1. 제품 오버view
The Valore 7 shower panel is designed for retrofit installation into existing shower systems that include a cold and hot faucet. It connects to an existing shower head spout. The panel body is constructed from durable 304 stainless steel, offering a modern aesthetic for bathroom upgrades.
This shower panel features a 3-way shower spray mode system, allowing for versatile water delivery options. It includes a brass shower wand with a brass shower cradle for handheld use.
Image 1.1: Valore 7 Shower Panel installed in a modern bathroom setting.
2. 안전 정보
- 설치를 시작하기 전에 모든 물 공급 라인이 차단되어 있는지 확인하세요.
- 설치하는 동안 안전 안경, 장갑 등 적절한 개인 보호 장비를 착용하세요.
- 설치 과정의 어떤 부분이든 확실하지 않은 경우 자격을 갖춘 배관공에게 문의하세요.
- Do not use abrasive cleaners or harsh chemicals on the shower panel's surface, as this may damage the finish.
3. 패키지 내용
설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.
- Shower Panel Unit
- 샤워헤드
- Shower Wand (Handheld Shower)
- Shower Cradle for Handheld Shower
- 장착 하드웨어
- Flexible Hoses for Water Connection
- 설치 설명서
4. 사양
| 특징 | 사양 |
|---|---|
| 상표 | 발로어 |
| 모델 번호 | 32c8f765-6d09-4293-9210-40320453c0bb |
| 색상 | 브러시드 스테인리스 스틸 |
| 재료 | 황동, 스테인레스 |
| 마무리 유형 | 닦았다 |
| 핸들 수 | 3 |
| 장착 유형 | 벽걸이형 |
| 품목 무게 | 14.02파운드 |
| 인증 | UPC/c-UPC certified |
5. 치수
자세한 제품 치수는 아래 그림을 참조하십시오.
Image 5.1: Valore 7 Shower Panel Dimensions Diagram. All measurements are approximate.
6. 설치 지침
The Valore 7 shower panel is designed for easy retrofit installation. It connects to your existing shower head spout and hot/cold water lines.
6.1 사전 설치
- 물 공급을 차단하세요: Locate and turn off the main water supply to your bathroom or entire home.
- Remove Existing Fixtures: Carefully remove your current shower head and any other fixtures that will be replaced by the shower panel.
- Inspect Plumbing: Ensure your existing hot and cold water lines are accessible and in good condition. This panel is designed for systems with existing hot and cold faucets.
- Water-Saving Regulator: If your water pressure is naturally low, consider not installing any water-saving regulator that may be included with the panel, as it can further reduce flow. If you use the hang-on to the shower pipe method, access to the regulator may be limited after installation.
6.2 패널 장착
- 위치: Hold the shower panel against the wall in the desired position. Mark the locations for mounting brackets. Ensure the panel is level.
- 드릴 구멍: 표시된 위치에 드릴로 파일럿 구멍을 뚫으세요. 필요한 경우 벽 앵커를 삽입하세요.
- 안전한 브라켓: 제공된 나사를 사용하여 벽에 장착 브래킷을 부착합니다.
- 패널 부착: The unit may include double-sided tape for securing it to the wall. Once applied, repositioning is difficult without replacing the tape. Carefully align and press the panel onto the brackets and tape.
6.3 수도관 연결
- 호스를 연결하십시오: Attach the flexible hot and cold water supply hoses from the shower panel to your existing hot and cold water outlets. Ensure all connections are tight to prevent leaks.
- 휴대용 샤워기: Connect the handheld shower hose to its designated outlet on the panel.
- 물을 켜세요: Slowly turn the main water supply back on and check for any leaks. Tighten connections as needed.
- Seal Edges (Optional but Recommended): Apply a bead of clear silicone caulk along the sides of the shower panel where it meets the tile to create a seal and prevent water intrusion.
Note: This shower panel does not include a temperature/volume control valve. Your existing shower valve will control water temperature and flow.
7. 사용 설명서
The Valore 7 shower panel features a 3-way diverter to control water flow to different functions.
7.1 물 흐름 제어
Use your existing shower's hot and cold water handles to adjust the desired water temperature and overall flow rate.
7.2 Selecting Spray Modes
The panel has a control knob or lever to switch between the three spray modes:
- 레인 샤워: Provides a wide, gentle rainfall-like spray from the overhead shower head.
- 바디젯: Delivers targeted streams of water from the integrated body massage jets.
- 휴대용 샤워기: Directs water flow to the brass shower wand for focused rinsing or cleaning.
Image 7.1: Valore 7 Shower Panel demonstrating the rain shower function.
Image 7.2: Valore 7 Shower Panel demonstrating the body jet function.
Rotate or move the diverter control to select your desired spray function. Only one function can be active at a time.
8. 유지관리
8.1 청소
- 부드러운 천과 순한 비누 또는 비연마성 스테인리스 스틸 세척제를 사용하여 스테인리스 스틸 표면을 정기적으로 청소하세요.
- Avoid using abrasive sponges, scouring pads, or harsh chemical cleaners, as these can scratch or damage the finish.
- For hard water spots, use a solution of white vinegar and water, then rinse thoroughly.
- Periodically clean the nozzles of the shower head and body jets to remove mineral buildup. You can often do this by gently rubbing the rubber nozzles.
8.2 일반 관리
- Ensure all connections remain tight to prevent leaks.
- If any part becomes loose, gently tighten it. Do not overtighten.
9. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 낮은 수압 | Water-saving regulator installed; mineral buildup in nozzles; low household water pressure. | Check if a water-saving regulator is installed and consider removing it if pressure is consistently low. Clean shower head and body jet nozzles. Consult a plumber if household pressure is generally low. |
| 연결부 누수 | 연결 부위가 헐거워졌거나 와셔/가스켓이 마모되었을 수 있습니다. | Ensure all hose connections are securely tightened. Check and replace any damaged washers or gaskets. |
| 전환 스위치가 기능을 전환하지 못함 | 미네랄 축적; 내부 메커니즘 문제. | Flush the system by running water through all functions. If the issue persists, contact customer support. |
10. 보증 및 지원
For warranty information or technical support, please refer to the documentation provided with your purchase or contact Valore customer service. Keep your proof of purchase for warranty claims.
