소개
Thank you for choosing the Nokta Impact Pro Metal Detector. This advanced device is engineered for superior performance in various terrains, offering multiple operating frequencies and advanced discrimination capabilities. This manual provides essential information for the proper setup, operation, and maintenance of your metal detector to ensure optimal performance and longevity.
Figure 1: The Nokta Impact Pro Metal Detector fully assembled.
안전 정보
Please read and understand all safety warnings before operating the device. Failure to follow these instructions may result in injury or damage to the detector.
- Do not operate the detector near live electrical lines or underground cables.
- Avoid using the detector in thunderstorms or severe weather conditions.
- 개인 소유지에서 금속 탐지기를 사용하기 전에는 반드시 허가를 받으세요.
- 땅을 파서 지하 시설물이나 역사 유물을 손상시키지 않도록 주의하십시오.
- 탐지기를 강한 자기장으로부터 멀리 두십시오.
- 배터리가 올바르게 삽입되었는지 확인하고 책임감 있게 폐기하십시오.
패키지 내용
패키지에 모든 구성품이 들어 있는지 확인하세요.
- Impact Pro Metal Detector Main Unit
- Waterproof DD Search Coil (28 x 18 cm / 11" x 7")
- Search Coil Cover
- 헤드폰
- AA 알카라인 배터리 4 개
- USB 케이블
- 사용자 설명서
- 운반 가방
- 서다
Figure 2: All components included with the Nokta Impact Pro Metal Detector.
조립 및 설정
Follow these steps to assemble your Nokta Impact Pro Metal Detector:
- 검색 코일을 부착하세요: Securely attach the search coil to the lower rod using the provided bolt and nut. Ensure the coil cable is wrapped snugly around the lower and middle rods.
- Connect the Rods: Connect the lower rod to the middle rod, and then connect the middle rod to the upper rod (main unit). Adjust the length to a comfortable position for your height.
- 배터리 삽입: Open the battery compartment on the main unit and insert 4 AA alkaline batteries, ensuring correct polarity. Close the compartment securely.
- 검색 코일 케이블을 연결하십시오: Plug the search coil cable connector into the corresponding port on the main unit. Ensure it is firmly seated.
- 팔걸이 조절하기: Adjust the armrest for a comfortable fit, allowing for easy swinging of the detector.
Figure 3: The adjustable shaft of the detector for ergonomic use.
작동 지침
The Nokta Impact Pro offers a variety of settings and modes to optimize your detecting experience.
전원 켜기/끄기
Press and hold the power button located on the control box to turn the detector on or off.
디스플레이 오버view
The LCD display provides crucial information about target identification, settings, and battery status.
그림 4: 상세 view of the control display showing various settings and target ID.
Figure 5: The display indicating a target ID, with examples of found coins.
작동 주파수
The Impact Pro operates at multiple frequencies to suit different detecting conditions and target types:
- 5kHz: Ideal for larger, deeper targets and highly mineralized ground.
- 14kHz: A versatile general-purpose frequency, good for coins and relics.
- 20kHz: Excellent for small, low-conductivity targets like gold nuggets and fine jewelry.
그라운드 밸런스
Ground balance is crucial for stable operation and accurate target identification, especially in mineralized soils. The Impact Pro offers three options:
- 오토매틱: The detector automatically adjusts to the ground conditions.
- 수동 : Allows the user to fine-tune the ground balance for specific conditions.
- 추적: The detector continuously tracks and adjusts to changes in ground mineralization.
Iron Audio (Fe Volume)
This setting allows you to adjust or completely turn off the volume of the low iron tone, helping to filter out unwanted ferrous signals while still providing an indication of iron presence.
오디오 톤
You can change the frequency of target and threshold tones (150Hz - 700Hz) to customize your audio experience and better distinguish between different target types.
Figure 6: The detector positioned on a rocky beach, suitable for various terrains.
Figure 7: The detector in a grassy field, demonstrating its versatility across different environments.
유지
Proper maintenance ensures the longevity and performance of your detector.
- 청소: Wipe down the detector with a damp cloth after each use. Do not use abrasive cleaners or solvents. The search coil is waterproof, but the main control box is not.
- 배터리 관리 : Remove batteries if the detector will not be used for an extended period to prevent leakage. Use high-quality alkaline or rechargeable batteries.
- 저장: 검출기를 서늘하고 건조한 곳에 보관하고 직사광선과 극한 온도 변화를 피하십시오.
- 코일 보호: Always use the search coil cover to protect the coil from scratches and impacts.
문제 해결
If you encounter issues with your detector, refer to the table below for common problems and solutions.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 감지기가 켜지지 않습니다 | 배터리가 없거나 잘못 삽입된 배터리 | 배터리를 새 배터리로 교체하십시오. 극성이 올바른지 확인하십시오. |
| 불규칙적인 신호 또는 오탐지 | Improper ground balance; electromagnetic interference; highly mineralized soil | Perform ground balance; move away from power lines or other electronics; adjust sensitivity. |
| No target audio | Headphones not connected; volume too low; speaker muted | Check headphone connection; increase volume; ensure speaker is not muted. |
| Poor depth detection | Incorrect frequency for target size; high mineralization; low sensitivity setting | Try a lower frequency (5 kHz); re-ground balance; increase sensitivity if stable. |
명세서
| 특징 | 세부 사항 |
|---|---|
| 작동 주파수 | 5kHz, 14kHz, 20kHz |
| 무게 | 4 lbs (1.8 Kgs) including search coil and batteries |
| 그라운드 밸런스 | Automatic, Manual, Tracking |
| Iron Audio (Fe Volume) | Adjustable or Off |
| 오디오 톤 | 조절 가능 (150Hz - 700Hz) |
| 전원 | 4 x AA 배터리(포함) |
| 제품 치수 | 21인치 길이 x 5인치 너비 x 10인치 높이 |
| 확장된 길이 | 56 인치 |
| 국제 보호 등급 | IP54 |
| 프로그램 수 | 12 |
보증 및 지원
Nokta provides a limited warranty for the Impact Pro Metal Detector against defects in materials and workmanship under normal use. Please refer to the warranty card included in your package for specific terms and conditions.
For technical support, service, or warranty claims, please contact Nokta customer service through their official web사이트 또는 공인 유통업체에 문의하십시오. 구매 증빙 자료로 구매 영수증을 보관하십시오.
온라인 리소스: For additional information, FAQs, and software updates, visit the official Nokta web대지: www.noktaDetectors.com
