Hager SVN129

Hager SVN129 LED Pilot Light Instruction Manual

Model: SVN129 | Brand: Hager

1. 서론

This instruction manual provides essential information for the safe installation, operation, and maintenance of the Hager SVN129 LED Pilot Light. The SVN129 is a compact indicator designed for electrical panels and control systems, featuring red, green, and orange LED illumination and operating on a 230V AC supply.

설치하기 전에 이 설명서를 자세히 읽고 나중에 참고할 수 있도록 보관하세요.

2. 안전 정보

경고: Electrical installation should only be performed by qualified and authorized personnel. Failure to follow these instructions may result in electric shock, fire, or serious injury.

3. 제품 오버view

The Hager SVN129 is an LED pilot light designed for clear visual indication within electrical systems. Its key features include:

Hager SVN129 LED Pilot Light showing its compact design and multi-color indicator.

Figure 1: Hager SVN129 LED Pilot Light. This image displays the front view of the SVN129 LED pilot light, highlighting its compact form factor suitable for integration into electrical panels. The indicator features a clear lens, designed to display red, green, or orange light depending on the operational status.

4. 설정 및 설치

Installation of the Hager SVN129 LED Pilot Light should be carried out by a qualified electrician in accordance with all applicable electrical standards and regulations.

  1. 전원 차단: Ensure the main power supply to the installation area is completely disconnected and secured against accidental re-connection.
  2. 설치: The SVN129 is designed for DIN rail mounting. Snap the device onto the DIN rail in the desired position within the electrical enclosure.
  3. 배선: Connect the 230V AC supply wires to the designated terminals on the pilot light. Refer to the wiring diagram on the device or packaging for correct polarity and connection points. Typically, these devices have two terminals for line and neutral connections.
  4. 보안 연결: 단자 나사가 단단히 조여져 연결 불량을 방지하십시오. 연결이 느슨해지면 과열이나 간헐적인 작동이 발생할 수 있습니다.
  5. 확인: Double-check all wiring connections before restoring power.
  6. 전원 복원: Restore power to the circuit. The pilot light should illuminate according to the circuit status it is monitoring.

5. 사용 설명서

The Hager SVN129 LED Pilot Light operates as a visual indicator. Once correctly installed and connected to a 230V AC circuit, it will illuminate to indicate the status of that circuit or a specific condition within an electrical system.

6. 유지관리

The Hager SVN129 LED Pilot Light is designed for minimal maintenance. However, periodic checks can ensure continued reliable operation.

7. 문제 해결

If the Hager SVN129 LED Pilot Light is not functioning as expected, consider the following troubleshooting steps:

For issues not covered here, contact a qualified electrician or Hager customer support.

8. 사양

특징세부 사항
모델 번호SVN129
상표헤이거
Lamp 유형주도의
LED 색상빨강, 녹색, 주황색
권tage230V 교류
Assigned Frequency50/60Hz
모듈 수1
왓tage7 와트
품목 패키지 수량1
배터리가 필요하세요?아니요
제조업체헤이거

9. 보증 및 지원

보증 조건에 관한 자세한 내용은 구매 시 제공된 문서를 참조하거나 Hager 공식 웹사이트를 방문하십시오. website. For technical support or inquiries, please contact Hager customer service through their official channels.

참고: 제품 사양 및 외관은 사전 고지 없이 변경될 수 있습니다.

관련 문서 - SVN129

사전view Hager TJA670/TJA470 domovea 기본/전문가 설치 설명서
이 문서는 Hager TJA670 domovea Basic 및 TJA470 domovea Expert 시스템의 설치 및 구성에 대한 포괄적인 가이드를 제공합니다.view, 소프트웨어 설치, 초기 설정, 프로젝트 관리, 사용 가능한 기능, 장치 세부 정보 및 외부 서비스와의 통합.
사전view Hager TRM690G 무선 송수신기: 설치 및 기술 가이드
Hager TRM690G는 백열등, 할로겐등 및 디밍 기능이 있는 LED 조명을 제어하도록 설계된 2선식 무선 송수신기입니다. 이 종합 안내서는 전기 전문가를 위해 설치, 작동, 구성 및 기술 사양을 자세히 설명합니다.
사전view Hager univers N U96N/UG31N1 및 U97N용 장착 지침
Hager's univers N 전기 인클로저 시스템에 대한 상세 설치 안내서로, U96N/UG31N1 및 U97N 모델을 포함합니다. 적절한 장착 및 조립을 위한 단계별 지침, 필요 공구, 토크 사양 및 안전 경고를 제공합니다.
사전view Hager UC52LAX1x 전기 인클로저 장착 지침
UC52LAX12 및 UC52LAX13을 포함한 Hager UC52LAX1x 시리즈에 대한 자세한 장착 지침 및 가이드로, 인클로저에 전기 부품을 설치하는 데 유용합니다.
사전view Hager 전기 부품 장착 설명서
Hager 전기 부품 설치에 대한 종합 안내서로, 배선 준비, 연결 절차 및 안전 예방 조치를 자세히 설명합니다. 기술 사양 및 토크 설정값도 포함되어 있습니다.
사전view 하거 모듈형 장치: 표시기 및 푸시 버튼
Hager의 다양한 모듈형 장치, 특히 표시등과 푸시 버튼을 살펴보세요. 이 문서에서는 다양한 표시등과 푸시 버튼의 사양, 종류 및 전기 회로에서의 적용 사례를 자세히 설명합니다.