Leviton Decora Smart Wi-Fi 15A Universal LED/Incandescent Switch (DW15S-1BZ) Instruction Manual

소개

The Leviton Decora Smart Wi-Fi 15A Universal LED/Incandescent Switch allows you to control your lighting from anywhere using the My Leviton app. This device is designed to replace existing single-pole or multi-way switches, offering advanced control features without requiring a separate hub. It is compatible with LED and CFL loads up to 600W, incandescent loads up to 1800W, and fluorescent loads up to 15A. A neutral wire is required for functionality.

주요 특징:

• 허브 필요 없음: Control directly via the My Leviton app.
• 촬영 일정 및 장면: Create custom schedules, including sunrise/sunset, and lighting scenes.
• 음성 제어: Works with Amazon Alexa and Google Assistant (devices sold separately).
• 호환성: Integrates with IFTTT, SmartThings, August, Amazon Alexa, and Google Assistant.
• 신뢰할 수 있는 작동: Pre-set schedules are stored within the device for consistent performance.

설정

설치에 필요한 도구:

• 납작한 스크루 드라이버
• Phillips 헤드 스크루 드라이버
• Electrician's Pliers
• 와이어 스트리퍼
• 전기 테이프
• Handheld Voltag전자 테스터

설치 지침:

안전이 최우선입니다. To avoid fire, shock, or death, always turn off the power at the circuit breaker or fuse before wiring. Use a voltage 테스터는 전원이 꺼져 있는지 확인합니다.

Image: The Leviton Decora Smart Wi-Fi 15A Universal LED/Incandescent Switch, shown in white, ready for installation.

1. 전원 끄기: 회로 차단기 패널을 찾아 교체할 스위치의 전원을 끄세요. 볼륨을 사용하여 전원이 꺼졌는지 확인하세요.tag전자 테스터.
2. 전선 식별: Carefully remove the existing switch. Identify the hot wire (often black or red), neutral wire (usually white), and ground wire (green or bare copper). Use electrical tape to label the hot wire. If unsure about wiring, consult a licensed electrician.
3. 전선 준비: Ensure wires are straight and stripped according to the strip gauge.
4. 접지선을 연결하십시오: Connect the bare copper or green ground wire from the wall box to the green terminal screw on the Leviton switch. Tighten to secure.
5. 중성선 연결: Connect the white neutral wire(s) from the wall box to the silver terminal screw (marked WH) on the Leviton switch. Tighten to secure.
6. Connect Line Hot Wire: Connect the identified hot wire from the wall box to the black terminal screw (marked BK) on the Leviton switch. Tighten to secure.
7. 부하선을 연결하십시오: Connect the load wire from the wall box to the red terminal screw (marked RD) on the Leviton switch. If the red terminal has a red insulation label, ensure it is affixed. If not, use electrical tape to cover it.
8. 보안 연결: Gently tug on all connected wires to ensure they are securely fastened.
9. 마운트 스위치: Carefully push the wired switch into the wall box and secure it with the mounting screws.
10. 월플레이트 설치: 벽판을 부착합니다.
11. 복원력 : 회로 차단기를 다시 켜세요.

Video: How to Install Decora Smart 15A Switch

작동 지침

Basic Switch Operation:

Once installed and power is restored, the status light on the device will turn green. Press the top of the switch to turn the light on, and press the bottom of the switch to turn it off. The switch functions like any regular light switch for manual control.

Image: A finger is shown pressing the bottom of a white Leviton Decora Smart Wi-Fi Switch, demonstrating manual operation.

My Leviton App Control:

To unlock smart features, download the My Leviton app (available for iOS and Android). Follow the in-app setup wizard to connect your switch to your Wi-Fi network. No additional hub is required for Wi-Fi control.

Image: A smartphone displaying the My Leviton app interface, showing control options for various smart home devices, including a switch.

앱 기능:

• 원격 제어: 어디에서든 조명을 켜거나 끌 수 있습니다.
• 일정: Create time-based schedules, including sunrise/sunset, for automated lighting.
• 장면: Group multiple devices to activate with a single command (e.g., 'Movie Night' scene).
• 사용자 정의: Adjust settings like fade rates and bulb types for optimal performance.

Video: How to Use the My Leviton App

유지

The Leviton Decora Smart Wi-Fi Switch requires minimal maintenance. Periodically wipe the surface with a soft, damp cloth to keep it clean. Avoid using harsh chemicals or abrasive cleaners, as these can damage the finish. Ensure the switch plate is securely fastened to prevent dust and debris accumulation.

문제 해결

일반적인 문제 및 해결책:

• 조명이 켜지지 않거나 꺼지지 않음:
  • Verify that the power is on at the circuit breaker.
  • Ensure all wiring connections are secure and correct according to the installation instructions.
  • If the issue persists, refer to the detailed troubleshooting section in the full product manual or contact Leviton support.
• Wi-Fi Disconnection/Reconnection Issues:
  • Ensure your Wi-Fi router is functioning correctly and within range of the switch.
  • Power cycle the switch by turning off the circuit breaker for a few minutes, then turning it back on.
  • If the switch does not reliably reconnect after a power outage or router restart, check for firmware updates via the My Leviton app.
  • If problems persist, consider contacting Leviton Technical Support for advanced diagnostics.
• Status Light Behavior:
  • A solid green light indicates the switch is connected to Wi-Fi and operating normally.
  • A flashing green light indicates the switch is ready for Wi-Fi setup.
  • If the light is off or flashing red/orange, there may be a power or connection issue. Refer to the installation and setup sections.

명세서

보증

The Leviton Decora Smart Wi-Fi 15A Universal LED/Incandescent Switch is supported by a 5년 한정 보증. For details regarding warranty claims and service, please refer to the documentation included with your product or contact Leviton customer support.

지원하다

For technical assistance, troubleshooting, or any questions regarding your Leviton Decora Smart Wi-Fi Switch, please contact Leviton customer support directly. You can find contact information on the official Leviton website or within the My Leviton app.