Megger MIT515-US 5kV 절연 테스터 사용 설명서

1. 서론

This manual provides essential instructions for the safe and effective operation, maintenance, and troubleshooting of the Megger MIT515-US 5kV Insulation Tester. The MIT515-US is a robust, portable instrument designed for measuring insulation resistance in high-voltage electrical systems, including cables, transformers, motors, and generators. It offers a range of test voltages up to 5kV and advanced diagnostic capabilities.

2. 안전 정보

경고: Always read and understand all safety instructions before operating the Megger MIT515-US. Failure to follow these instructions can result in serious injury or death, and damage to the equipment.

• The MIT515-US is rated for CAT IV 600 V. Always adhere to safety standards for high-voltag전자 테스트.
• Ensure the instrument and test leads are in good condition before use. Do not use if damaged.
• 항상 접지선을 먼저 연결하고 마지막에 분리하세요.
• Do not touch test leads or the circuit under test during operation. High voltages가 존재합니다.
• Verify that the circuit under test is de-energized before connecting the tester, unless performing live voltage measurements with appropriate precautions.
• Use only Megger-approved accessories and replacement parts.

3. 제품 오버view

The Megger MIT515-US is a compact and lightweight insulation resistance tester featuring an intuitive interface and robust construction. Key components include the display, control buttons, rotary switches for test selection, and safety-rated terminals.

Figure 1: Megger MIT515-US Front Panel
This image displays the front panel of the Megger MIT515-US 5kV Insulation Tester. Visible elements include the digital display showing test voltage (5105 V), resistance (10 TΩ), and current (-0.1 nA), along with a timer (2:12 ms). The top section features red (+) and black (-) test terminals, and a blue GUARD terminal, all rated CAT IV 600V. On the right, there's an 'OK' button cluster for navigation and a red 'TEST' button. The lower left has a rotary switch for IR, DAR, and PI tests. The lower right has a rotary switch for selecting test voltages: OFF, 250V, 500V, 1kV, 2.5kV, and 5kV. The device is housed in a rugged, grey and black case.

3.1 주요 특징

• 테스트 볼륨tag에스: Selectable from 250 V to 5 kV.
• 저항 측정: Up to 10 TΩ.
• 진단 검사: Polarization Index (PI), Dielectric Absorption Ratio (DAR), Dielectric Discharge (DD), Step Voltage (SV), and Ramp 시험.
• 안전 등급: CAT IV 600 V on all terminals.
• 힘: Rechargeable Lithium-ion battery with rapid charge capability, also operates from line power.
• 표시하다: Analog/digital display for clear readings.
• Guard Terminal: Industry-best guard terminal performance for enhanced accuracy.

4. 설정

4.1 배터리 충전

The MIT515-US is equipped with a Lithium-ion battery. Before initial use, fully charge the battery. Connect the provided power cord to the instrument's power input and then to a suitable AC power source. The battery status indicator on the display will show charging progress. A full charge typically takes 2.5 hours, providing approximately 1 hour of testing after a 0.5-hour charge.

4.2 테스트 리드 연결

1. Ensure the MIT515-US is powered off and the test voltage selector is in the 'OFF' position.
2. Connect the red test lead to the positive (+) terminal on the instrument.
3. Connect the black test lead to the negative (-) terminal on the instrument.
4. For applications requiring a guard circuit to minimize surface leakage currents, connect the blue guard lead to the 'GUARD' terminal.
5. Connect the test leads to the equipment under test, ensuring proper polarity and secure connections. Always connect the ground lead first to the equipment under test.

5. 사용 설명서

5.1 전원 켜기/끄기

To power on the instrument, rotate the test voltage selector switch from 'OFF' to any desired voltage setting. To power off, rotate the switch back to 'OFF'.

5.2 Performing an Insulation Resistance (IR) Test

1. Connect the test leads to the circuit under test as described in Section 4.2.
2. Rotate the diagnostic test selector switch to 'IR'.
3. 원하는 테스트 볼륨을 선택하세요tage (e.g., 500V, 1kV, 2.5kV, 5kV) using the voltage 선택 스위치.
4. Press and hold the red 'TEST' button to initiate the test. The instrument will apply the selected voltage and display the insulation resistance.
5. Release the 'TEST' button to stop the test. The instrument will automatically discharge the circuit.
6. Record the displayed resistance value.

5.3 Performing Diagnostic Tests (PI, DAR, DD, SV, Ramp)

The MIT515-US offers advanced diagnostic tests for a more comprehensive assessment of insulation quality.

• Polarization Index (PI) and Dielectric Absorption Ratio (DAR): Select 'PI' or 'DAR' on the diagnostic test selector. These tests automatically measure resistance at specific time intervals (e.g., 30s, 60s, 10min) and calculate the ratio. Follow on-screen prompts.
• 유전 방전(DD): Select 'DD' on the diagnostic test selector. This test measures the current discharged from the insulation after a period of charging, indicating insulation degradation.
• 단계 볼륨tage(SV)와 Ramp 시험: These tests involve applying increasing 권tage steps or a continuously rising voltage to detect insulation weaknesses that might not be apparent at a single test voltage. Refer to the on-screen menu and 'OK' button for navigation and parameter setup.

5.4 Voltmeter Function

The instrument includes a dedicated voltmeter function (30 V to 660 V) with frequency measurement. This allows users to check for induced voltages in a circuit before performing insulation tests. Select the 'V' position on the voltage selector switch to activate this function.

6. 유지관리

6.1 청소

Clean the instrument's exterior with a damp cloth and mild detergent. Do not use abrasive cleaners or solvents. Ensure no moisture enters the instrument.

6.2 배터리 관리

To prolong battery life, avoid fully discharging the battery frequently. Store the instrument with a partial charge if it will not be used for an extended period. If the battery is fully discharged, the unit can still operate from line power while charging.

6.3 테스트 리드 검사

Regularly inspect test leads for any signs of damage, such as cuts, cracks, or frayed insulation. Replace damaged leads immediately with Megger-approved replacements to maintain safety and measurement accuracy.

7. 문제 해결

8. 사양

• 모델: MIT515-US (1001-936)
• 테스트 볼륨tage: 5.0 kV, 2.5 kV, 1.0 kV, 500 V, 250 V; 10 V steps from 50 V to 1 kV; 25 V steps from 1 kV to max. test voltage.
• 저항 측정 범위: Up to 10 TΩ for 5 kV models.
• 정확성: 5% up to 1 TΩ at 5 kV.
• 안전 등급: CAT IV 600 V on all terminals.
• 작동 온도: -4°F ~ +122°F(-20°C ~ +50°C).
• 전원: Rechargeable Lithium-ion battery and line power.
• 배터리 충전 시간: 2.5 hours for full charge (0.5 hour charge for 1 hour testing).
• 치수: Approximately 17.3 x 13.9 x 12.8 inches (Package Dimensions).
• 무게: Approximately 1 Pound (Item Weight).

9. 보증 및 지원

For warranty information, technical support, or service, please contact Megger customer service or visit the official Megger web사이트. 보증 청구를 위해 구매 증빙 자료로 구매 영수증을 보관하세요.