KabelDirekt 822 SATA III 데이터 케이블 사용자 설명서

1. 서론

This manual provides instructions for the KabelDirekt 822 SATA III data cables. These cables are designed to connect internal storage devices such as Hard Disk Drives (HDDs) and Solid State Drives (SSDs) to your computer's motherboard, facilitating high-speed data transfer.

Image 1.1: KabelDirekt 822 SATA III Data Cables. These cables are used for connecting internal storage devices to a motherboard.

2. 안전 정보

컴퓨터 구성 요소를 다룰 때는 항상 다음 안전 예방 조치를 준수하세요.

• Ensure your computer is powered off and unplugged from the wall outlet before opening the case or installing any components.
• Discharge any static electricity from your body by touching a grounded metal object (e.g., the computer case) before handling internal components.
• Handle cables by their connectors, not by the cable itself, to prevent damage.
• Avoid bending cables sharply, especially near the connectors.

3. 설정 및 설치

Follow these steps to properly install your KabelDirekt SATA III data cables:

1. 시스템 준비: Power down your computer and disconnect it from the power source. Open the computer case to access the motherboard and storage drive bays.
2. 커넥터 식별: Locate the SATA data ports on your motherboard and the SATA data ports on your HDD, SSD, or optical drive. SATA data connectors are typically L-shaped.


Image 3.1: A KabelDirekt SATA data cable connected to a storage drive. Ensure the L-shaped connector aligns correctly.

3. Connect to Storage Device: Take one end of the KabelDirekt SATA data cable and firmly insert it into the SATA data port on your storage device (HDD, SSD, or optical drive). The metal latch on the connector will secure it in place.
4. 마더보드에 연결: Take the other end of the SATA data cable and connect it to an available SATA data port on your motherboard. Ensure it is fully seated and the latch engages.


Image 3.2: A user connecting internal components. Proper cable routing helps maintain airflow.

5. 케이블 관리 : Route the cables neatly within your computer case to improve airflow and aesthetics. The flat design of these cables assists with organization.


이미지 3.3: Example of organized cable routing inside a computer case using KabelDirekt SATA cables.

6. 전원 연결: Remember that SATA data cables only transfer data. Your storage device will require a separate SATA power cable from your power supply unit (PSU) to function.
7. 케이스를 닫고 전원을 켜세요: Once all connections are secure, close your computer case, reconnect the power, and power on your system.

4. 운영

The KabelDirekt 822 SATA III data cables are designed for reliable and high-speed data transfer. Once correctly installed, they enable communication between your motherboard and connected storage devices.

• 데이터 전송 속도: These cables support the SATA III standard, offering data transfer speeds of up to 6 Gigabits per second (6Gb/s). This is ideal for maximizing the performance of modern SSDs.


Image 4.1: Detail of KabelDirekt SATA connectors, highlighting SATA III and 6 Gbit/s capabilities.

• 이전 버전과의 호환성: The cables are fully backward compatible with older SATA I (1.5Gb/s) and SATA II (3Gb/s) standards, allowing them to be used with a wide range of older storage devices and motherboards.
• 기능: The primary function is to transmit data between the storage device and the motherboard. Power for the storage device must be supplied separately via a SATA power cable from the PSU.

5. 유지관리

KabelDirekt SATA III data cables require minimal maintenance. Following these guidelines will help ensure their longevity and optimal performance:

• 연결을 안전하게 유지하세요: Periodically check that the connectors are firmly seated in both the storage device and the motherboard ports. The metal latches are designed to prevent accidental disconnections.
• 신체적 스트레스를 피하십시오: Do not pull, twist, or excessively bend the cables. While robust, extreme stress can damage internal wiring.
• 청결: If dust accumulates on the cables or connectors, gently wipe them with a dry, lint-free cloth. Ensure no moisture comes into contact with the connectors.
• 온도 및 환경: Ensure the cables are not exposed to extreme temperatures or humidity, which can degrade materials over time.

6. 문제 해결

If you encounter issues with your KabelDirekt SATA III data cables, consider the following troubleshooting steps:

• 장치가 감지되지 않음:
  • Ensure both ends of the SATA data cable are securely connected to the storage device and the motherboard.
  • Verify that the storage device is receiving power via a separate SATA power cable from the PSU.
  • Try connecting the storage device to a different SATA port on the motherboard.
  • Test with a different SATA data cable if available to rule out a faulty cable.
  • 시스템의 BIOS/UEFI 설정을 확인하여 SATA 포트가 활성화되어 있고 드라이브가 인식되는지 확인하세요.
• 데이터 전송 속도가 느림:
  • Ensure both your storage device and motherboard support SATA III (6Gb/s) speeds. If either component is older, it may operate at SATA I or II speeds.
  • Confirm the cable is properly seated. A loose connection can degrade performance.
  • Check for other system bottlenecks (e.g., CPU usage, RAM, other background processes).
• 간헐적인 연결:
  • Reseat both ends of the cable.
  • Ensure the metal latches on the connectors are fully engaged.
  • 케이블에 눈에 보이는 손상이나 꼬임이 있는지 검사하세요.

7. 사양

Key technical specifications for the KabelDirekt 822 SATA III Data Cables:

Image 7.1: A KabelDirekt SATA cable illustrating its 60 cm length.

8. 보증 및 지원

KabelDirekt products are manufactured to high quality standards. For information regarding warranty coverage and customer support, please refer to the details below:

• 제조업체 보증: This product comes with a 36-month manufacturer warranty. Please retain your proof of purchase for warranty claims.
• 고객 지원: For technical assistance, troubleshooting, or warranty inquiries, please visit the official KabelDirekt web사이트 또는 고객 서비스 부서에 문의하세요. 연락처 정보는 일반적으로 제품 포장이나 제조업체의 web대지.
• 온라인 리소스: Additional support and FAQs may be available on the KabelDirekt web대지.