소개
This manual provides comprehensive instructions for the setup, operation, and maintenance of your Anderic UC7078T (RR7078TR) Remote Control, designed for compatible Hampton Bay and Harbor Breeze ceiling fans. Please read this manual thoroughly before use to ensure proper functionality and longevity of your device.
제품 끝view
The Anderic RR7078TR is a replacement remote control specifically engineered for various Hampton Bay and Harbor Breeze ceiling fan models. It offers intuitive control over fan speed, light operation (including dimming), and the fan's reverse function.
This image displays the front of the Anderic RR7078TR remote control, showing the buttons for Light/Dimmer, Lo, Med, Hi, Fan Off, and Reverse. The Anderic brand logo and model number RR7078TR are visible at the bottom.
명확한 view of the Anderic RR7078TR remote control's front panel, highlighting the button layout for fan and light functions, including Light/Dimmer, Lo, Med, Hi, Fan Off, and Reverse.
설치 지침
1. 배터리 설치
The Anderic RR7078TR remote control requires one 9V battery (not included).
- 리모컨 뒷면에서 배터리 덮개를 찾으세요.
- 덮개를 밀어서 떼어냅니다.
- 9V 배터리 1개를 삽입할 때 극성(+/-)을 올바르게 맞춰주세요.
- 배터리 덮개를 다시 장착하세요.
2. 딥 스위치 설정
To ensure proper communication between the remote control and your ceiling fan receiver, the dip switches on both units must match.
- On the Remote (Transmitter):
- 배터리 커버를 제거합니다.
- Locate the dip switches inside the battery compartment.
- Using a small screwdriver or ballpoint pen, slide the switches to your desired ON or OFF positions. It is recommended to avoid using the factory default setting (all switches in the UP position) to prevent potential interference with other devices.
- 배터리 커버를 다시 장착하세요.
- 수신기에서:
- Access the ceiling fan receiver (typically located in the fan's canopy).
- Locate the dip switches on the receiver.
- Slide the receiver's dip switches to exactly match the pattern you set on your remote control.
This image shows the rear of the Anderic RR7078TR remote control with the battery cover open. A 9V battery is visible, along with the dip switch panel and a label providing instructions for setting the code.
A diagram showing how to set the code switches on both the remote control (transmitter) and the ceiling fan receiver. Figure A depicts the transmitter with its code switches, and Figure B shows the receiver with its corresponding code switches, emphasizing that they must match.
메모: The remote and receiver depicted in images may look different from your actual product. Ensure your fan is operated in "HIGH SPEED" and the light is in "ON" condition at the switch knob during installation.
작동 지침
Once the dip switches are matched and the battery is installed, your remote is ready for use.
- Light / Dimmer: Press this button to turn the light ON or OFF. Hold the button down to dim or brighten the light.
- 팬 끄기: Press this button to turn the ceiling fan OFF.
- 봐라: Press this button for low fan speed.
- Med : Press this button for medium fan speed.
- 안녕: Press this button for high fan speed.
- 뒤집다: Press this button to change the direction of the fan blades. This function is typically used to circulate cool air downwards in summer or draw warm air upwards in winter.
유지
- 배터리 교체: Replace the 9V battery when the remote's range decreases or buttons become unresponsive. Always use a fresh 9V alkaline battery.
- 청소: Wipe the remote control with a soft, dry cloth. Do not use liquid cleaners or solvents, as they may damage the remote's electronics or finish.
- 저장: If storing the remote for an extended period, remove the battery to prevent leakage and potential damage to the device.
문제 해결
| 문제 | 해결책 |
|---|---|
| 리모컨이 응답하지 않습니다. | Check battery installation and charge. Ensure dip switches on remote and receiver match. Verify the fan's wall switch is ON. |
| Fan or light not turning on/off. | Confirm the fan's power supply is active. Re-check dip switch settings. Ensure the fan's pull chain (if any) is set to the highest speed and light is ON. |
| Light not dimming. | Verify your fan's light kit supports dimming. Some LED bulbs may not be dimmable. Hold the Light/Dimmer button longer for dimming functionality. |
| Fan operates but light does not, or vice versa. | This may indicate an issue with the receiver or the fan's wiring. Consult a qualified electrician if basic troubleshooting fails. |
명세서
- 모델: RR7078TR
- 호환 수신기: FAN2R, UC7051R, UC7067REVB, and others.
- 전원: 1 x 9V 배터리(포함되지 않음)
- 기능: Fan Off, Low/Medium/High Fan Speed, Light On/Off/Dimmer, Reverse Fan Direction.
- 치수: 약 2.7 x 1.8 x 6.1인치
- 무게: (배터리 제외) 약 3.2온스
- 연결 기술 : 적외선
보증 및 지원
Anderic products are designed for reliability and performance. For specific warranty details regarding your RR7078TR remote control, please refer to the manufacturer's official website or contact Anderic customer support directly.
추가적인 도움이 필요하시거나 본 설명서에 나와 있지 않은 질문이 있으시면 다음 웹사이트를 방문해 주십시오. Amazon의 Anderic Store or contact their customer service for expert guidance.
