소개
This manual provides essential information for the installation, operation, and maintenance of the BFT PHOBOS BT KIT A25 electromechanical operator for swing gates. This kit is designed to automate swing gates weighing up to 400 kg and with a leaf length of up to 2.5 meters. The complete set includes two irreversible 24V electromechanical operators suitable for gates up to 250 kg in weight and 5 meters in length (total for both leaves).
Please read this manual carefully before proceeding with installation or operation to ensure safe and correct use of the product.
안전 정보
WARNING: Improper installation or use can cause serious injury or damage.
- Installation must be performed by qualified personnel in compliance with local regulations and safety standards.
- 유지보수 또는 수리 작업을 하기 전에 전원을 차단하십시오.
- Ensure all electrical connections are properly insulated and grounded.
- 어린이가 문 근처에서 놀거나 제어장치를 작동하도록 허용하지 마십시오.
- 리모컨은 어린이의 손이 닿지 않는 곳에 보관하십시오.
- 시스템의 마모 또는 손상 징후를 정기적으로 점검하십시오.
제품 끝view
The BFT PHOBOS BT KIT A25 includes the following main components:
- Two 24V irreversible electromechanical operators for swing gates.
- Control unit (housed in a protective box).
- Remote controls.
- Safety photocells.
- 경고등.
- Key release mechanism for manual operation.
그림 1: 위에view of the BFT PHOBOS BT KIT A25 components. This image displays the two linear gate operators, the central control unit within its housing, two remote controls, a pair of safety photocells, a warning light, and a manual key release mechanism. These are the primary elements included in the gate automation kit.
설정 및 설치
Installation of the BFT PHOBOS BT KIT A25 requires careful attention to mechanical mounting and electrical wiring. It is highly recommended that installation be carried out by a professional installer.
기계 설치
- Mounting the Operators: Securely attach the two electromechanical operators to the gate posts and gate leaves using appropriate brackets and fasteners. Ensure correct alignment for smooth gate movement.
- 광전지 배치: Install the safety photocells at a suitable height and position to detect obstacles in the gate's path. Ensure they are aligned correctly.
- 경고등: Mount the warning light in a visible location to indicate gate movement.
전기 연결
- 전원 공급 장치: Connect the main power supply to the control unit, ensuring it is a 24V supply as specified.
- 모터 연결: Connect the motor cables from each operator to the designated terminals on the control unit.
- 액세서리 연결: Wire the photocells, warning light, and any other accessories (e.g., key switch, intercom) to the control unit according to the wiring diagram provided in the detailed product manual (not included here).
- 접지: Ensure all components are properly grounded to prevent electrical hazards.
초기 프로그래밍
After mechanical and electrical installation, the control unit will require initial programming to set gate travel limits, operating speeds, and safety features. Refer to the specific programming instructions provided with the control unit for detailed steps.
작동 지침
원격 제어 작동
The gate can be operated using the provided remote controls. Pressing a programmed button on the remote will initiate the gate's movement (open/close cycle). A second press typically stops the gate, and a third press reverses its direction.
수동 오버라이드
In case of power failure or system malfunction, the gate can be operated manually using the key release mechanism. Insert the key into the lock on the operator and turn it to disengage the motor, allowing the gate to be moved by hand.
CAUTION: Always ensure the gate area is clear before operating, especially during manual override.
유지
Regular maintenance ensures the longevity and safe operation of your BFT gate opener system.
- 월별 검사: Check the gate's movement for any unusual noises or resistance. Ensure all mounting bolts are tight.
- Photocell Cleaning: Keep the photocell lenses clean and free from dirt, dust, or spiderwebs to ensure proper function.
- 매끄럽게 하기: Periodically lubricate moving parts of the gate hinges and operator mechanism as recommended by the detailed product manual.
- 전기 점검: Annually, have a qualified technician inspect electrical connections and system performance.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 문이 움직이지 않습니다. | No power; remote control battery dead; safety photocells obstructed. | Check power supply; replace remote battery; clear photocell path. |
| 문이 예상치 못하게 멈춥니다. | Obstruction detected by safety features; motor overheating. | Remove obstruction; allow motor to cool down. |
| 리모컨이 작동하지 않습니다. | Battery low/dead; remote out of range; remote not programmed. | Replace battery; move closer to gate; re-program remote. |
For complex issues or if the problem persists, contact a qualified BFT service technician.
명세서
| 기인하다 | 세부 사항 |
|---|---|
| 상표 | 비피에이치피(BFT) |
| 모델 번호 | R935306 00004 |
| 제품 치수 | 10 x 30 x 30 cm (approximate for main components) |
| 품목 무게 | 11kg (총 구성품 무게) |
| 전원 공급 장치 | 24볼트 |
| 게이트 중량 용량 | Up to 400 kg (total for swing gates) |
| Gate Length Capacity | Up to 2.5 m per leaf (5 m total for two leaves) |
| 색상 | Nd (No specific color indicated, likely neutral/standard) |
| 첫 번째 가능한 날짜 | 12년 2016월 XNUMX일 |
보증 및 지원
For warranty information, please refer to the documentation provided with your purchase or contact BFT customer service directly. BFT products typically come with a manufacturer's warranty covering defects in materials and workmanship.
For technical support, spare parts, or professional assistance with installation and maintenance, please contact your authorized BFT dealer or visit the official BFT web연락처 정보 사이트.
BFT 공식 Web대지: www.bftautomation.com