1. 서론
This manual provides detailed instructions for the BIOS Weather Colour Weather Station, Model 386BC. This device is designed to monitor indoor and outdoor temperature and humidity, display barometric pressure, and provide a weather forecast. It also includes a calendar clock with a snooze alarm function.
Please read this manual thoroughly before operating the device to ensure correct usage and optimal performance.
2. 패키지 내용
- BIOS Weather Colour Weather Station (Main Unit)
- 무선 옥외용 센서
- Power Adapter (for Main Unit)
- 사용 설명서 (본 문서)
3. 설정
3.1 메인 유닛 전원 공급
The main unit can be powered by the included power adapter or by batteries (not included).
- 전원 어댑터 사용: Insert the small end of the power adapter into the DC IN port on the back of the main unit. Plug the other end into a standard electrical outlet. The display will illuminate.
- 배터리 사용: Open the battery compartment on the back of the main unit. Insert 3 x AAA batteries (not included) according to the polarity markings (+/-). Close the compartment. The display will illuminate.
Note: Using the power adapter is recommended for continuous display illumination. Batteries provide backup power or portable operation.
3.2 실외 센서에 배터리 설치
The outdoor sensor requires 2 x AA batteries (not included).
- 실외 센서 뒷면의 배터리 칸을 엽니다.
- Insert 2 x AA batteries according to the polarity markings (+/-).
- Close the compartment securely to ensure weather resistance.
3.3 Pairing the Outdoor Sensor
Once both units are powered, the main unit will automatically attempt to connect with the outdoor sensor. The outdoor temperature and humidity readings should appear on the main unit's display within a few minutes.
- If the outdoor readings do not appear, press and hold the "CHANNEL" or "SEARCH" button (refer to specific button labels on your unit) on the main unit to initiate a manual search for the sensor.
- Ensure the outdoor sensor is within the wireless transmission range (up to 70 meters / 230 feet) and away from major sources of interference.
3.4 배치 권장 사항
- 메인 유닛: Place the main unit indoors on a flat surface, away from direct sunlight, heat sources, and drafts, which can affect indoor temperature readings.
- 실외 센서: Mount the outdoor sensor in a shaded area, protected from direct rain and sunlight, to ensure accurate temperature and humidity readings. Avoid placing it near metal structures or large electrical appliances that could interfere with the wireless signal.
Image: The BIOS Weather Colour Weather Station main display unit and its accompanying wireless outdoor sensor. The main unit features a vibrant color display showing time, date, indoor/outdoor temperature and humidity, weather forecast, and barometric pressure. The white outdoor sensor is compact and designed for external placement.
4. 사용 설명서
4.1 디스플레이 오버view
Image: The BIOS Weather Colour Weather Station main unit displayed on a side table in a home setting. The color screen is clearly visible, showing various weather parameters and time. This illustrates a typical indoor placement for the main unit.
The main unit's color display provides the following information:
- 시간과 날짜: Current time, month, date, and weekday.
- 실내 온도 및 습도: 본체 내부 센서에서 읽은 값입니다.
- 실외 온도 및 습도: Readings transmitted wirelessly from the outdoor sensor.
- 일기 예보: Graphical icons indicating predicted weather conditions (e.g., sunny, cloudy, rainy).
- 기압: 현재 대기압.
- 문 페이즈: 현재 달의 위상을 그래프로 나타낸 것입니다.
4.2 시간 및 날짜 설정
Refer to the buttons on the back or side of your unit (commonly labeled "MODE", "SET", "+", "-").
- Press the "MODE" or "SET" button to enter time setting mode.
- 시를 나타내는 숫자가 깜빡입니다. "+" 또는 "-" 버튼을 사용하여 시간을 조정하세요.
- Press "MODE" or "SET" again to confirm the hour and move to minutes. Repeat to set minutes, year, month, and date.
- Press "MODE" or "SET" one last time to exit setting mode.
4.3 알람 설정
- From normal time display, press the "ALARM" button (or "MODE" repeatedly until alarm time is shown).
- Press and hold "ALARM" (or "SET") to enter alarm setting mode. The hour digit will flash.
- Use the "+" or "-" buttons to adjust the alarm hour and minutes.
- Press "ALARM" (or "SET") to confirm.
- To activate/deactivate the alarm, press the "ALARM" button briefly. An alarm icon will appear/disappear on the display.
- To use the snooze function, press any button (except "ALARM OFF") when the alarm sounds. The alarm will sound again after approximately 5-10 minutes.
4.4 온도 단위 선택(°C/°F)
Press the "°C/°F" button (usually located on the back or side of the main unit) to switch between Celsius and Fahrenheit temperature displays.
4.5 Barometric Pressure Unit Selection
If your unit supports multiple barometric pressure units (e.g., hPa, inHg), there will be a dedicated button or a setting within the "MODE" menu to cycle through these options.
5. 유지관리
5.1 배터리 교체
- 메인 유닛: 디스플레이에 배터리 표시등이 켜지면 AAA 배터리 3개를 교체하십시오.
- 실외 센서: When the battery indicator for the outdoor sensor appears, replace the 2 x AA batteries.
Always replace all batteries in a unit at the same time with new batteries of the same type. Dispose of old batteries responsibly.
5.2 청소
디스플레이와 유닛을 닦으세요asings with a soft, damp 천을 사용하십시오. 연마성 세제나 용제는 표면을 손상시킬 수 있으므로 사용하지 마십시오.
5.3 환경 고려 사항
- Avoid exposing the main unit to extreme temperatures, direct sunlight, or high humidity.
- Ensure the outdoor sensor is protected from direct weather elements (rain, snow, direct sun) for longevity and accurate readings.
6. 문제 해결
- 본체에 화면이 표시되지 않습니다.
- Check if the power adapter is securely plugged in or if batteries are correctly inserted and not depleted.
- 전원 콘센트가 작동하는지 확인하세요.
- Outdoor Sensor Not Connecting / No Readings:
- 실외 센서의 배터리를 교체하세요.
- Ensure the outdoor sensor is within the 70m (230ft) wireless range of the main unit.
- Reduce obstacles between the sensor and main unit (e.g., thick walls, metal objects).
- Press and hold the "CHANNEL" or "SEARCH" button on the main unit to re-establish connection.
- Avoid placing the sensor near sources of electromagnetic interference (e.g., TVs, computers, microwaves).
- 온도/습도 측정값 부정확:
- 두 제품 모두 직사광선, 열원 또는 바람이 닿지 않는 곳에 설치하십시오.
- Allow sufficient time (at least 30 minutes) for the sensors to stabilize after initial setup or relocation.
- 일기예보가 부정확합니다:
- The weather forecast is based on barometric pressure changes and is an estimation. It may not always perfectly match local weather service forecasts.
- Allow 24-48 hours for the station to calibrate to local atmospheric pressure.
7. 사양
| 특징 | 세부 사항 |
| 모델 번호 | 기원전 386년 |
| 실내 온도 범위 | 0°C to 50°C (32°F to 122°F) (Typical, not explicitly stated but standard for indoor units) |
| 실외 온도 범위 | -40°C ~ 70°C (-40°F ~ 158°F) |
| 실외 습도 범위 | 1% to 99% RH (Typical, not explicitly stated but standard) |
| 무선 전송 범위 | 야외에서 최대 70미터(230피트) |
| 메인 유닛 전원 | Power Adapter (included) or 3 x AAA batteries (not included) |
| 야외 센서 전원 | AA 배터리 2개(포함되지 않음) |
| 특별 기능 | Colour Display, Calendar Clock, Snooze Alarm, Barometric Pressure, Moon Phase, Wireless |
| 제품 치수 | 15.24 x 3.5 x 11.2cm |
| 무게 | 453.59g |
| 제조업체 | 써머 주식회사 |
| 원산지 | 중국 |
8. 보증 정보
The BIOS Weather Colour Weather Station Model 386BC is covered by a manufacturer's warranty. For specific details regarding warranty duration, coverage, and claims process, please refer to the warranty card included with your product or visit the official Bios web대지.
9. 고객 지원
Should you encounter any issues or have questions not covered in this manual, please contact Bios customer support. Contact information can typically be found on the product packaging, the manufacturer's web사이트나 보증서를 참조하세요.
추가 지원을 받으려면 다음을 방문하세요. www.biosmedical.com
