Audio-Technica VM510CB Dual Moving Magnet Conical Stereo Turntable Cartridge

소개

The Audio-Technica VM510CB is a dual moving magnet stereo turntable cartridge designed for accurate sound reproduction. It features a 0.6 mil conical bonded stylus, engineered to track the center of the record groove for reliable performance and high fidelity. This cartridge is part of Audio-Technica's VM cartridge line, incorporating advanced technology for optimal channel separation and extended frequency response. This manual provides essential information for the proper installation, operation, and maintenance of your VM510CB cartridge.

주요 특징

• Dual Magnet Design: Matches left and right channels in the stereo record groove for superior channel separation and extended frequency response.
• Conical Bonded Stylus: A 0.6 mil conical bonded stylus ensures reliable tracking and excellent fidelity.
• Paratoroidal Coils: Engineered to improve generating efficiency.
• Center Shield Plate: Reduces crosstalk between the left and right channels.
• 내구성이 뛰어난 하우징: Constructed with low-resonance polymer for enhanced sound quality.
• Aluminum Cantilever: Provides robust support for the stylus.
• 장착 하드웨어: Includes necessary hardware for installation.

설정 및 설치

Proper installation of the VM510CB cartridge is crucial for optimal performance. Please follow these steps carefully. If you are unsure about any step, consult a qualified audio technician or your turntable's instruction manual.

1. 개봉 및 검사

Carefully remove the cartridge from its packaging. Inspect the stylus for any visible damage. Avoid touching the stylus tip directly.

Image: The VM510CB cartridge viewed from a top-front angle, showing the blue body and gold pins.

2. 카트리지 장착

1. 턴테이블의 전원이 꺼져 있고 플러그가 뽑혀 있는지 확인하십시오.
2. If replacing an existing cartridge, carefully remove it from the headshell. Note the wiring connections.
3. Attach the VM510CB cartridge to your turntable's headshell using the supplied mounting hardware (screws and nuts). Do not overtighten the screws initially, as you may need to adjust the cartridge position for alignment.
4. Connect the headshell wires to the corresponding pins on the cartridge. The standard color code is:
   • White (L+): Left channel hot
   • Blue (L-): 왼쪽 채널 접지
   • Red (R+): Right channel hot
   • Green (R-): 오른쪽 채널 접지

Image: The VM510CB cartridge viewed from a side-front angle, showing the blue body, clear stylus guard, and gold connection pins.

3. 카트리지 정렬

Accurate alignment is critical for optimal sound quality and to prevent record wear. This typically involves setting overhang, azimuth, and vertical tracking angle (VTA).

• 위에 걸리다: Use an alignment protractor (often supplied with your turntable or available separately) to position the cartridge correctly in the headshell. Adjust the cartridge forward or backward until the stylus tip aligns with the designated points on the protractor.
• 방위각: 카트리지 본체가 레코드 표면과 평행한지 확인하십시오. viewed from the front. Some headshells allow for azimuth adjustment.
• Vertical Tracking Angle (VTA): The tonearm should be parallel to the record surface when the stylus is resting in a groove. Adjust the tonearm height if your turntable allows.
• Once aligned, carefully tighten the mounting screws.

4. Setting Tracking Force

The recommended tracking force for the VM510CB is typically between 1.8 to 2.2 grams. Refer to your turntable's manual for instructions on how to set the tracking force using the tonearm counterweight. An accurate stylus force gauge is recommended for precise adjustment.

5. 안티스케이트 설정

Set the anti-skate (or bias) control on your turntable to match the tracking force. This helps prevent the stylus from being pulled towards the center of the record.

작업

Once installed and properly adjusted, operating the VM510CB cartridge involves standard turntable usage procedures.

1. Ensure your turntable is connected to a phono preamp리퍼 또는 amp포노 입력 단자가 있는 앰프.
2. Place a record on the platter and ensure it is clean.
3. Carefully lower the tonearm onto the record's lead-in groove using the tonearm lift mechanism. Avoid dropping the tonearm directly onto the record.
4. At the end of the record, use the tonearm lift to raise the tonearm and return it to its rest.
5. Always engage the stylus guard when the turntable is not in use or when moving the turntable to protect the stylus.

이미지: 자세한 view of the VM510CB cartridge, highlighting the conical stylus tip with a magnified inset.

유지

Regular maintenance ensures the longevity and optimal performance of your VM510CB cartridge.

• 스타일러스 청소: Clean the stylus regularly using a soft stylus brush, brushing gently from back to front (in the direction of play). Never brush from side to side or front to back, as this can damage the stylus. Specialized stylus cleaning fluids can also be used sparingly.
• 기록 정리: Always play clean records. Dust and debris on records can accumulate on the stylus, degrading sound quality and potentially damaging both the stylus and your records.
• 스타일러스 교체: The stylus is a delicate component that wears down over time. The lifespan of a stylus varies depending on usage and record condition, but typically ranges from 500 to 1000 hours of play. A worn stylus can damage records and degrade sound quality. Replace the stylus with an Audio-Technica VMN10CB replacement stylus when wear is evident or after the recommended playing hours.
• 카트리지 본체 세척: Use a soft, dry cloth to wipe the cartridge body if it becomes dusty. Avoid using harsh chemicals.

이미지: 클로즈업 view of the VM510CB cartridge's conical stylus tip, showing its precise shape.

문제 해결

If you encounter issues with your VM510CB cartridge, consider the following common problems and solutions:

• 소리가 안 나거나 아주 약하게 들림:
  • Check all connections from the cartridge to the headshell, tonearm, and amplifier. Ensure they are secure and correctly wired (L+/L-, R+/R-).
  • 귀하의 것을 확인하십시오 amplifier's input is set to "Phono" and that your phono preamp(외부 앰프인 경우) 전원이 켜져 있습니다.
  • Inspect the stylus for damage or excessive dirt.
• Distorted Sound or Poor Tracking:
  • Re-check the tracking force. It should be within the recommended range (1.8-2.2g).
  • Verify cartridge alignment (overhang, azimuth, VTA).
  • Clean the stylus. A dirty or worn stylus can cause distortion.
  • Ensure records are clean and free of debris.
  • Check anti-skate setting.
• 윙윙거리는 소리 또는 웅웅거리는 소음:
  • 턴테이블의 접지선이 전원 콘센트에 제대로 연결되어 있는지 확인하십시오. amp앰프의 접지 단자.
  • Check for loose connections in the headshell wiring.
  • 턴테이블을 간섭을 일으킬 수 있는 다른 전자 기기에서 멀리 떨어뜨려 놓으십시오.
• 건너뛰기:
  • Increase tracking force slightly within the recommended range.
  • Inspect the stylus for damage or excessive dirt.
  • Ensure the record is flat and clean.
  • Check anti-skate setting.

명세서

보증 및 지원

보증 정보 및 기술 지원에 대해서는 공식 Audio-Technica를 참조하십시오. web해당 사이트를 방문하거나 고객 서비스 부서에 문의하세요. 구매 증빙 자료로 구매 영수증을 보관하세요.

온라인 지원: 오디오테크니카 지원