소개
The Graco SnugRide i-Size Car Seat is designed to provide a safe and comfortable travel solution for your child. This car seat allows for rear-facing installation, suitable for toddlers up to 18 months of age. It features a 7-way adjustable seat, a removable seat reducer for newborns with side foam pads for optimal comfort, and a height-adjustable belt and headrest system. The integrated ISOFIX base ensures secure and straightforward installation in your vehicle, complemented by energy-absorbing foam for enhanced shock protection.
Image: The Graco SnugRide i-Size car seat in Night Black, shown with its ISOFIX base, ready for installation.
중요한 안전 정보
Please read all instructions carefully before using the car seat. Failure to follow these instructions could result in serious injury or death.
- Always ensure the car seat is correctly installed and secured in the vehicle according to the instructions.
- 카시트에 아이를 혼자 두지 마십시오.
- 안전벨트가 아이의 몸에 잘 밀착되도록 제대로 조절되었는지, 헐렁한 부분이 없는지 확인하십시오.
- The car seat is designed for rear-facing use for children up to 18 months of age.
- Do not use the car seat if it has been involved in an accident, even if there is no visible damage. Replace it immediately.
- 차량용 카시트 설치에 대한 자세한 지침은 차량 사용 설명서를 참조하십시오.
구성 요소
The Graco SnugRide i-Size Car Seat system includes the following main components:
- SnugRide i-Size Car Seat: The main seat unit with integrated harness system and canopy.
- ISOFIX 베이스: The base unit that attaches to your vehicle's ISOFIX anchors, providing a secure and stable platform for the car seat.
- Newborn Seat Reducer: Padded insert for infants, providing additional support and comfort.
이미지: 앞면 view of the Graco SnugRide i-Size car seat, highlighting the seat reducer and harness system.
설정 및 설치
Follow these steps to correctly install your Graco SnugRide i-Size Car Seat using the ISOFIX base.
Installing the ISOFIX Base:
- Position the ISOFIX base on the desired vehicle seat. Ensure the vehicle seat is suitable for ISOFIX installation.
- Extend the ISOFIX connectors from the base.
- Align the ISOFIX connectors with your vehicle's ISOFIX anchor points. Push the base firmly until the connectors click into place and the indicators turn green.
- Extend the load leg until it firmly touches the vehicle floor. Ensure the indicator on the load leg also turns green.
- Wiggle the base to ensure it is securely attached and does not move excessively.
Image: A woman demonstrating the installation of the ISOFIX base into a vehicle's rear seat.
베이스에 카시트 부착:
- Place the SnugRide i-Size car seat onto the installed ISOFIX base.
- Push down firmly until you hear an audible click, indicating the car seat is securely latched onto the base.
- Verify that the indicators on the base confirm correct attachment of the car seat (refer to base indicators for specific color/symbol).
카시트 작동법
아이를 좌석에 앉히는 방법:
- Open the harness buckles and position your child in the car seat.
- Bring the shoulder straps over your child's shoulders and connect the buckle tongues into the crotch buckle until they click.
- Pull the harness adjustment strap to tighten the harness until it is snug against your child's body. You should not be able to pinch any slack at the shoulder.
- 가슴 클립이 겨드랑이 높이에 있는지 확인하세요.
Image: A baby comfortably and securely seated in the Graco SnugRide i-Size car seat, demonstrating proper harness usage.
Adjusting the Headrest and Harness:
The headrest and harness system can be adjusted simultaneously with one hand to accommodate your child's growth.
- Locate the headrest adjustment lever, typically at the top rear of the car seat.
- Squeeze the lever and slide the headrest up or down to the desired position. The shoulder straps will adjust automatically.
- Ensure the shoulder straps are at or just below your child's shoulders for rear-facing use.
Image: A hand demonstrating the one-hand adjustment of the headrest and harness system on the car seat.
좌석 등받이 각도 조절:
The car seat offers a 7-way adjustable seat for optimal comfort and legroom as your child grows.
- Locate the recline adjustment handle, usually at the front or side of the base.
- Press the handle and adjust the seat to one of the 7 available recline positions.
- Ensure the recline angle is appropriate for your child's age and the vehicle's seating angle, maintaining a safe and comfortable position.
Image: A toddler seated in the Graco SnugRide i-Size car seat, illustrating the extended legroom provided by the adjustable seat.
유지
청소 지침:
- 패브릭 커버: Machine wash removable fabric covers in cold water on a delicate cycle. Do not bleach. Tumble dry on low heat or hang to dry.
- 하네스 스트랩: 하네스 스트랩을 광고용 천으로 닦으세요amp 천과 순한 비누로 닦아주세요. 안전벨트 끈은 세탁기에 넣거나 물에 담그지 마세요. 끈이 약해질 수 있습니다. web빙.
- 플라스틱 및 금속 부품: 플라스틱과 금속 부품은 물로 닦으세요.amp 천과 순한 비누. 연마성 세척제나 솔벤트를 사용하지 마십시오.
저장:
When not in use, store the car seat in a cool, dry place away from direct sunlight and extreme temperatures.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 차량용 시트를 설치한 후 헐렁한 느낌이 듭니다. | ISOFIX connectors not fully engaged or load leg not properly extended. | Ensure ISOFIX indicators are green. Re-extend load leg until its indicator is green and it is firmly braced against the floor. Push down firmly on the car seat while tightening. |
| 안전벨트 끈은 조이거나 풀기가 어렵습니다. | Harness may be twisted or buckle tongues are not fully inserted. | Check for twists in the harness straps. Ensure both buckle tongues are fully inserted into the crotch buckle before pulling the adjustment strap. |
| Child's head slumps forward. | Incorrect recline angle or headrest position. | Adjust the seat to a more reclined position. Ensure the headrest is adjusted so the shoulder straps are at or just below your child's shoulders. |
명세서
- 모델 번호: 1986604
- 제품 크기: 54 x 35 x 72cm
- 품목 무게: 12.3kg
- 색상: Blackone
- 재료 유형: 거품
- 스타일: 자동차 시트
- 제조업체 권장 최대 하중: 13 킬로그램
- 연령대 (설명): 유아
- 설치 유형: ISOFIX Base (integrated)
- 제조업체: NEWELL GERMANY GMBH
- 첫 이용 가능 날짜: 30년 2017월 XNUMX일
보증 및 지원
For warranty information, product registration, or further support, please visit the official Graco web사이트를 방문하거나 고객 서비스 부서에 문의하세요. 보증 청구를 위해 구매 증빙 자료를 보관하세요.
그라코 공식 Web대지: www.gracobaby.com
