Sena Tufftalk Hard Hat Mount Earmuff User Manual

소개

The Sena Tufftalk Hard Hat Mount Earmuff is designed for clear, long-range Bluetooth communication in noisy environments. It integrates advanced noise control and hearing protection with wireless communication capabilities, allowing users to maintain situational awareness while communicating effectively. This manual provides instructions for setup, operation, and maintenance of your Tufftalk device.

패키지 내용

계속하기 전에 모든 구성 요소가 있는지 확인하세요.

• Tufftalk Hard Hat Mount Earmuff with Long-Range Bluetooth Communication
• 듀얼 배터리 충전기
• Rechargeable Battery 1100 (2 included)
• USB 전원 및 데이터 케이블(마이크로 USB 타입)
• Microphone Sponges (5pcs)
• Tufftalk Replacement Ear Pads Kit (2 included)
• 터프톡 배터리 커버
• Tufftalk Antennas
• Tufftalk Hard Hat Mount Bracket

설정

1. 초기 충전

Before first use, fully charge the Tufftalk battery. Connect the USB Power & Data Cable to the Dual Battery Charger, then plug the charger into a power source. Insert the rechargeable battery into the charger. A full charge takes approximately 2.5 hours. The battery can also be charged while installed in the earmuff.

2. 안전모 장착

Attach the Tufftalk earmuff to a compatible hard hat using the provided Tufftalk Hard Hat Mount Bracket. Ensure the earmuff is securely fastened and positioned for comfortable use and optimal hearing protection.

Image: Sena Tufftalk Hard Hat Mount Earmuff. This image displays the black earmuff unit with its hard hat mounting brackets and attached microphone boom.

3. 안테나 설치

Install the appropriate antenna for your communication needs. The default antenna provides a range of 800 meters, while an optional long antenna can extend the range up to 1.4 kilometers.

4. 전원 켜기 / 끄기

• 전원을 켜려면: Press and hold the Power Button until the LED indicator illuminates.
• 전원을 끄려면: LED 표시등이 꺼질 때까지 전원 버튼을 길게 누르세요.

작동 지침

1. 블루투스 페어링

To pair the Tufftalk with a Bluetooth-enabled device (e.g., smartphone, other Tufftalk units):

1. Ensure the Tufftalk is powered off.
2. Press and hold the Phone Button and the (+) Button simultaneously for 5 seconds until the LED flashes red and blue, indicating pairing mode.
3. On your Bluetooth device, search for "Sena Tufftalk" and select it to pair.
4. 페어링이 완료되면 LED가 파란색으로 깜박입니다.

2. 인터콤 통신

The Tufftalk supports four-way intercom communication. For optimal performance, ensure all units are within range and properly paired.

• 인터콤 시작하기: Briefly press the Intercom Button on your unit.
• 인터콤 종료: 인터콤 버튼을 다시 잠깐 누르세요.
• 유니버설 인터콤: The Tufftalk can connect with non-Sena Bluetooth headsets using Universal Intercom mode. Refer to the full user guide on the Sena web자세한 지침은 사이트를 참조하십시오.

3. 대기 모드

The Ambient Mode feature allows you to hear important external sounds while still benefiting from hearing protection. This increases situational awareness.

• Activating Ambient Mode: Press the Ambient Mode Button.
• Deactivating Ambient Mode: Press the Ambient Mode Button again.

4. Advanced Noise Control

Sena's Advanced Noise Control technology filters out external noise, ensuring clear audio for both incoming and outgoing communication. This feature operates automatically.

5. Two-Way Radio Connection

The Tufftalk can be connected to a two-way radio for additional communication options. Specific connection methods may vary depending on the radio model. Consult the full user guide for detailed instructions.

유지

• 청소: Wipe the earmuff and microphone with a soft, damp 옷감. 가혹한 화학 물질이나 연마성 세제를 사용하지 마십시오.
• 이어패드 교체: The Tufftalk Replacement Ear Pads Kit is included for periodic replacement to maintain comfort and acoustic seal. Follow the instructions provided with the kit for proper installation.
• 마이크용 스폰지: Replace microphone sponges as needed to ensure clear voice transmission and hygiene.
• 배터리 관리 : Store the device in a cool, dry place. If storing for extended periods, charge the battery every few months to prevent deep discharge.

문제 해결

• 전원 없음: Ensure the battery is fully charged and correctly inserted. Try charging the unit for at least 30 minutes.
• 오디오 없음/오디오 품질이 좋지 않음:
  • Check volume levels on both the Tufftalk and the connected device.
  • Ensure the microphone is properly positioned and the sponge is intact.
  • Verify Bluetooth connection. If necessary, re-pair the devices.
  • Confirm Advanced Noise Control is functioning.
• 인터콤 연결 끊김:
  • Ensure units are within the specified intercom range.
  • Re-establish the intercom connection by pressing the Intercom Button.
  • Check for obstructions or strong interference sources.
• 블루투스 페어링 문제:
  • Ensure the Tufftalk is in pairing mode (LED flashing red and blue).
  • Delete previous pairings from your device's Bluetooth list and attempt to pair again.
  • Restart both the Tufftalk and the Bluetooth device.

명세서

지원하다

For further assistance, detailed user manuals, firmware updates, and warranty information, please visit the official Sena web대지:

www.sena.com

Please note that specific warranty terms and conditions may apply and are available on the manufacturer's web대지.