매뉴얼+

우르메 1705/82

URMET Artico Bracket for 2GO! System

Model: 1705/82 - Instruction Manual

1. 서론

This manual provides detailed instructions for the installation, usage, and maintenance of the URMET Artico Bracket, model 1705/82. This bracket is specifically designed to integrate with the URMET 2GO! system, providing a secure and stable mounting solution for compatible devices.

Please read this manual carefully before proceeding with installation to ensure proper setup and safe operation.

2. 안전 정보

  • Always disconnect power to the installation area before beginning any work.
  • 전기적 위험을 예방하기 위해 모든 연결 부분이 안전하고 적절하게 절연되어 있는지 확인하세요.
  • 설치에 적합한 도구를 사용하십시오.
  • 설치 과정 중 확실하지 않은 부분이 있으면 자격을 갖춘 전기 기술자나 기사에게 문의하십시오.
  • 제품을 어린이의 손이 닿지 않는 곳에 보관하세요.

3. 패키지 내용

패키지에 모든 구성 요소가 들어 있는지 확인하세요.

  • 1 x URMET Artico Bracket (Model 1705/82)
  • Mounting screws and wall plugs (quantity may vary)
  • 이 사용 설명서

4. 설정 및 설치

The URMET Artico Bracket 1705/82 is designed for easy installation. Follow these steps carefully:

  1. 장착 위치 선택: Select a suitable, stable surface for mounting the bracket. Ensure there is enough space for the device that will be attached to the bracket and that the location allows for proper wiring if applicable.
  2. 드릴링 지점 표시: Hold the bracket against the chosen surface and use a pencil to mark the positions for the mounting screws. Ensure the bracket is level before marking.
  3. 드릴 구멍: Using an appropriate drill bit for your wall type, drill holes at the marked positions. The depth and diameter of the holes should match the provided wall plugs.
  4. 벽면 플러그 삽입: Insert the wall plugs into the drilled holes until they are flush with the surface.
  5. 브래킷을 고정합니다: Align the bracket with the wall plugs and insert the mounting screws. Tighten the screws firmly until the bracket is securely fastened to the wall. Do not overtighten.
  6. Attach 2GO! System Device: Once the bracket is securely mounted, attach the compatible URMET 2GO! system device to the bracket according to the device's specific instructions. Ensure it clicks or locks into place if designed to do so.
Image showing the URMET Artico Bracket 1705/82 being mounted to a wall with screws.

Figure 1: Illustration of the URMET Artico Bracket 1705/82 during installation, showing screw points.

5. 사용

The URMET Artico Bracket 1705/82 serves as a dedicated mounting accessory for specific components of the URMET 2GO! system. Once installed, it provides a stable and secure base for the intended device. Ensure that the device is correctly seated and secured onto the bracket as per its own manual.

The bracket itself does not require any operational steps; its function is purely structural support.

6. 유지관리

The URMET Artico Bracket 1705/82 requires minimal maintenance.

  • 청소: Periodically wipe the bracket with a soft, dry cloth to remove dust. Do not use abrasive cleaners or solvents.
  • 점검: Occasionally check the mounting screws to ensure they remain tight. If the bracket appears loose, gently tighten the screws.
  • 손상: If the bracket shows signs of damage or wear, it should be replaced immediately to ensure the safety and stability of the mounted device.

7. 문제 해결

Most issues related to the Artico Bracket are installation-related.

  • 브래킷이 헐거워졌습니다:
    • 장착 나사가 완전히 조여졌는지 확인하십시오.
    • Verify that the wall plugs are correctly seated and appropriate for the wall material.
    • If the wall material is weak, consider using stronger wall anchors or relocating the bracket.
  • Device Does Not Fit on Bracket:
    • Confirm that the device you are trying to mount is compatible with the URMET Artico Bracket 1705/82 and the 2GO! system.
    • Check for any obstructions or incorrect alignment during attachment.

8. 사양

모델 1705/82
상표 우르멧
제품 유형 Bracket for 2GO! System (Accessory for Intercom/Domestic Lighting)
무게 약 4.54그램
재료 Durable plastic or metal composite (specific material not provided)

9. 보증 정보

URMET products are covered by a standard manufacturer's warranty. For specific details regarding the warranty period and terms for the Artico Bracket 1705/82, please refer to the warranty card included with your purchase or visit the official URMET web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.

10. 고객 지원

If you have any questions, require technical assistance, or need to report a problem with your URMET Artico Bracket 1705/82, please contact URMET customer support. Contact information can typically be found on the official URMET web사이트 또는 제품 포장에 표시되어 있습니다.

Official URMET Web대지: www.urmet.com

11. 제품 비디오

No official product videos specifically detailing the installation or features of the URMET Artico Bracket 1705/82 were found from the seller. Please refer to the written instructions and diagrams provided in this manual for guidance.

관련 문서 - 1705/82

사전view Installationshandbuch für URMET Namensverzeichnismodul Mod. 1168/51
Umfassendes Installationshandbuch für das URMET Namensverzeichnismodul (Modell 1168/51 und 1168/51G) für Alpha-Rufmodule. Enthält technische Spezifikationen, Anschlussdiagramme und Wartungshinweise.
사전view ZJEDNODUŠENÝ NÁVOD: ZAPOJENÍ SYSTÉMU URMET 1736
Zjednodušený návod pro zapojení a konfiguraci systémů videovrátných a audio vrátných URMET řady 1736. Obsahuje základní schéma zapojení Soupravy 1736/501, paralelní zapojení více videotelefonů a příklad rozšíření systému s více tlačítky a byty. 올바른 DIP 설정에 대한 정보를 제공합니다.
사전view Manual del Sistema Urmet 2Voice: Instalación y Operación
Urmet 2Voice의 비디오 포트 시스템, 설치, 구성, 문자 및 기능을 모두 완료했습니다. 교육용 통신 시스템을 구성하고 시스템을 구성합니다.
사전view Urmet VOG5(IP) 핸즈프리 모니터: 시작 가이드
Urmet VOG5(IP) 핸즈프리 모니터에 대한 빠른 시작 가이드로, 전화 응답, 문/게이트 열기, 알림 관리, 설정 사용자 지정 등에 대한 비디오 튜토리얼을 제공합니다.
사전view Urmet 1140/1 Signo 전자 호출 시스템 설치 및 배선
Urmet 1140/1 Signo 전자식 인터콤 시스템을 설치하고 배선하기 위한 자세한 가이드로, 다양한 구성에 대한 단자 연결 및 배선 다이어그램이 포함되어 있습니다.
사전view Urmet Signo 1740 비디오 도어폰 사용 설명서
Urmet Signo 1740 비디오 도어폰 시스템 사용 설명서에는 기능, 통화 처리, 버튼 기능, 벨소리 선택 등에 대한 자세한 설명이 나와 있습니다.