소개
This manual provides essential information for the safe and effective operation of your Dibeisi Q1536 Stage/Concert Loudspeaker. Please read this manual thoroughly before using the product and retain it for future reference.
그림 1: 전면 view of the Dibeisi Q1536 Stage/Concert Loudspeaker, showcasing its robust black finish and protective metal grille over the woofer and tweeters.
안전 지침
- Ensure the loudspeaker is placed on a stable, level surface or securely mounted on a compatible stand using the integrated stand opening.
- Do not expose the loudspeaker to water, moisture, or extreme temperatures.
- 과열을 방지하려면 환기구를 막지 마십시오.
- Do not attempt to open or service the loudspeaker yourself. Refer all servicing to qualified personnel.
- 지정된 케이블과 커넥터만 사용하십시오.
설정
짐 풀기
Carefully remove the loudspeaker from its packaging. Inspect for any signs of damage during transit. Retain the packaging for future transport or storage.
놓기
The Dibeisi Q1536 is designed for floor mounting or stand mounting. When using a stand, ensure it is rated for the loudspeaker's weight and is stable. Position the loudspeaker to optimize sound dispersion for your specific environment.
사이
The loudspeaker features 6.3 mm jack and 2x banana connectors for audio input. Ensure all connections are secure before powering on your audio system.
- 오디오 소스를 연결합니다(예: amplifier, mixer) to the loudspeaker's input terminals using appropriate cables.
- 확인하십시오 amplifier's power is off before making any connections.
- Match the impedance of the loudspeaker (8 Ohm) with your amplifier's output impedance for optimal performance and safety.
작동 지침
전원 켜기
Once all connections are made, power on your audio source (e.g., amplifier) first, then gradually increase the volume to the desired level. Avoid sudden high volume inputs.
볼륨 조절
Adjust the volume from your audio source. Do not exceed the loudspeaker's maximum power handling capacity (700 W peak, 300 W RMS) to prevent damage.
전원 끄기
Before powering off your audio source, reduce the volume to minimum. This prevents sudden pops or thumps that could damage the loudspeaker.
유지
- 청소: Use a soft, dry cloth to clean the exterior of the loudspeaker. Do not use liquid cleaners or abrasive materials.
- 저장: If storing the loudspeaker for an extended period, keep it in a dry, cool place, ideally in its original packaging to protect it from dust and physical damage.
- 점검: Periodically check cables and connectors for wear or damage. Replace any damaged components immediately.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 소리가 나지 않습니다 |
|
|
| 왜곡된 소리 |
|
|
| 간헐적인 소리 |
|
|
명세서
| 특징 | 세부 사항 |
|---|---|
| 모델 | Q1536 |
| 상표 | Dibeisi |
| 우퍼 | 15인치 |
| 트위터 | 2x (3.7 x 6.5 inches) |
| 우퍼 자석 | 50 온스 |
| 최대 전력 | 700와트 |
| RMS 전원 | 300와트 |
| 임피던스 | 8옴 |
| 감광도 | 92dB / W / m |
| 주파수 응답 | 42Hz - 20kHz |
| 커넥터 | 6.3 mm jack, 2x banana |
| 치수(높이 x 너비 x 깊이) | 645 x 475 x 400mm |
| 색상 | 검은색 |
| 마무리 유형 | 매트 |
| 장착 유형 | 플로어 마운트 |
보증 및 지원
For warranty information and technical support, please refer to the documentation provided at the time of purchase or contact Dibeisi customer service. Keep your proof of purchase for warranty claims.
For further assistance, please visit the official Dibeisi web사이트를 방문하거나 현지 유통업체에 문의하세요.
