Keeley Dark Side Fuzz Mod Workstation 페달 사용 설명서

1. 이상view

The Keeley Dark Side Fuzz Mod Workstation Pedal is a versatile multi-effects unit designed for guitarists seeking a comprehensive palette of tones. It integrates three distinct effect types: Fuzz, Delay, and Modulation. This pedal is engineered to provide a transparent Big Fuzz, a selection of 12 multi-head tape-style delays, and various modulation effects including Flanger, Rotary Speaker Cabinet, U-Vibe, and Phaser. Its design allows for extensive sound shaping, making it a powerful tool for creative expression.

그림 1: 상단 view of the Keeley Dark Side Fuzz Mod Workstation Pedal.

2. 특징

• Fuzz Section: Engineered for a transparent Big Fuzz tone, reminiscent of classic transistor-based fuzzes.
• 지연 구간: Features 12 distinct multi-head tape-style syncopated delays.
• 변조 섹션: Offers a selection of Flanger, Rotary Speaker Cabinet, U-Vibe, and Phaser effects.
• Expression Pedal Port: Allows for external control over certain parameters, enhancing real-time manipulation.
• Effect Order Switch: Provides flexibility to change the signal path order of the Fuzz and Modulation/Delay sections.
• 전력 요구 사항: Operates on 9VDC Center Negative power supply.

3. 제어 및 연결

Familiarize yourself with the pedal's controls and connections as illustrated below.

Figure 2: Labeled diagram of the Keeley Dark Side Pedal controls.

제어 설명:

Side Panel Connections:

그림 3: 측면 view showing input, output, and expression pedal jacks.

• 입력(입력): 기타 또는 이전 이펙트 페달의 출력 단자를 여기에 연결하세요.
• 출력(출력): 이것을 당신의 것에 연결하세요 amplifier's input or the input of the next effect pedal.
• Expression (EXP): Connect a TRS expression pedal for real-time control of selected parameters.
• 9VDC 입력: Connect a regulated 9VDC center-negative power supply.

4. 설정

1. 전원 연결: Connect a standard 9VDC center-negative power supply (not included) to the 9VDC input jack on the pedal. Ensure the power supply meets the specified voltag손상을 방지하기 위해 전기장 및 극성 요구 사항을 준수해야 합니다.
2. 입력 연결: Connect your guitar or the output of your last pedal in the signal chain to the 'IN' jack on the pedal using a standard 1/4-inch instrument cable.
3. 출력 연결: 페달의 'OUT' 잭을 컴퓨터에 연결하세요. amplifier's input or the input of the next pedal in your signal chain using a standard 1/4-inch instrument cable.
4. 익스프레션 페달(선택 사항): If using an expression pedal, connect it to the 'EXP' jack using a TRS cable.
5. 초기 설정: Before powering on, set all knobs to their middle positions and ensure both footswitches are disengaged (LEDs off).

5. 운영

5.1 Fuzz Section

• Engaging Fuzz: Press the FUZZ footswitch to activate the fuzz effect. The corresponding LED will illuminate.
• 퍼즈 노브: Adjusts the amount of fuzz gain. Higher settings produce more saturation and sustain.
• 필터 조절 노브: Shapes the tone of the fuzz. Experiment with this knob to find your desired frequency response, from darker to brighter tones.
• FUZZ Toggle Switch: Selects between three distinct fuzz voicings:
  • 평평한: A balanced, full-range fuzz tone.
  • 국자: Scoops the mid-range frequencies, often used for a classic Big Muff-style sound.
  • 가득한: Boosts the low-end and overall output for a thicker, more powerful fuzz.
• FUZZ Level Knob: Controls the overall output volume of the fuzz effect.

5.2 Modulation and Delay Section

• Engaging Mod/Delay: Press the MOD footswitch to activate the modulation or delay effect. The corresponding LED will illuminate.
• DELAY/MOD Switch: Toggles between Delay and Modulation modes.
• MOD Level Knob: Controls the overall output volume of the modulation or delay effect.

지연 모드:

• BLEND/TAPE HEAD Knob: In Delay mode, this knob selects one of 12 multi-head tape delay programs. Each program offers a unique rhythmic pattern of repeats. Refer to the Tape Head Matrix for details.
• DEPTH/TIME Knob: Adjusts the delay time, from short slap-back echoes to long, ambient repeats.
• RATE/FDBK Knob: Controls the feedback (number of repeats) of the delay. Higher settings result in more repeats.

Figure 4: Keeley Tape Head Matrix for Delay Programs.

변조 모드:

• BLEND/TAPE HEAD Knob: In Modulation mode, this knob blends the dry signal with the wet (effected) signal.
• DEPTH/TIME Knob: Adjusts the intensity or depth of the selected modulation effect.
• RATE/FDBK Knob: Controls the speed or rate of the selected modulation effect.
• 변조 유형: The pedal offers Flanger, Rotary Speaker Cabinet, U-Vibe, and Phaser. The specific modulation type is selected via internal settings or a combination of knob positions (refer to the full product manual for advanced details if available).

5.3 Expression Pedal Functionality

When an expression pedal is connected to the EXP jack, it can be assigned to control various parameters within the Modulation or Delay section, such as Delay Time, Modulation Rate, or Blend. Consult the full product manual for specific assignments and calibration instructions.

5.4 Effect Order Switch

The ORDER switch allows you to change the internal signal flow of the Fuzz and Modulation/Delay sections. This significantly impacts the overall tone and interaction between the effects:

• Fuzz First: The fuzz effect processes the signal before the modulation/delay. This is a common setup for classic fuzz tones with trailing effects.
• Mod/Delay First: The modulation/delay effect processes the signal before the fuzz. This can lead to unique and experimental sounds, where the fuzz acts on the modulated or delayed signal.

6. 유지관리

• 청소: 페달 외부를 닦을 때는 부드럽고 마른 천을 사용하세요. 연마성 세제나 용제는 사용하지 마세요.
• 저장: 페달은 직사광선과 극한의 온도를 피해 서늘하고 건조한 곳에 보관하세요.
• 힘: 페달을 장기간 사용하지 않을 때는 항상 전원 공급 장치를 분리하십시오.
• 사이: 모든 케이블 연결 부위의 마모나 손상을 주기적으로 점검하세요. 잭에 먼지나 이물질이 없는지 확인하세요.

7. 문제 해결

• 소리 없음:
  • 모든 케이블 연결 상태를 확인하십시오 (기타는 IN 단자에, OUT 단자에는...). amp).
  • 전원 공급 장치가 올바르게 연결되어 있고 정상적으로 작동하는지 확인하십시오.
  • Verify that the pedal is engaged (LEDs illuminated for active effects).
  • Check the volume knobs on the pedal, guitar, and amp리퍼.
• Fuzz Not Engaging/Working:
  • Ensure the FUZZ footswitch is pressed and its LED is on.
  • Check the FUZZ knob setting; ensure it's not at minimum.
  • Test with different cables and power supply.
  • If the MOD section works but Fuzz does not, there might be an internal issue requiring professional service.
• 과도한 소음/험:
  • Ensure you are using a regulated 9VDC center-negative power supply. Unregulated or incorrect power supplies can cause noise.
  • 설정에서 접지 루프를 확인하세요.
  • 페달을 변압기나 기타 전자기 간섭 발생원으로부터 멀리 옮기십시오.
  • 다른 케이블을 사용해 보세요.
• Effects Not Modulating/Delaying Correctly:
  • Ensure the MOD footswitch is pressed and its LED is on.
  • Verify the DELAY/MOD switch is in the desired position.
  • Adjust the DEPTH/TIME and RATE/FDBK knobs.
  • For delay, ensure the BLEND/TAPE HEAD knob is set to an active program.

8. 사양

9. 보증 및 지원

For warranty information and technical support, please refer to the official Keeley Electronics web사이트를 방문하거나 고객 서비스에 직접 문의하세요. 보증 청구를 위해 구매 증빙 자료를 보관하세요.