1. 서론
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your OSRAM Endura Style Lantern Bowl LED Outdoor Wall Light with Sensor. This energy-efficient LED luminaire is designed for outdoor use, offering bright and functional illumination with an integrated motion and daylight sensor.
Its robust die-cast aluminum housing and IP44 protection rating ensure durability in various outdoor environments. The programmable sensor allows for customized detection of presence and daylight, with an adjustable hold time from 2 seconds to 5 minutes. It is ideal for illuminating facades, gardens, balconies, pathways, and other outdoor areas.
Figure 1: OSRAM Endura Style Lantern Bowl LED Outdoor Wall Light with Sensor.
그림 2: 예ample installation of the OSRAM Endura Style Lantern Bowl LED Outdoor Wall Light near a front door.
2. 안전 정보
- 전기 안전: Installation must be performed by a qualified electrician or competent person in accordance with local wiring regulations. Always switch off the main power supply before installation, maintenance, or repair.
- 야외 사용: 본 제품은 IP44 등급으로, 1mm 이상의 고체 이물질과 모든 방향에서 튀는 물로부터 보호됩니다. 실외 사용에 적합하지만 물에 담그지 마십시오.
- 교체 불가능한 LED: The LED light source in this luminaire is not replaceable. When the light source reaches its end of life, the entire luminaire must be replaced.
- 설치: Ensure the mounting surface is structurally sound and can support the weight of the fixture (approximately 1.48 kg). Use appropriate screws and wall plugs for the mounting surface.
- 온도: Do not install near heat sources or in areas with extreme temperatures outside the product's operating range.
- 청소: 청소하기 전에 전원을 분리하세요. 부드러운 천을 사용하세요.amp 천. 연마성 세척제나 용매를 사용하지 마십시오.
3. 패키지 내용
설치를 진행하기 전에 모든 구성품이 있는지, 손상되지 않았는지 확인하십시오.
- OSRAM Endura Style Lantern Bowl LED Outdoor Wall Light with Sensor
- 장착 액세서리(나사, 벽면 플러그)
- 연결 액세서리
- 사용 설명서
Figure 3: Product packaging, showing the OSRAM Endura Style Lantern Bowl LED Outdoor Wall Light.
4. 사양
| 상표 | 오스람 |
| 모델 번호 | 4058075032422 |
| 제조업체 | 레드밴스 |
| 치수(길이 x 너비 x 높이) | 26.7 x 21 x 19cm |
| 무게 | 1.48kg |
| 재료 | 알류미늄 |
| 색상 | Warm White (Light output) |
| IP 등급 | IP44 |
| 권tage | 240 볼트 |
| 전력 소비 | 7 와트 |
| 광속 | 400 lm |
| 연색지수(CRI) | 80 |
| 평균 수명 | 30,000시간 |
| 특별 기능 | Non-dimmable, Integrated Motion Sensor |
| 에너지 효율 등급 | 아++ |
Figure 4: Energy efficiency label indicating A++ rating and non-replaceable LED lamps.
5. 설치 지침
중요한: Ensure the main power supply is switched off at the fuse box before commencing installation. If you are unsure about electrical installation, consult a qualified electrician.
- 준비: Unpack the luminaire and check for any damage. Ensure all components listed in the "Package Contents" section are present.
- 위치를 선택하십시오 : Select a suitable outdoor wall location for mounting. Ensure the surface is flat and robust enough to support the fixture. Consider the desired coverage area for the motion sensor.
- 드릴링 지점 표시: Hold the mounting base of the luminaire against the wall at the desired installation height. Mark the positions for the two mounting holes. Note: A drilling template is not provided, so careful measurement is essential.
- 드릴 구멍: Drill holes at the marked positions using an appropriate drill bit for your wall type. Insert the provided wall plugs into the drilled holes.
- 마운트 베이스 플레이트: Secure the mounting base plate to the wall using the provided screws. Ensure it is firmly attached.
- 전기 연결:
- Connect the live (L) wire to the terminal marked 'L'.
- Connect the neutral (N) wire to the terminal marked 'N'.
- Connect the earth (E) wire to the terminal marked 'E' (if applicable).
- Attach Luminaire Body: Carefully align the main luminaire body with the mounting base plate. Secure it using the small screws and the provided Allen key. Ensure a tight seal to prevent water ingress, as improper sealing can lead to product failure.
- 복원력 : Once installation is complete and all connections are secure, restore power at the main fuse box.
Figure 5: Close-up of the luminaire, highlighting the sensor and mounting area.
6. 사용 설명서
Your OSRAM Endura Style Lantern Bowl LED Outdoor Wall Light features an integrated programmable motion and daylight sensor for automatic operation.
센서 조정
The sensor typically has two adjustable settings, often controlled by small dials or switches located on the sensor unit:
- Time (Hold Time): This setting determines how long the light remains on after motion is detected and no further motion is sensed. The adjustable range is typically from 2 seconds to 5 minutes. Turn the dial clockwise to increase the hold time, and counter-clockwise to decrease it.
- LUX (Daylight Sensor Sensitivity): This setting controls the ambient light level at which the sensor becomes active.
- Set to a low LUX value (e.g., "moon" symbol) for the light to activate only in very dark conditions (dusk to dawn operation).
- Set to a high LUX value (e.g., "sun" symbol) for the light to activate in brighter conditions, including during the day.
추천: Start with both the Time and LUX settings at their halfway point and adjust as needed based on your specific requirements and environment. Test the sensor's functionality after each adjustment.
7. 유지관리
- 청소: To clean the luminaire, first disconnect the power supply. Use a soft, dry, or slightly damp 천을 사용하십시오. 독한 화학 물질, 연마성 세척제 또는 용제를 사용하지 마십시오. 이러한 것들은 마감재나 전기 부품을 손상시킬 수 있습니다.
- 점검: Periodically inspect the luminaire for any signs of damage, loose connections, or wear. Ensure the mounting screws are tight and the seals are intact, especially after severe weather conditions.
- LED 광원 : The integrated LED light source is designed for a long lifespan (30,000 hours) and is not user-replaceable. If the LED fails, the entire fixture must be replaced.
8. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 조명이 켜지지 않습니다. |
|
|
| 표시등이 계속 켜져 있습니다. |
|
|
| 낮에는 불이 켜집니다. |
|
|
| Water ingress / Unit failure after rain. |
|
|
9. 보증 및 지원
This OSRAM Endura Style luminaire comes with a 5년 보증, reflecting its quality and durability. The average lifespan of the integrated LED is 30,000 hours.
Please note that spare parts availability information is not provided, and the LED light source is not replaceable. In case of a defect within the warranty period, please contact your retailer or OSRAM customer support with your proof of purchase.
For further assistance or technical inquiries, please visit the official OSRAM web사이트 또는 고객 서비스 부서에 문의하십시오.
