1. 서론
This manual provides essential instructions for the installation, operation, and maintenance of your Hikvision DS-7732NI-I4/16P-12TB Network Video Recorder (NVR). This NVR is a 32-channel device supporting H.264 and H.265 video compression, resolutions up to 12MP, and features an integrated 16-port Power over Ethernet (PoE) switch. It includes 4 SATA interfaces for storage, with 12TB of pre-installed capacity, and HDMI output for local display.
Please read this manual thoroughly before operating the device and retain it for future reference. Ensure all safety precautions are observed during installation and operation.
안전 예방 조치
- 이 장치에 지정된 전원 어댑터만 사용하세요.
- 과열을 방지하려면 적절한 환기를 유지하세요.
- 장치를 액체나 극한의 온도에 노출시키지 마십시오.
- 장치를 분해하거나 개조하지 마십시오. 모든 정비는 자격을 갖춘 기술자에게 맡기십시오.
2. 설정
2.1 풀기 및 검사
Carefully unpack the NVR and check the contents against the packing list. Inspect the device for any signs of damage during transit. If any items are missing or damaged, contact your supplier immediately.
2.2 물리적 설치
The DS-7732NI-I4/16P-12TB NVR is designed for rack-mounting or desktop placement. Ensure the installation location is stable, well-ventilated, and free from excessive dust or moisture.
전원 연결
- Connect the provided power cable to the NVR's power input and then to a grounded power outlet.
네트워크 연결
- NVR의 LAN 포트에서 네트워크 라우터나 스위치로 이더넷 케이블을 연결합니다.
디스플레이 연결
- Connect an HDMI cable from the NVR's HDMI output port to a monitor or TV.
Connecting Cameras (PoE)
- Connect IP cameras directly to the NVR's 16 PoE ports using Ethernet cables. The NVR will provide power and data connectivity.
Figure 1: Rear panel connections of the Hikvision DS-7732NI-I4/16P-12TB NVR, illustrating the power input, LAN port, HDMI output, and the 16 PoE ports for camera connections.
Hard Drive Installation (if applicable)
The NVR comes with 12TB pre-installed. If additional drives are needed or replacement is required, follow these steps:
- NVR의 전원을 끄고 모든 케이블을 분리하십시오.
- Remove the NVR cover screws and slide off the cover.
- Mount the hard drive(s) into the drive bays using the provided screws.
- Connect the SATA data and power cables to the hard drive(s) and the NVR motherboard.
- Replace the cover and secure the screws.
2.3 초기 구성
Powering On and First-Time Wizard
- After connecting all necessary cables, power on the NVR.
- The NVR will boot up and display a first-time setup wizard on the connected monitor.
- Follow the on-screen prompts to set up a strong administrator password, configure network settings (DHCP or static IP), and set the date and time.
IP 카메라 추가
- The NVR will typically auto-detect Hikvision cameras connected to its PoE ports.
- For manual addition or third-party cameras, navigate to Configuration > IP Camera > Add.
- Enter the camera's IP address, protocol, port, username, and password.
3. 운영
3.1 사용자 인터페이스 탐색
The NVR can be accessed via a local monitor, web browser, or client software (e.g., iVMS-4200). The local interface is navigated using a mouse.
메인 메뉴 오버view
- 살다 View: Displays real-time camera feeds.
- 재생: Accesses recorded footage.
- 구성: System settings, camera management, recording schedules.
- 이벤트: Alarm and event management.
- 일시 휴업: Safely powers off or restarts the NVR.
3.2 라이브 View
라이브에서 View screen, you can monitor all connected cameras. Double-click a camera feed to view it in full screen. Use the layout options to display multiple cameras simultaneously (e.g., 4, 9, 16, 32 channels).
Figure 2: The Live View interface of the NVR, displaying multiple camera streams in a grid layout, with options for channel selection and layout customization.
3.3 녹음
To configure recording settings, navigate to Configuration > Record > Schedule.
- 연속 녹화 : 지속적으로 기록합니다.
- 모션 감지 녹화: 움직임이 감지될 때만 녹화합니다.
- 알람 녹음: 알람 이벤트가 발생할 때 기록합니다.
- 수동 녹음: Click the record icon in Live View to start/stop recording manually.
3.4 재생
기록된 foo에 접근하려면tage, 가다 재생 메인메뉴에서.
- Select the desired camera(s) and date.
- Use the timeline to navigate through recorded events. Different colors on the timeline indicate different recording types (e.g., continuous, motion).
- 재생 컨트롤(재생, 일시 정지, 빨리 감기, 되감기)을 사용하여 다시 재생하세요.view 푸tage.
- foo를 내보내려면tage, select the desired segment and click the 클립 or 내보내다 단추.
3.5 알람 관리
Configure alarm events and responses via Configuration > Event.
- 동작 감지: Define detection areas and sensitivity for each camera.
- 비디오 Tamp어링: Detects if a camera's view 방해를 받거나 변경되었습니다.
- Line Crossing/Intrusion Detection: Set up virtual lines or areas to trigger alarms.
- 경보 조치: Configure actions such as recording, sending email notifications, triggering alarm outputs, or sounding a buzzer.
3.6 시스템 설정
Access various system settings via Configuration > System.
- 일반적인: Date and time, language.
- 사용자 관리: Create, modify, or delete user accounts and assign permissions.
- 저장: View HDD status, format drives, configure overwrite settings.
- 회로망: Adjust IP address, DNS, port settings.
4. 유지관리
4.1 펌웨어 업데이트
Regularly check for firmware updates on the official Hikvision website. Firmware updates can provide new features, performance improvements, and security enhancements.
- 올바른 펌웨어를 다운로드하세요 file for your NVR model.
- Transfer the firmware to a USB drive.
- 로 이동 Configuration > System > Maintenance > Upgrade 화면의 지시를 따르세요.
- Do not power off the NVR during the upgrade process.
4.2 하드 드라이브 관리
Monitor the health of your hard drives via Configuration > Storage > HDD. If a drive shows errors or fails, replace it promptly. You can also format drives from this menu.
4.3 시스템 백업 및 복원
It is recommended to regularly back up your NVR's configuration settings. This can be done via Configuration > System > Maintenance > Import/Export. You can export the configuration to a USB drive and restore it if needed.
4.4 청소
Periodically clean the NVR's exterior with a soft, dry cloth. Ensure ventilation openings are free from dust to maintain proper airflow and prevent overheating.
5. 문제 해결
This section addresses common issues you might encounter. For more complex problems, refer to the Hikvision support web사이트 또는 기술 지원팀에 문의하세요.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| NVR 전원이 켜지지 않습니다. | Power cable disconnected; faulty power supply; power outlet issue. | Check power cable connection; test power outlet; contact support if power supply is suspected faulty. |
| 모니터에 비디오 출력이 없습니다 | HDMI cable loose/faulty; incorrect monitor input; NVR resolution mismatch. | Check HDMI cable; ensure monitor is on correct input; try a different monitor or cable; access NVR via web interface to adjust resolution. |
| Cameras not connecting/displaying | PoE cable issue; camera faulty; incorrect camera IP/credentials; network conflict. | Check PoE cable connections; verify camera power; ensure camera IP is correct and not conflicting; check camera status in NVR configuration. |
| 녹음 없음 | Hard drive full/faulty; recording schedule not set; camera not added/enabled. | Check HDD status and capacity; configure recording schedule; ensure cameras are added and enabled for recording. |
| Cannot access NVR via network | Incorrect IP address/gateway; network cable issue; firewall blocking access. | Verify NVR's IP address and gateway; check network cable; temporarily disable firewall for testing; ensure NVR and PC are on the same subnet. |
6. 사양
The following table outlines the key technical specifications for the Hikvision DS-7732NI-I4/16P-12TB NVR.
| 특징 | 사양 |
|---|---|
| 모델 | DS-7732NI-I4/16P-12TB |
| 비디오 입력 | 32개 채널 |
| 비디오 압축 | H.265 + / H.265 / H.264 + / H.264 |
| 최대 녹화 해상도 | 최대 12MP |
| PoE 포트 | 16개의 독립적인 PoE 네트워크 인터페이스 |
| SATA 인터페이스 | 4 SATA interfaces for 4 HDDs |
| 사전 설치된 스토리지 | 12TB (확장 가능) |
| 비디오 출력 | HDMI 1 개, VGA 1 개 |
| 치수(폭 x 깊이 x 높이) | 15.4 x 17.5 x 2.8인치(390 x 445 x 70mm) |
| 무게(HDD 제외) | 11.02파운드(5kg) |
| 제조업체 | 히크비전 미국 |
7. 보증 및 지원
7.1 보증 정보
For specific warranty terms and conditions applicable to your Hikvision DS-7732NI-I4/16P-12TB NVR, please refer to the warranty card included with your product or the official Hikvision web해당 사이트. 보증 범위는 일반적으로 정상적인 사용 조건에서 발생하는 재료 및 제조상의 결함을 포함합니다.
7.2 기술 지원
Should you require technical assistance, please visit the official Hikvision support website. You can find comprehensive FAQs, troubleshooting guides, software downloads, and contact information for technical support. When contacting support, please have your NVR model number (DS-7732NI-I4/16P-12TB) and serial number readily available.
Official Hikvision Support: https://www.hikvision.com/us/support/
