소개
Thank you for choosing the Steinel RS 16 LED Ceiling Light. This advanced indoor luminaire features an integrated 360-degree high-frequency motion sensor, providing reliable and automated lighting for various indoor spaces. Designed for energy efficiency and convenience, the RS 16 LED offers a luminous flux of 930 lumens with a low power consumption of just 9.5 watts, potentially saving up to 90% on electricity costs compared to traditional lighting.
Its simple, round design with a PMMA plastic cover ensures ambient light diffusion, making it ideal for hallways, entrance areas, and stairwells. This manual will guide you through the installation, operation, and maintenance of your new Steinel RS 16 LED light.
Figure 1: Steinel RS 16 LED Ceiling Light in a hallway setting.
설정 및 설치
Before beginning installation, ensure the main power supply is switched off to prevent electrical hazards. Installation should be performed by a qualified electrician in accordance with local wiring regulations.
패키지 내용:
- 1 x Steinel RS 16 LED Indoor Luminaire with LED system
- 1 x Mounting accessories (screws, wall plugs)
장착 단계:
- 장착 표면 준비: Choose a suitable location on the ceiling or wall. Ensure the surface is flat and stable.
- 드릴링 지점 표시: Use the mounting plate of the luminaire as a template to mark the drilling points on the surface.
- 드릴 구멍: 표시된 위치에 구멍을 뚫고 제공된 벽 플러그를 삽입하십시오.
- 배선 연결: Connect the electrical wires from the ceiling/wall to the luminaire's terminal block. Ensure correct polarity (Live, Neutral, Earth).
- 조명기구를 단단히 고정하십시오: Attach the luminaire to the mounting surface using the provided screws.
- 디퓨저 부착: Securely fasten the PMMA plastic diffuser cover to the luminaire body.
Figure 2: Technical drawing with dimensions (280mm diameter, 110mm depth) and mounting points.
Figure 3: The RS 16 LED light illuminating a staircase.
작동 지침
The Steinel RS 16 LED features a high-frequency motion sensor that detects movement across a 360-degree area, even through glass, wood, and light walls. This allows the light to activate automatically before you even enter the room.
설정 조정:
The following settings can be adjusted using a small slotted screwdriver on the control dials located on the luminaire's base (refer to the product diagram for exact location):
- Reach/Range: Adjust the detection range from approximately 3 meters to 8 meters in diameter. This controls how far the sensor detects movement.
- Twilight Setting (Lux): Set the ambient light level at which the sensor becomes active. This can be adjusted from 2 lux (dark) to 2000 lux (daylight). The light will only activate when the ambient light falls below this set threshold.
- 조명 지속 시간: Determine how long the light remains on after motion is detected and no further motion is registered.
Networking Feature:
The RS 16 LED supports networking with up to 10 other compatible Steinel indoor luminaires. This feature allows multiple lights to switch on simultaneously when motion is detected by any networked unit, providing seamless illumination for long corridors, large stairwells, or open-plan areas.
Figure 4: Key features and specifications of the RS 16 LED.
유지
The Steinel RS 16 LED is designed for long-term, low-maintenance operation. The integrated LED system has an average lifespan of 50,000 hours, reducing the need for frequent bulb replacements.
청소:
To clean the luminaire, gently wipe the surface with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the plastic cover or electronic components. Ensure the power is off before cleaning.
광원 교체:
This product contains a light source. Luminaires containing light sources can be disassembled to separately verify the contained light source(s). This product contains a light source of energy efficiency class E. For any issues with the integrated LED system, please contact Steinel customer support or a qualified electrician.
문제 해결
If you encounter issues with your Steinel RS 16 LED light, please refer to the following common problems and solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 조명이 켜지지 않습니다. | No power supply, twilight setting too high, sensor range too low. | Check power connection. Adjust twilight setting to a lower lux value. Increase sensor range. |
| 표시등이 계속 켜져 있습니다. | Continuous motion in detection area, lighting duration set too long, faulty sensor. | Ensure no constant motion. Reduce lighting duration. If problem persists, contact support. |
| 움직임이 없는데도 불이 켜집니다. | Sensor sensitivity too high, environmental factors (e.g., drafts, small animals). | Reduce sensor range/sensitivity. Ensure proper installation away from strong air currents. |
| 빛이 깜박입니다. | 전원 공급이 불안정하고 배선이 헐거워졌습니다. | Check electrical connections. Consult an electrician if power supply is unstable. |
If these solutions do not resolve the issue, please contact Steinel customer support.
명세서
| 특징 | 세부 사항 |
|---|---|
| 상표 | 슈타이넬 |
| 모델 번호 | 008383 |
| 치수(길이 x 너비 x 높이) | 28 x 28 x 11cm |
| 무게 | 380그램 |
| IP 등급 | IP44 |
| 스타일 | Detector, LED, PMMA plastic cover |
| 색상 | 하얀색 |
| 재료 | 플라스틱 |
| 권tage | 230 볼트 |
| 특별 기능 | 동작 탐지기 |
| 전구 유형 | LED (일체형) |
| 광속 | 930 lm |
| 전력 소비 | 9.5 와트 |
| 색온도 | 4000 켈빈 (중성 백색) |
| 연색지수(CRI) | 80 |
| 평균 수명 | 50,000시간 |
| 센서 유형 | High-frequency 360° presence sensor |
| 감지 범위 | 3-8 meters (diameter) |
| 황혼녘 풍경 | 2-2000 럭스 |
| 설치 유형 | 천장 장착 |
| 용법 | 실내 |
보증
Steinel provides a 3-year manufacturer's warranty for the RS 16 LED Ceiling Light. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, please visit the official Steinel web사이트를 방문하거나 고객 서비스에 문의하세요.
지원하다
For further assistance, technical support, or to inquire about spare parts, please contact Steinel customer service. You can find contact information on the official Steinel web사이트 또는 지역 소매점을 통해 구매하세요.
슈타이넬 GmbH
Web대지: www.steinel.de
