1. 서론
This manual provides detailed instructions for the operation and maintenance of the SATLINK WS-6980 DVB-S2/C/T2 Combo Digital Satellite Finder Meter. The WS-6980 is a versatile handheld device designed for the installation and verification of digital satellite, terrestrial, and cable television signals. It features a 7-inch high-definition TFT LCD screen, DVB-S/S2, DVB-T/T2, and DVB-C compatibility, and includes advanced analysis tools such as a constellation analyzer and spectrum analyzer.
2. 안전 정보
- 장치를 비나 습기에 노출시키지 마십시오.
- 극한의 온도 변화를 피하십시오. 권장되는 환경 조건 내에서 기기를 작동 및 보관하십시오.
- 제공된 전원 어댑터와 차량용 충전 케이블만 사용하십시오.
- 기기를 직접 열거나 수리하지 마십시오. 모든 정비는 자격을 갖춘 기술자에게 맡기십시오.
- 과열을 방지하기 위해 작동 중에는 적절한 환기를 보장하십시오.
3. 제품 오버view
The SATLINK WS-6980 is equipped with a robust set of features for signal analysis. Below are key components and an overview of the main menu interface.
그림 3.1: 앞쪽 view of the SATLINK WS-6980 displaying the main menu. The screen shows icons for various functions including DVB-S/S2, DVB-T/T2, DVB-C, Spectrum analysis, Loop Search, Other tools, Multimedia, and System Settings. A keypad and navigation buttons are visible on the right.
그림 3.2: 뒤쪽 view of the SATLINK WS-6980, illustrating the connectivity ports. These include HDMI IN/OUT, DC IN, and various antenna/LNB connections.
4. 설정
4.1 초기 충전
Before first use, fully charge the device's internal 7.4V/5000mAh Li-ion battery using the provided 12V power charger. The charging indicator light will show the charging status.
4.2 전원 켜기/끄기
Press and hold the power button located on the device to turn it on or off. The device will display the main menu upon startup.
4.3 기본 연결
- Satellite (DVB-S/S2): Connect the LNB cable from your satellite dish to the F-type connector labeled 'LNB IN'.
- 지상파/케이블(DVB-T/T2/C): Connect your antenna or cable signal to the female type connector labeled 'ANT IN' or 'CABLE IN'.
- AV/HDMI: Use the AV IN/OUT or HDMI IN/OUT ports for connecting to external displays or receiving video input.
5. 사용 설명서
5.1 메인 메뉴 탐색
Use the directional buttons and the 'OK' button to navigate through the main menu. The main menu provides access to all primary functions of the device.
그림 5.1: The System Setting menu on the WS-6980, showing options for Country Setting, OSD Language, TV Format, Video Output, TV Resolution, Digital Audio Output, Time Zone, Channel Lock, and PWR Unit.
5.2 위성 신호 탐지 (DVB-S/S2)
- From the main menu, select 'DVB-S/S2'.
- Navigate to the 'Satellite Find' screen.
- Select the desired satellite from the list or manually enter parameters such as Local Frequency, Transponder, Frequency, Symbol Rate, and Polarity.
- Adjust DISEQC settings (1.0/1.1/1.2) and 0/22kHz Tone as required for your setup.
- The device will display signal strength and quality. Use the 'Auto Scan' or 'TP Scan' functions to find channels.
그림 5.2: The Satellite Find menu on the WS-6980, allowing selection of satellite, local frequency, transponder, frequency, symbol rate, polarity, tone, beep tone, and DiSEqC mode.
그림 5.3: Signal measurement screen on the WS-6980, showing power (PWR), carrier-to-noise ratio (CN), bit error rate (BER), and modulation error ratio (MER). It also includes an electronic compass for azimuth (AZ) and elevation (EL) angle calculation.
5.3 지상파/케이블 신호 탐지(DVB-T/T2/C)
Similar to satellite finding, select 'DVB-T/T2' or 'DVB-C' from the main menu. Configure the input frequency and other relevant parameters. The device supports auto and manual scanning for channels.
5.4 Constellation and Spectrum Analyzer
Access these advanced analysis tools from the main menu under 'Spectrum' or within the DVB-S/S2/C/T2 modes. These features provide visual representations of signal quality and interference, aiding in precise antenna alignment and troubleshooting.
5.5 광 전력 감지
The device includes an optical power detection function. Connect the optical fiber to the designated port to measure optical signal strength.
5.6 기타 기능
- 전자 나침반: Automatically calculates Azimuth (AZ) and Elevation (EL) angles for satellite dish alignment.
- 플래시: Built-in flashlight for use in low-light conditions.
- DC12V 출력: Provides 12V DC power output for external devices.
- LNB/ANT/DC12V Short Protect: Integrated protection against short circuits on LNB, antenna, and DC12V output ports.
6. 유지관리
6.1 배터리 관리
To prolong battery life, avoid fully discharging the battery frequently. Recharge the device regularly, especially if it will be stored for extended periods.
6.2 청소
Clean the device with a soft, dry cloth. Do not use liquid cleaners or solvents. Keep the screen free of dust and smudges for optimal visibility.
6.3 소프트웨어 업그레이드
The device's software can be upgraded via the USB port. Refer to the official SatLink web최신 펌웨어와 지침은 사이트에서 확인하세요.
7. 문제 해결
- 전원 없음: 배터리가 충전되어 있는지 또는 기기가 전원 어댑터에 연결되어 있는지 확인하십시오. 전원 버튼을 확인하십시오.
- 신호가 감지되지 않았습니다: Verify all cable connections are secure. Check LNB/antenna alignment and settings (frequency, symbol rate, polarity, DiSEqC). Ensure the correct DVB mode (S/S2, T/T2, C) is selected.
- 신호 품질 불량: Adjust antenna/dish alignment. Check for obstructions. Inspect cables and connectors for damage. Use the spectrum and constellation analyzers to identify interference.
- 화면 문제 : If the screen is unresponsive or displays incorrectly, try restarting the device. If the issue persists, contact support.
8. 사양
| 특징 | 사양 |
|---|---|
| 표시하다 | 7인치 고화질 TFT LCD 화면 (1024*600) |
| 규정 준수 | DVB-S/S2, T/T2/C, MPEG-2/MPEG-4 표준을 완벽하게 준수합니다. |
| 비디오 디코딩 | MPEG-2/MPEG-4 H.264 Hardware decoding (8 Bit, does not support 10 Bit) |
| 위성 입력 주파수 | 950~2150MHz |
| 지상파/케이블 입력 주파수 | 48~862MHz |
| LNB 공급 | 13V/18V, 최대 전류 400mA |
| ANT 공급 | 5V, 12V/24V 최대 100mA |
| Demodulation Type (Satellite) | QPSK, 8PSK, 16APSK |
| Demodulation Type (Terrestrial/Cable) | QPSK, 16QAM, 64QAM, 256QAM |
| 배터리 | 7.4V / 5000mAh 리튬 이온 배터리 |
| 치수(폭x깊이x높이) | 250mm x 156mm x 40mm(9.85 x 6.14 x 1.57인치) |
| 순중량 | 1kg(2.2파운드) |
| 연결성 | USB (for software upgrade), AV IN/OUT, HDMI IN/OUT |
9. 패키지 내용
The following items are included with your SATLINK WS-6980:
- 1x WS-6980 DVB-S2/C/T2 Combo HD Satellite Finder Meter
- 1x 12V Car charger cable
- 1x 12V Power Charger
- 1x 휴대용 케이스
- 1x 넥 스트랩
- 1x AV 케이블
- 1x 사용자 설명서(CD)
그림 9.1: Visual representation of the accessories included with the WS-6980, such as charging cables, AV cables, carrying case, and various connectors.
10. 보증 및 지원
For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official SatLink web사이트. 보증 청구를 위해 구매 증빙 자료로 구매 영수증을 보관하세요.
