1. 서론
The Duronic DMUSB5X1 is a desk-mounted monitor arm designed to optimize your workspace. It features a gas spring mechanism for smooth, effortless adjustments, allowing you to position your monitor for optimal viewing comfort. This model also integrates a USB hub and audio ports for convenient connectivity directly at your desk.
This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your Duronic DMUSB5X1 monitor arm.
2. 안전 지침
- 조립 및 사용 전에 모든 지침을 주의 깊게 읽으십시오.
- Ensure your desk surface is strong enough to support the monitor arm and attached monitor(s).
- 팔당 최대 하중 8kg(17.6lbs)을 초과하지 마십시오.
- Ensure all screws and connections are securely tightened before use. Periodically check for tightness.
- 어린이와 애완동물을 집회 장소에 가까이 두지 마십시오.
- Use only the provided hardware. If any parts are missing or damaged, contact Duronic customer support.
- Adjust the gas spring tension carefully to match your monitor's weight. Improper tension can cause the monitor to drop or spring up unexpectedly.
3. 패키지 내용
조립을 시작하기 전에 모든 구성 요소가 있는지 확인하세요.
- Monitor Arm Assembly (Gas Spring Arm, Pole)
- 데스크 Clamp 베이스
- VESA 마운팅 플레이트
- USB and Audio Extension Cables
- 장착 하드웨어(다양한 나사, 와셔, 스페이서)
- Allen Keys for assembly and adjustment
4. 설정 및 설치
Follow these steps to install your Duronic DMUSB5X1 monitor arm:
- 책상 부착amp: 책상 배치 clamp base on your desk edge. Ensure the desk clamp is securely fastened to a stable surface. The clamp can accommodate desk thicknesses up to 68mm. Tighten the clamp 단단히 조이십시오.
그림 4.1: 책상 clamp 설치.
- Assemble Arm to Pole: Insert the monitor arm onto the pole of the desk clamp. Secure it with the provided screws and Allen key.
- 모니터에 VESA 플레이트 부착: Carefully place your monitor face down on a soft, clean surface. Attach the VESA mounting plate to the back of your monitor using the appropriate screws and spacers (if needed). The arm supports VESA 75x75mm and 100x100mm patterns.
Figure 4.2: VESA plate and arm dimensions.
- 모니터를 Arm에 장착: Slide the monitor (with VESA plate attached) onto the arm's VESA head. Secure it with the locking mechanism or screws as per the specific design.
- USB 케이블과 오디오 케이블을 연결하세요: Connect the integrated USB and audio extension cables from the monitor arm base to the corresponding ports on your computer. This enables the convenient USB and audio ports on the arm's base.
Figure 4.3: Integrated USB and audio ports.
- 가스 스프링 장력 조절: The gas spring comes pre-tensioned. You may need to adjust it to match your monitor's weight. Use the provided Allen key to turn the adjustment screw on the arm. Turn clockwise to increase tension for heavier monitors, and counter-clockwise to decrease tension for lighter monitors. Adjust until the monitor stays in position when moved.
5. 운영 및 조정
The Duronic DMUSB5X1 offers a wide range of adjustments for optimal viewing:
- 높이 조정: The gas spring arm allows for smooth vertical movement. Gently push or pull the monitor to the desired height.
- 경사: The VESA head allows tilting the monitor -90° (downwards) to +85° (upwards) to reduce glare and improve view각도를 나타냅니다.
- 받침: The arm can swivel 180° left or right at the pole and at the arm joints, allowing you to share your screen or adjust its position.
- 회전: The VESA plate allows for 360° rotation, enabling you to switch between landscape and portrait orientations.
Figure 5.1: Monitor arm adjustment ranges.
- Integrated USB and Audio Ports: Use the two USB 2.0 ports for connecting peripherals like keyboards, mice, or USB drives. The headphone and microphone jacks provide convenient access for audio devices.
6. 유지관리
- 청소: 모니터 암을 부드러운 천으로 닦으세요.amp 천으로 닦으세요. 마감재를 손상시킬 수 있는 연마성 세제나 용제는 사용하지 마세요.
- 정기 점검: 모든 나사와 연결부가 단단히 조여져 있는지 정기적으로 점검하십시오. 필요한 경우 다시 조이십시오.
- 가스 스프링 조정: If your monitor's weight changes, or if the arm no longer holds its position correctly, re-adjust the gas spring tension as described in the setup section.
7. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Monitor does not stay in desired position (sags or springs up). | Incorrect gas spring tension. | Adjust the gas spring tension using the provided Allen key. Turn clockwise for heavier monitors, counter-clockwise for lighter monitors. |
| Monitor cannot be attached to the VESA plate. | Monitor VESA pattern is not compatible (not 75x75mm or 100x100mm). | Verify your monitor's VESA compatibility. An adapter may be required for non-standard patterns. |
| USB or audio ports on the arm base are not working. | Extension cables are not properly connected to the computer. | Ensure the USB and audio extension cables from the monitor arm base are securely plugged into the corresponding ports on your computer. |
| Arm feels loose or unstable. | 데스크 CLamp is not tightened sufficiently or desk surface is unstable. | 책상 고정 장치를 다시 조여주세요amp. Ensure the desk surface is stable and within the recommended thickness. |
8. 사양
- 모델: DMUSB5X1
- 상표: 듀로닉
- 재료: 알류미늄
- 모니터 크기 호환성: 15-27인치(38-68cm)
- 중량 용량: 팔당 최대 8kg(17.6lbs)
- VESA 호환성: 75x75mm, 100x100mm
- 조정 사항:
- 기울기 : -90 ° ~ + 85 °
- 회전: 180°
- 회전: 360°
- 데스크 Clamp 두께: 최대 68mm
- 통합 포트: 2 x USB 2.0, 1 x Headphone Jack, 1 x Microphone Jack
9. 보증 및 지원
보증 정보: For detailed warranty terms and conditions, please refer to the manufacturer's official web사이트 또는 제품 포장에 포함된 보증 카드를 참조하세요.
고객 지원: If you encounter any issues or have questions regarding your Duronic DMUSB5X1 monitor arm, please visit the official Duronic website for support resources, FAQs, and contact information for their customer service team.
