1. 서론
This manual provides detailed instructions for the installation, usage, and maintenance of your KES Stainless Steel Bathroom Shelf, Model BSC205S40A-2. Please read these instructions carefully before installation and retain them for future reference.
Image 1.1: The KES Stainless Steel Bathroom Shelf, Model BSC205S40A-2, shown with various toiletries.
2. 제품 특징
- 재료: Constructed from high-quality SUS304 stainless steel, ensuring durability and resistance to corrosion.
- 마치다: Features a brushed finish for a modern aesthetic.
- 설계: Square, wall-mounted design optimizes space and keeps items secure with a raised edge.
- 다재: Suitable for use in bathrooms, showers, and kitchens.
Image 2.1: Detail highlighting the SUS304 Stainless Steel construction, which provides anti-corrosion and anti-rust properties.
Image 2.2: The shelf's design includes a 62mm high retaining bar to prevent items from falling.
3. 사양
| 상표 | 케스 |
| 모델 번호 | BSC205S40A-2 |
| 재료 | SUS304 스테인리스 스틸 |
| 마무리 유형 | 브러시드 마감 |
| 제품 크기 (가로 x 세로 x 높이) | 15.7인치 x 4.8인치 x 2.4인치(400mm x 123mm x 62mm) |
| 모양 | 정사각형 |
| 품목 무게 | 2.4파운드 |
| 한국어: | 712411926830 |
Image 3.1: Dimensional diagram of the KES Bathroom Shelf.
4. 패키지 내용
설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.
- 1 x KES Stainless Steel Bathroom Shelf
- Mounting Hardware (screws, wall anchors, decorative caps)
Image 4.1: The shelf and its complete set of mounting hardware.
5. 설치 지침
The KES Bathroom Shelf can be installed using screws for a secure, permanent mount. Follow these steps for proper installation:
- 위치를 선택하십시오 : Select a suitable wall location, ensuring it is level and can support the shelf's weight and contents. Consider the height and accessibility.
- 드릴링 지점 표시: Hold the shelf against the wall at the desired position. Use a pencil to mark the locations for the mounting holes.
- 드릴 구멍: Using an appropriate drill bit for your wall type (e.g., masonry bit for tile/concrete, wood bit for studs), drill holes at the marked points. If installing into drywall without a stud, insert the provided wall anchors.
- 마운트 셸프: Align the shelf's mounting holes with the drilled holes. Insert the screws through the shelf and into the wall anchors or studs. Tighten the screws until the shelf is firmly secured to the wall.
- Apply Decorative Caps: Place the decorative caps over the screw heads for a clean, finished appearance. Ensure the tabs inside the caps fit under the screw heads for a secure pop-on fit.
Image 5.1: The KES Bathroom Shelf installed on a wall. It is recommended for installation in dry areas.
설치 비디오 가이드
Video 5.1: This video demonstrates the installation process and various uses of the KES Bathroom Shelf, Model BSC205A (similar to BSC205S40A-2).
6. 이용 가이드라인
The KES Bathroom Shelf is designed to organize various items in your bathroom, shower, or kitchen. To ensure optimal performance and longevity:
- Place items securely within the shelf's boundaries.
- Avoid overloading the shelf beyond its intended capacity.
- While rust-resistant, prolonged exposure to standing water should be minimized to maintain the finish.
이미지 6.1: Examples of the shelf's versatile use in both bathroom and kitchen environments.
7. 관리 및 유지 보수
To keep your KES Stainless Steel Bathroom Shelf in excellent condition:
- 부드러운 천으로 정기적으로 청소하세요.amp 옷감.
- 잘 지워지지 않는 얼룩은 순한 비눗물에 적셔 깨끗이 헹궈주세요.
- Avoid abrasive cleaners, scouring pads, or harsh chemicals, as these can damage the brushed finish.
- Dry the shelf completely after cleaning to prevent water spots and maintain its appearance.
8. 문제 해결
If you encounter any issues with your KES Bathroom Shelf, consider the following:
- Shelf is Loose: Ensure all mounting screws are tightened securely. If wall anchors were used, verify they are properly seated in the wall.
- 물 얼룩/자국: These are typically caused by mineral deposits from water. Clean with a vinegar-water solution and dry immediately.
- 녹이 나타남: While made of rust-resistant stainless steel, prolonged exposure to certain chemicals or highly corrosive environments can affect the finish. Ensure proper ventilation and regular cleaning.
9. 보증 및 지원
For warranty information or technical support regarding your KES Stainless Steel Bathroom Shelf, please contact KES customer service through their official website or the retailer where the product was purchased. Please have your model number (BSC205S40A-2) and proof of purchase available.
