Intermec PC43T 열전사/직접 감열식 데스크탑 프린터 사용 설명서

1. 서론

This manual provides essential information for the safe and efficient operation of your Intermec PC43T Thermal Transfer/Direct Thermal Desktop Printer. It covers setup, operation, maintenance, and troubleshooting. Please read this manual thoroughly before using the printer and retain it for future reference.

The Intermec PC43T is a versatile 4-inch desktop printer designed for various labeling applications, featuring both thermal transfer and direct thermal printing capabilities, a 203 DPI print resolution, an LCD display for easy navigation, and multiple USB connectivity options.

2. 안전 정보

부상 및 프린터 손상을 방지하기 위해 항상 다음 안전 수칙을 준수하십시오.

• 전원: Use only the power adapter supplied with the printer. Ensure the power outlet is properly grounded.
• 통풍: Do not block ventilation openings. Ensure adequate airflow around the printer to prevent overheating.
• 환경: Operate the printer in a clean, dry environment, away from direct sunlight, excessive heat, or moisture.
• 손질: Avoid dropping or subjecting the printer to strong impacts.
• 유지: Disconnect the power cord before performing any maintenance or cleaning. Do not attempt to service the printer yourself; refer to qualified service personnel.

3. 프린터 구성 요소

Familiarize yourself with the main components of your Intermec PC43T printer:

This image displays the Intermec PC43T desktop label printer. The printer is dark gray with an integrated LCD display on top, showing menu options like 'Programs', 'Setup', 'Tools', and 'Wizards'. A label with a barcode and text 'EDI-DOC' is shown exiting the front of the printer. The printer features a blue button on the right side and several control buttons near the LCD screen.

• LCD 디스플레이: Provides menu navigation and status information.
• 제어 버튼: Used to navigate menus and confirm selections on the LCD display.
• Media Exit Slot: Where printed labels or receipts exit the printer.
• Media Cover Latch: (Blue button on the right side) Releases the top cover to access media and ribbon compartments.
• 전원 포트: Connects the printer to the power adapter.
• USB 포트: Includes USB 2.0 and two USB Host ports for connectivity.

4. 초기 설정

4.1. 풀기

1. 프린터와 모든 액세서리를 포장에서 조심스럽게 꺼내세요.
2. 포장 명세서에 기재된 모든 구성품이 있는지 확인하십시오.
3. Retain the packaging for future transportation or storage.

4.2. 전원 연결하기

1. 전원 코드를 전원 어댑터에 연결합니다.
2. Plug the power adapter into the printer's power port.
3. 전원 코드를 접지된 콘센트에 꽂으세요.

4.3. USB 연결

1. Connect one end of the USB cable to the USB 2.0 port on the printer.
2. USB 케이블의 다른 쪽 끝을 컴퓨터의 사용 가능한 USB 포트에 연결합니다.
3. The printer also features two USB Host ports for connecting peripherals.

4.4. 미디어 로드

The PC43T supports both thermal transfer (requires ribbon) and direct thermal (no ribbon) media. Refer to the specific media loading instructions provided with your media type.

1. Press the blue media cover latch to open the printer's top cover.
2. Place the roll of labels onto the media supply spindle, ensuring the labels feed correctly.
3. Thread the media through the guides and under the print head.
4. If using thermal transfer media, install the ribbon according to the instructions provided with the ribbon.
5. Close the top cover until it latches securely.

5. 사용 설명서

5.1. 전원 켜기 / 끄기

• 전원을 켜려면: Press the power button located on the printer. The LCD display will illuminate.
• 전원을 끄려면: Press and hold the power button until the printer shuts down.

5.2. Using the LCD Display

The LCD display provides access to printer settings and status. Use the control buttons adjacent to the display to navigate:

• 위/아래 화살표: 메뉴 옵션을 스크롤합니다.
• 입력 버튼: 옵션을 선택하거나 설정을 확인하세요.
• 뒤로가기 버튼: 이전 메뉴로 돌아갑니다.

Common menu options include:

• 프로그램: Access pre-loaded printing applications.
• 설정: Configure printer settings such as media type, print darkness, and network settings.
• 도구: Perform calibration, test prints, or view printer information.
• Wizards: Guided setup processes for specific tasks.

5.3. Driver Installation and Printing

Before printing, install the appropriate printer drivers on your computer. Drivers are typically available from the Intermec support website. Once installed, you can print labels from compatible software applications.

1. 프린터의 전원이 켜져 있고 컴퓨터에 연결되어 있는지 확인하세요.
2. Open your label design software or application.
3. Select the Intermec PC43T as your printer.
4. Configure print settings (e.g., label size, orientation) as needed.
5. 인쇄 작업을 시작하세요.

6. 유지관리

Regular maintenance ensures optimal printer performance and extends its lifespan.

6.1. 프린트 헤드 청소

A dirty print head can cause poor print quality. Clean it regularly, especially after changing media or ribbon.

1. 프린터 전원을 끄고 전원 코드를 뽑으세요.
2. 미디어 커버를 엽니다.
3. 보풀 없는 천에 이소프로필 알코올을 묻혀 프린트 헤드 표면을 부드럽게 닦아주세요.
4. 프린트 헤드가 완전히 마를 때까지 기다린 후 덮개를 닫고 전원을 다시 연결하십시오.

6.2. Replacing Supplies

Replace labels and thermal transfer ribbons as they run out. Always use Intermec-approved supplies for best results.

• 라벨: Follow the media loading instructions in Section 4.4.
• Ribbon (Thermal Transfer): Follow the specific instructions provided with your ribbon. Ensure the ribbon is correctly tensioned.

7. 문제 해결

This section addresses common issues you might encounter with your PC43T printer.

8. 사양

Key technical specifications for the Intermec PC43T printer (Model: PC43TB00100201):

• 인쇄 기술: 열전사/감열
• 인쇄 해상도: 203DPI
• 최대 미디어 크기: 4인치
• 표시하다: LCD 디스플레이
• 연결성: USB 2.0, 2 USB Host Ports
• 특별 기능: Tear-Off function, Real Time Clock
• 포함 사항: Latin fonts, US power cord
• 품목 무게: 약 1파운드
• 색상: 검은색

9. 보증 및 지원

For warranty information, please refer to the warranty card included with your product or visit the official Intermec (now Honeywell) website. Technical support and additional resources, including updated drivers and firmware, can be found on the manufacturer's support portal.

If you require service or have questions not covered in this manual, please contact your authorized Intermec dealer or technical support.