF |
| 스위칭 볼륨tage | 24V AC/DC, ... 250V AC, 50Hz |
| 전력 소비 | 6W |
| 온도 측정 범위 | 3 – 45°C (in 0.1°C increments) |
| 조정 가능한 온도 범위 | 5 – 40°C (in 0.5°C increments) |
| 온도 측정 정확도 | ±0.5°C |
| 컨트롤러 유형 | 푸시 버튼 |
| 연결 기술 | 무선(무선 주파수) |
| 특별 기능 | Programmable, Compatible with various system voltages |
5. 설정 및 설치
5.1 Thermostat Unit Placement and Battery Installation
- 위치를 선택하세요: Place the thermostat unit in a central area of the room where it can accurately measure the ambient temperature, away from direct sunlight, drafts, or heat sources.
- 배터리 설치: Open the battery compartment on the back of the thermostat unit. Insert the required batteries (typically AA or AAA, refer to the unit's markings) ensuring correct polarity. Close the compartment.
- 전원 켜기: The display should light up, indicating the unit is powered.
5.2 Receiver Unit Wiring
WARNING: Electrical installation should only be performed by a qualified electrician. Disconnect power to the heating/cooling system before proceeding.
- 수신기를 장착하십시오: Secure the receiver unit near your boiler or air conditioning system using the provided screws and wall plugs.
- 배선 단자 접근: Open the cover of the receiver unit to expose the wiring terminals.
- 시스템에 연결: Connect the receiver unit to the two-wire room thermostat connection point of your boiler or AC system. Ensure connections are secure and follow the wiring diagram provided with your heating/cooling system and the receiver unit. The COMPUTHERM Q7RF is compatible with both 24V and 230V control circuits.
- 복원력 : Once wiring is complete and verified, close the receiver unit cover and restore power to your heating/cooling system.
5.3 Pairing the Units (If not pre-paired)
Refer to the specific instructions provided with your Q7RF set for pairing procedures. Typically, this involves pressing a pairing button on the receiver unit and then initiating a pairing sequence on the thermostat unit within a short timeframe. A successful pairing will usually be indicated by an LED on the receiver or a message on the thermostat display.
6. 사용 설명서
6.1 LCD 디스플레이 이해
The LCD display provides all necessary information about the thermostat's current status and settings.
그림 3: 상세 view of the COMPUTHERM Q7RF LCD display, illustrating various indicators such as program number, manual modification symbol, weekdays, time, set temperature, actual room temperature, low battery symbol, boiler ON state, and timed control symbol.
- 주중: 현재 요일을 나타냅니다.
- Exact Time / Time Left: Displays the current time or time remaining for a manual modification.
- 프로그램 번호: Shows the active program segment.
- 설정 온도: The desired temperature set by the user.
- Actual Room Temperature: The current temperature measured by the thermostat.
- Symbol for Manual Modification: Indicates that the thermostat is currently operating under a temporary manual override.
- Temp. Modified until next manual intervention: Shows the duration of a temporary temperature change.
- Symbol for Low Battery Voltage: 배터리 교체가 필요할 때 나타납니다.
- Symbol for Boiler ON State: 난방/냉방 시스템이 작동 중일 때를 나타냅니다.
- Symbol for Timed Control: Indicates that a programmed schedule is active.
6.2 현재 시간 및 요일 설정
- 를 누르세요 시간 단추.
- 사용하세요 + or - 시간을 조정하려면 버튼을 누른 다음 누르세요. 시간 다시 확인합니다.
- 분 단위와 요일 단위로 반복하세요.
6.3 수동 온도 조정
- 정상 작동 모드에서는 다음을 누릅니다. + or - 버튼을 눌러 원하는 온도를 조절하세요.
- The new temperature will be maintained until the next programmed time slot or until manually overridden again.
6.4 Programming Daily/Weekly Schedules
The Q7RF allows for independent programming for each day of the week. You can typically set multiple time periods with different temperatures for each day.
- 를 누르세요 음식물 버튼을 눌러 프로그래밍 모드로 들어갑니다.
- 사용하세요 낮 button to select the day you wish to program (e.g., MON, TUE, etc.).
- 사용하세요 시간 그리고 +/- buttons to set the start time for the first program period.
- 사용하세요 온도 설정 그리고 +/- 이 기간 동안 원하는 온도를 설정하려면 버튼을 누르세요.
- 누르다 음식물 again to move to the next program period for the same day, or use 낮 다음 날로 이동하기 위해.
- Repeat until all desired periods and days are programmed.
- 를 누르세요 달리다 or EXIT button to save and exit programming mode.
7. 유지관리
7.1 배터리 교체
When the low battery symbol appears on the LCD display, replace the batteries immediately to ensure continuous operation. Use new, high-quality alkaline batteries of the specified type.
- Open the battery compartment cover on the back of the thermostat unit.
- 오래된 배터리를 제거하세요.
- Insert new batteries, observing correct polarity (+/-).
- 배터리 덮개를 닫습니다.
7.2 청소
Clean the thermostat and receiver units with a soft, dry cloth. Do not use abrasive cleaners, solvents, or spray directly onto the units, as this may damage the electronics or finish.
8. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 온도 조절기 디스플레이가 비어 있음 | 배터리가 방전됨 | 배터리를 새것으로 교체하세요. |
| 난방/냉방 시스템이 응답하지 않습니다 | 1. Receiver unit not powered 2. Units not paired 3. Wiring issue 4. 범위를 벗어남 | 1. Check power supply to receiver. 2. Perform pairing procedure (Section 5.3). 3. Verify wiring connections (Section 5.2). 4. Move thermostat closer to receiver or check for obstructions. |
| 잘못된 온도 판독값 | Thermostat placed in unsuitable location (direct sun, draft) | Relocate thermostat to a more central and stable temperature area. |
| Programmed schedule not active | Thermostat in manual override mode | Exit manual override mode (e.g., press RUN/AUTO button) to resume programmed operation. |
9. 보증 및 지원
COMPUTHERM products are manufactured to high-quality standards. For warranty information, please refer to the warranty card included with your product or contact your retailer. For technical support, please reach out to the COMPUTHERM customer service or your local distributor. Keep your purchase receipt as proof of purchase.
