PowerA PlayStation VR 충전 및 디스플레이 스테이션 사용 설명서

소개

The PowerA Charge & Display Station is designed to provide a secure and organized solution for your PlayStation VR headset, DUALSHOCK 4 controller, and PlayStation Move controllers. This station allows for simultaneous charging of one DUALSHOCK 4 controller and two PlayStation Move controllers, while also serving as a dedicated display stand for your PlayStation VR headset. This manual provides essential information for proper setup, operation, and maintenance of your device.

패키지 내용

• PowerA Charge & Display Station
• AC 전원 어댑터

안전 정보

• 장치를 작동하기 전에 모든 지침을 읽으십시오.
• 기기를 물이나 과도한 습기로부터 멀리하십시오.
• 장치를 분해하거나 개조하지 마십시오.
• 제공된 AC 전원 어댑터만 사용하십시오.
• 작동 중에는 장치 주변에 적절한 환기가 이루어지도록 하세요.
• Place the station on a stable, flat surface to prevent tipping.

설정

1. 역을 펼쳐보세요: 포장에서 모든 구성 요소를 조심스럽게 제거합니다.
2. 역을 조립하세요: Connect the vertical stand to the base unit. Ensure it clicks securely into place.
3. 전원 연결: Insert the small end of the AC power adapter into the power input port located at the rear of the station's base.
4. 전원 케이블 경로: Utilize the cable management grooves on the underside of the base to route the power cable neatly. There are grooves for rear, left, and right exits.
5. 콘센트에 꽂으세요: AC 전원 어댑터를 표준 벽면 콘센트에 꽂습니다.

The back of the station, featuring the power input and integrated cable management channels to keep your setup tidy.

사이드 프로file of the Charge & Display Station, illustrating the support structure for the PSVR headset and the charging docks for controllers.

작동 지침

1. Displaying the PSVR Headset:
   • Gently place your PlayStation VR headset onto the designated cradle at the top of the station.
   • Adjust the headset's band to ensure a secure and stable fit on the stand. This helps prevent accidental slipping.
   • Route the headset's cable around the stand for organized storage.
2. Charging DUALSHOCK 4 Controller:
   • Align the DUALSHOCK 4 controller with the charging port on the front-left dock of the station.
   • Press the controller down firmly onto the spring-loaded connector until it seats properly.
   • A light indicator on the controller will illuminate, confirming that charging has begun.
3. Charging PlayStation Move Controllers:
   • Insert each PlayStation Move controller into its respective charging slot on the front-right of the station.
   • Ensure the controllers are fully seated in the docks for a proper connection.
   • The indicator lights on the Move controllers will show their charging status.

The PowerA Charge & Display Station, fully assembled and ready to hold and charge your PlayStation VR headset, DUALSHOCK 4 controller, and PlayStation Move controllers.

The PlayStation VR headset positioned on its dedicated stand. Adjust the headset band for a secure fit on the display cradle.

Detail of the DUALSHOCK 4 controller charging dock. Ensure the controller is firmly seated for proper connection and charging.

Detail of the PlayStation Move controller charging docks. Place controllers securely into the slots for charging.

유지

• 청소: Disconnect the power adapter before cleaning. Use a soft, dry cloth to wipe the surface of the station. Do not use abrasive cleaners or solvents.
• 저장: When not in use for extended periods, store the station in a cool, dry place.

문제 해결

• Controllers Not Charging:
  • Ensure the power adapter is securely connected to both the station and the wall outlet.
  • Verify that controllers are properly seated in their respective charging docks. For DUALSHOCK 4, ensure it is pressed down firmly onto the spring-loaded connector.
  • Check for any obstructions or debris in the charging ports.
• PSVR Headset Slips Off Stand:
  • Ensure the PSVR headset's adjustable band is tightened to its default or a smaller size when placed on the stand. A loose band may cause the headset to slip.
  • Confirm the station is on a stable, level surface.

명세서

• 모델 번호: 1426810-01
• 제품 크기: 13.4 x 9.5 x 5.6 인치
• 품목 무게: 1.88파운드
• 제조업체: PowerA
• 호환성: PlayStation VR Headset, DUALSHOCK 4 Controller, PlayStation Move Controllers

보증 및 지원

For warranty information and technical support, please refer to the official PowerA web사이트를 방문하거나 고객 서비스에 직접 문의하세요. 보증 청구를 위해 구매 증빙 자료를 보관하세요.