Trimble 7-Pin Coil Cable ATI026047 User Manual

1. 서론

This manual provides essential information for the proper installation, operation, and maintenance of the Trimble 7-Pin Coil Cable, model 에이티026047. This cable is designed for use with various Spectra Laser Machine Control Systems, including CB30, CB52, and Apache models, facilitating reliable data and power transmission between components.

Please read this manual thoroughly before using the product to ensure safe and efficient operation and to prevent damage to the cable or connected equipment.

2. 안전 정보

Observe the following safety guidelines to prevent injury and damage to equipment:

• Always ensure power is disconnected from all equipment before connecting or disconnecting the cable.
• Inspect the cable for any signs of damage (cuts, abrasions, bent pins) before each use. Do not use a damaged cable.
• Avoid kinking, crushing, or excessively stretching the coiled cable, as this can damage internal wiring.
• Keep connectors clean and free from dirt, moisture, and debris to ensure proper electrical contact.
• Operate equipment in accordance with all manufacturer's instructions and local safety regulations.

3. 제품 오버view

The Trimble 7-Pin Coil Cable (model 에이티026047) is a robust, coiled electrical cable designed for demanding machine control environments. Its coiled design allows for flexibility and extension while minimizing excess cable length, reducing entanglement risks. It features 7-pin connectors on both ends, ensuring secure and reliable connections for power and data transfer.

Figure 3.1: Trimble 7-Pin Coil Cable (ATI026047) as received in its protective packaging. The label clearly shows the part number and manufacturing date.

Figure 3.2: The Trimble 7-Pin Coil Cable (ATI026047) fully extended, showcasing its coiled design and robust construction. Both ends feature identical 7-pin connectors.

그림 3.3: 더 자세히 view of the Trimble 7-Pin Coil Cable, highlighting the durable rubber material and the secure connection points. The coiled nature allows for flexible length adjustment.

그림 3.4: 상세 view of the male and female 7-pin connectors on the Trimble Coil Cable. Note the precise pin alignment and robust housing designed for secure mating and environmental protection.

4. 설정 및 설치

Follow these steps to properly connect the Trimble 7-Pin Coil Cable to your Spectra Laser Machine Control System components:

1. 전원 끄기 : Ensure all connected devices (e.g., CB30, CB52, Apache control box, laser receiver) are powered off before making any connections.
2. 커넥터 검사: 양쪽 끝이 잘 맞는지 확인 에이티026047 cable and the corresponding ports on your equipment are clean, dry, and free from damage.
3. 첫 번째 끝 연결: Align the 7-pin connector on one end of the coil cable with the appropriate port on your first device (e.g., laser receiver). Gently push the connector in until it seats firmly.
4. 보안 연결: Twist the locking collar on the cable connector clockwise until it is hand-tight. Do not overtighten.
5. 두 번째 끝 연결: Repeat steps 3 and 4 for the other end of the coil cable, connecting it to your second device (e.g., machine control box).
6. 케이블 라우팅: Route the coiled cable in a manner that avoids sharp edges, moving parts, and areas where it could be pinched or damaged. Allow sufficient slack for machine movement without excessive stretching.
7. 전원 켜기: Once all connections are secure, power on your equipment according to the manufacturer's instructions.

5. 운영 지침

Once the Trimble 7-Pin Coil Cable is correctly installed, it facilitates communication and power between your machine control components. No specific operational steps are required for the cable itself, as its function is passive data and power transmission. However, observe the following during operation:

• 모니터 연결: Periodically check that the cable connections remain secure, especially in environments with vibration or movement.
• 스트레스를 피하세요: Ensure the coiled cable is not subjected to excessive pulling or stretching beyond its intended range of motion.
• 환경 보호: While the cable is designed for rugged use, protect connectors from direct exposure to heavy rain, mud, or extreme temperatures when possible.

6. 유지관리

Regular maintenance helps prolong the life and ensure the reliability of your Trimble 7-Pin Coil Cable:

• 청소:
  • Disconnect the cable from all devices before cleaning.
  • Wipe the cable and connectors with a clean, damp 먼지, 먼지, 이물질을 제거하는 천입니다.
  • For stubborn grime, use a mild, non-abrasive cleaning solution. Ensure connectors are completely dry before reconnecting.
  • Use compressed air to clear debris from pin receptacles if necessary, avoiding direct contact with pins.
• 점검:
  • Regularly inspect the entire length of the cable for cuts, cracks, abrasions, or signs of wear.
  • Check connectors for bent, corroded, or missing pins. Ensure locking collars operate smoothly.
  • If any damage is found, replace the cable immediately to prevent equipment malfunction or electrical hazards.
• 저장:
  • When not in use, store the cable in a clean, dry environment, away from direct sunlight and extreme temperatures.
  • Avoid tightly coiling or kinking the cable during storage. A loose coil is preferable.

7. 문제 해결

If you experience issues with your machine control system that you suspect are related to the cable, consider the following troubleshooting steps:

If troubleshooting steps do not resolve the issue, contact Trimble support or your authorized dealer for further assistance.

8. 사양

9. 보증 및 지원

For information regarding the warranty terms and conditions for the Trimble 7-Pin Coil Cable (에이티026047), please refer to the documentation provided with your original purchase or contact your authorized Trimble dealer. Trimble provides technical support and service for its products.

For technical assistance, spare parts, or service inquiries, please contact your local Trimble representative or visit the official Trimble web지원 리소스 사이트.