1. 서론
This instruction manual provides detailed information on the proper use and care of your Canon BG-E21 Battery Grip. Designed specifically for the Canon EOS 6D Mark II digital SLR camera, this accessory enhances shooting capabilities by extending battery life and improving handling for vertical photography.
2. 주요 특징
- Extended Shooting Capacity: Allows the use of up to two LP-E6N lithium-ion battery packs, significantly increasing shooting time.
- Enhanced Vertical Shooting: Features an auxiliary shutter release button and additional controls for comfortable and stable vertical format photography.
- 향상된 인체공학적 설계: Provides a more substantial grip, especially beneficial for users with larger hands or when using heavy lenses.
- 카메라 커뮤니케이션: Maintains full communication with the camera, allowing accurate battery level display.
- 삼각대 마운트: Includes a tripod mount on the base for secure attachment to tripods or monopods.
3. 호환성
The Canon BG-E21 Battery Grip is compatible with the following camera models:
- Canon EOS 6D Mark II (body only)
- Canon EOS 6D Mark II EF 24-105mm f/3.5-5.6 IS STM kit
- Canon EOS 6D Mark II EF 24-105mm f/4L IS II USM kit
- Refurbished Canon EOS 6D Mark II body
4. 패키지 내용
패키지에 모든 품목이 들어 있는지 확인하세요.
- Canon BG-E21 Battery Grip
- 사용 설명서
- Battery Magazine for two LP-E6N batteries
5. 안전수칙
안전한 작동과 장비 손상을 방지하기 위해 다음 예방 조치를 준수해 주십시오.
- Do not expose the battery grip to water or excessive moisture.
- Avoid dropping the grip or subjecting it to strong impacts.
- Use only genuine Canon LP-E6N batteries or approved equivalents.
- Do not attempt to disassemble or modify the battery grip.
- 어린이의 손이 닿지 않는 곳에 보관하세요.
- 사용하지 않을 때는 시원하고 건조한 곳에 보관하세요.
6. 설정 및 설치
6.1. 배터리 설치
- Open the battery magazine by sliding the latch.
- Insert one or two LP-E6N battery packs into the magazine, ensuring correct polarity.
- Close the battery magazine securely.
Figure 1: Canon BG-E21 Battery Grip with the battery magazine extended, showing the slots for LP-E6N batteries.
6.2. Attaching the Battery Grip to the Camera
- 카메라의 전원이 꺼져 있는지 확인하세요.
- Remove the camera's battery compartment cover. Store this cover in the designated slot on the battery grip to prevent loss.
- 배터리 그립의 장착 나사를 카메라 삼각대 소켓에 맞춰 정렬하십시오.
- Insert the battery grip's electrical contacts into the camera's battery compartment.
- Rotate the attachment wheel on the battery grip clockwise until it is securely fastened to the camera. Do not overtighten.
6.3. Removing the Battery Grip
- 카메라의 전원이 꺼져 있는지 확인하세요.
- Rotate the attachment wheel counter-clockwise until the grip is loose.
- Carefully detach the battery grip from the camera.
- Reattach the camera's original battery compartment cover.
7. Operating the Battery Grip
7.1. 전원 켜기 / 끄기
The battery grip features an ON/OFF switch. Set this switch to ON to enable the grip's controls and power supply. Set it to OFF when not in use or when changing batteries.
7.2. Vertical Shooting Controls
The BG-E21 provides duplicate controls for comfortable vertical shooting:
- 셔터 릴리스 버튼: Functions identically to the camera's main shutter button.
- 메인 다이얼: Allows adjustment of camera settings.
- 멀티 컨트롤러: For navigating menus and selecting AF points.
- AF-ON 버튼: 자동 초점을 활성화합니다.
- AE Lock/FE Lock Button (*): Locks exposure or flash exposure.
- Vertical Grip Lock Switch: Prevents accidental operation of the vertical shooting controls. Set to the lock position when not actively using these controls.
8. 유지관리 및 관리
- 청소: Use a soft, dry cloth to clean the exterior of the battery grip. For stubborn dirt, a slightly damp cloth can be used, followed by immediate drying. Do not use organic solvents or strong cleaning agents.
- 콘택트 렌즈: Keep the electrical contacts on both the grip and the camera clean and free of dust or debris. Use a clean, dry cotton swab if necessary.
- 저장: When storing the battery grip for extended periods, remove the batteries. Store the grip in a cool, dry, well-ventilated area, away from direct sunlight and extreme temperatures.
- 배터리 관리 : Follow the battery manufacturer's guidelines for charging and storage of LP-E6N batteries.
9. 문제 해결
- Grip not powering on/camera not recognizing grip:
- 배터리가 올바르게 삽입되고 충전되었는지 확인하세요.
- Check that the battery grip's ON/OFF switch is set to ON.
- Verify that the grip is securely attached to the camera and the electrical contacts are clean.
- 수직 제어 장치가 작동하지 않습니다.
- Check that the Vertical Grip Lock Switch is in the unlocked position.
- Ensure the grip is properly powered on.
- Loose attachment:
- Tighten the attachment wheel clockwise until the grip is firm.
10. 사양
| 모델 번호 | 2130C001 |
| 호환 배터리 | LP-E6N (one or two) |
| 제품 치수 | 3.4 x 5.7 x 4.4인치(8.6 x 14.5 x 11.2cm) |
| 품목 무게 | 12.4 온스(351.5그램) |
| 제조업체 | 캐논 카메라 미국 |
| ASIN | B072KDZLFF |
11. 보증 및 지원
보증 정보 및 기술 지원에 대해서는 캐논 공식 웹사이트를 참조하십시오. website or contact Canon customer service. Keep your purchase receipt as proof of purchase for warranty claims.
공식 Canon 지원: www.usa.canon.com/support
