1. 서론
This manual provides essential information for the safe and efficient operation of your Legrand UPS Whad Online HE 1 KVA. An Uninterruptible Power Supply (UPS) is designed to protect electronic equipment from power outages, surges, and other electrical disturbances, ensuring continuous power and safeguarding your data and hardware. Please read this manual thoroughly before installation and use, and retain it for future reference.
2. 안전 정보
부상 및 UPS 또는 연결된 장비의 손상을 방지하기 위해 다음 안전 수칙을 준수하십시오.
- 전기 안전: The UPS operates with high voltages. Do not open the UPS casing. 모든 서비스는 자격을 갖춘 담당자에게 의뢰하세요.
- 접지: Always connect the UPS to a grounded AC power outlet.
- 환경: Install the UPS indoors in a well-ventilated area, away from direct sunlight, heat sources, moisture, and flammable materials.
- 통풍: UPS 주변에 적절한 공기 흐름이 확보되도록 하십시오. 통풍구를 막지 마십시오.
- 배터리 취급: Batteries contain hazardous materials. Do not dispose of batteries in a fire. Follow local regulations for battery disposal.
- 초과 적재: Do not connect appliances that exceed the UPS's rated capacity.
3. 패키지 내용
상자를 조심스럽게 풀고 모든 품목이 들어 있는지 확인하세요.
- Legrand UPS Whad Online HE 1 KVA Unit
- 전원 입력 케이블
- Computer Accessories (e.g., USB cable for monitoring, output power cables)
- 사용 설명서 (본 문서)
누락되거나 손상된 품목이 있는 경우 즉시 판매점에 연락하십시오.
4. 제품 오버view
The Legrand UPS Whad Online HE 1 KVA is designed for reliable power protection. Below is a general representation of the unit.
그림 4.1: 앞쪽 view of the Legrand UPS Whad Online HE 1 KVA. This image shows the main casing of the UPS, typically featuring the control panel, display, and possibly some front-facing ports or indicators.
The UPS typically features a front panel with an LCD display or LED indicators to show operational status, battery level, and various alerts. The rear panel includes AC input, output receptacles, communication ports (e.g., USB, RS-232), and possibly an emergency power off (EPO) port.
5. 설정
초기 설정을 위해 다음 단계를 따르세요.
- 놓기: Place the UPS on a flat, stable surface in a clean, dry, and well-ventilated indoor environment. Ensure there is sufficient space around the unit for proper heat dissipation.
- 초기 충전: Connect the UPS to a grounded AC power outlet using the provided power input cable. Allow the UPS to charge for at least 8 hours before connecting any equipment to ensure optimal battery performance. The UPS will charge whether it is turned on or off.
- 연결 장비: After initial charging, connect your computer and other critical electronic devices to the UPS output receptacles. Ensure the total load does not exceed the UPS's rated capacity (1000 Watts).
- Communication Port (Optional): If desired, connect the UPS to your computer using the provided USB or serial cable to enable power management software features.
6. 사용 설명서
Powering On the UPS:
- Press and hold the power button on the front panel for a few seconds until you hear a beep and the display illuminates.
- The UPS will perform a self-test and then enter online mode, providing conditioned power to connected devices.
Powering Off the UPS:
- First, shut down all connected equipment gracefully.
- Press and hold the power button on the front panel for a few seconds until the display turns off.
- Disconnect the UPS from the AC power outlet if it will not be used for an extended period.
지표 이해하기:
Refer to the UPS display or LED indicators for current status:
- 온라인 모드: UPS is providing utility power to connected devices and charging the battery.
- 배터리 모드: UPS is providing power from its internal battery due to a power outage.
- 배터리 부족: Indicates the battery charge is critically low.
- Fault/Overload: Indicates an internal error or excessive load.
7. 유지관리
Regular maintenance ensures the longevity and optimal performance of your UPS:
- 청소: UPS를 깨끗하고 먼지 없이 유지하십시오. 외부를 닦을 때는 마른 천을 사용하십시오. 액체 세척제나 용제를 사용하지 마십시오.
- 배터리 관리 : The internal batteries are designed for a specific lifespan. If the UPS consistently fails to provide adequate backup time, the batteries may need replacement. Contact Legrand support or a qualified technician for battery replacement.
- 저장: If storing the UPS for an extended period, ensure it is fully charged, then disconnect it from the AC outlet. Recharge the UPS every 3-6 months to prevent battery discharge.
8. 문제 해결
이 섹션에서는 다음과 같은 일반적인 문제에 대해 설명합니다.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| UPS가 켜지지 않습니다. | AC 입력 전원 없음; 배터리 부족; UPS 오류 | Check AC power connection; Allow UPS to charge for 8 hours; Contact support if fault persists. |
| UPS는 배터리 모드로 자주 전환됩니다. | Unstable utility power; High sensitivity setting | Check utility power quality; Adjust UPS sensitivity via software (if available). |
| 짧은 백업 시간 | Overload; Old battery; Insufficient charging | Reduce connected load; Replace battery; Ensure full charge before use. |
| 과부하 경보 | 너무 많은 기기가 연결되었습니다 | Disconnect non-essential equipment until the alarm clears. |
If the problem persists after attempting these solutions, contact Legrand technical support.
9. 사양
Technical specifications for the Legrand UPS Whad Online HE 1 KVA (Model 310164):
| 특징 | 사양 |
|---|---|
| 상표 | 르그랑 |
| 모델 번호 | 310164 |
| 제품 치수 | 40.01 x 40.01 x 15.01cm |
| 품목 무게 | 10g |
| 왓tage | 1000 와트 |
| 최대 전력 | 1000 와트 |
| 입력 Voltage | 230볼트(AC) |
| 배터리 셀 구성 | 리튬 이온 |
| 색상 | 회색, 검정색 |
10. 보증 및 지원
보증 정보는 제품에 동봉된 보증 카드를 참조하시거나 르그랑 공식 웹사이트를 방문하십시오. website. If you require technical assistance, troubleshooting beyond this manual, or have questions regarding your Legrand UPS, please contact Legrand customer support through their official channels.