SmartGen HGM501 수동 시동 발전기 컨트롤러 사용 설명서
모델: HGM501
소개
This manual provides comprehensive instructions for the installation, operation, and maintenance of the SmartGen HGM501 Manual Start Generator Controller. The HGM501 is a smart digital controller designed for the control and protection of single-engine generator sets, offering functions such as start/stop, data measurement, alarm indication, and shutdown protection. Its microprocessor-based design ensures precise parameter measurement and ease of use, making it a reliable component for various generator applications.
제품 끝view
The SmartGen HGM501 controller features a user-friendly interface with LED indicators and buttons for various functions. It is designed for front panel mounting and is suitable for 1-3 phase gasoline and diesel generator sets.
이미지 1: 앞쪽 view of the SmartGen HGM501 Generator Controller, showing the digital displays for Voltage (V) and Power (kW), along with indicators for Frequency (Hz), Current (A), Battery voltage (V), Run time (H), Engine Temp (°C), Generator Temp (°C), Auto protection, Run on indicator, and Crank indicator. Control buttons (Up, Down, Left, Right, FUNC) are also visible, along with an Engine oil warning light.
이미지 2: 각진 앞면 view of the SmartGen HGM501 Generator Controller, providing a perspective of its compact design and the layout of its display and control elements.
주요 특징은 다음과 같습니다.
- Manual and remote start/stop capabilities.
- Suitable for 1-3 phase gasoline and diesel generator sets.
- Designed for front panel mounting.
- Generator protection with built-in alarms and warnings.
- Reliable operation, surviving cranking dropouts.
기술 데이터 및 사양
The following table details the technical specifications of the HGM501 controller:
이미지 3: A table outlining the technical data for the HGM501 controller, including operating voltage, overall consumption, alternator voltage inputs, alternator frequency, relay outputs, case dimensions, C.T. secondary current, operating conditions, storage conditions, protection level, insulation strength, and weight.
| 매개변수 | 세부 |
|---|---|
| 운영 볼륨tage | DC9.0V to 18V (uninterrupted power supply - DC12V system used) |
| 전체 소비 | <2W(대기 모드 ≤1W) |
| 발전기 Voltage 입력 | Single phase 2-wire (L and N only): AC 30V - 360V (ph-N) 2-phase 3-wire (L and N only): AC 30V - 360V (ph-N) 3-phase 4-wire (L and N only): AC 30V - 360V (ph-N) |
| 발전기 주파수 | 50/60Hz |
| 릴레이 출력 시작 | 7A DC12V power supply output |
| 연료 릴레이 출력 | 7A DC12V power supply output |
| 케이스 치수 | 118mm x 128mm x 36mm |
| C.T. Secondary Current | 정격 5mA |
| 작동 조건 | Temperature: (-25~+70)°C, Humidity: (20~90)% |
| 보관 조건 | 온도: (-30~+80)°C |
| 보호 수준 | IP42 |
| 절연 강도 | Object: input/output/power supply, Quoted standard: IEC688-1992, Test method: AC1.5KV/1min Leakage current 3mA |
| 무게 | 0.216kg |
| 제품 치수 | 4.65 x 5.04 x 1.42인치; 13.05온스 |
| 품목 모델 번호 | HGM501 |
설치
패널 마운팅
The HGM501 controller is designed for panel mounting. It is secured using fixing clips. Ensure the cutout dimensions are followed for proper fit.
이미지 4: Diagram showing the overall dimensions of the HGM501 controller (side and front views) and the required panel cutout dimensions for installation. All units are in millimeters (mm).
배선도
Refer to the typical wiring diagram below for connecting the HGM501 controller to your generator set. Ensure all connections are secure and follow local electrical codes.
이미지 5: A typical wiring diagram for the HGM501 controller, illustrating connections for generator voltage (GEN), load (LOAD), battery (B+), crank, fuel, engine temperature (ENGINE TEMP), generator temperature (GEN TEMP), and oil pressure input (OPL INPUT). The diagram also shows the electrical switch for OFF/ON/START positions.
메모: Always disconnect power before performing any wiring or installation procedures. Consult a qualified electrician if you are unsure about any wiring steps.
작업
수동 시작/중지
- 시동 전 점검 사항: Ensure all generator connections are secure and fuel levels are adequate.
- 시작: Turn the electrical switch to the 'START' position. The controller will initiate the cranking sequence. Monitor the display for engine status.
- 달리기: Once the engine starts, the controller will display operational parameters such as voltage, power, frequency, and temperatures.
- 멎는: To stop the generator, turn the electrical switch to the 'OFF' position.
모니터링 및 경보
The HGM501 continuously monitors critical generator parameters. In case of an abnormal condition, the controller will trigger an alarm and may initiate a shutdown to protect the generator. Refer to the front panel indicators for specific alarm conditions, such as the 'Engine oil warning' light.
유지
- 정기 청소: Keep the controller's front panel clean and free from dust and debris. Use a soft, dry cloth. Do not use abrasive cleaners or solvents.
- 연결 확인: 정기적으로 모든 배선 연결부를 점검하여 단단히 고정되어 있고 부식이 없는지 확인하십시오.
- 환경 조건: Ensure the operating environment remains within the specified temperature and humidity ranges to prolong the controller's lifespan.
- 펌웨어 업데이트: 제조사 확인해보세요 website for any available firmware updates, though this model may not support user updates.
문제 해결
If the controller or generator set is not operating as expected, consider the following basic troubleshooting steps:
- 컨트롤러에 전원이 공급되지 않습니다: Check the DC power supply connections and battery voltage.
- 발전기가 시작되지 않습니다: Verify fuel levels, battery charge, and starter motor connections. Check for any active alarm indicators on the controller.
- 잘못된 판독: Ensure all sensor connections (voltage, current, temperature) are correctly wired and secure.
- 알람 표시: Identify the specific alarm indicated by the LED or display. Refer to the generator set's manual for specific alarm codes if applicable.
- 컨트롤러 오작동: If the controller exhibits erratic behavior, try cycling the power (turn off and on). If the issue persists, contact technical support.
보증 및 지원
For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official SmartGen-America web대지. 보증 청구를 위해 구매 영수증을 보관하십시오.
