소개
This manual provides essential information for the safe and effective use of your Satco S9542 1.6W T3 LED Light Bulb. This LED bulb features a G4 bi-pin base, emits 3000K warm white light, and is designed for 12V systems. It is dimmable and offers an energy-efficient replacement for traditional 25W incandescent bulbs.
안전 정보
- Always turn off power to the fixture before installing, removing, or cleaning the bulb.
- 조명기구의 볼륨을 확인하세요tage (12V) matches the bulb's requirements. Incorrect voltage can damage the bulb or fixture.
- Do not use this bulb in fully enclosed fixtures unless specified by the fixture manufacturer, as heat buildup can reduce bulb life.
- Avoid touching the bulb with bare hands during installation to prevent oil transfer, which can affect performance.
- This bulb is designed for indoor use and is cETLus - Damp 평가했다.
설정 및 설치
- 전원 끄기: 조명 기구를 제어하는 전등 스위치 또는 차단기를 찾아 전원을 완전히 차단하십시오.
- 기존 전구 제거: Carefully remove the old bulb from the G4 bi-pin base fixture. Allow it to cool if it was recently in use.
- 새 LED 전구를 삽입하세요: Align the two pins of the Satco S9542 LED bulb with the holes in the G4 socket. Gently push the bulb straight into the socket until it is firmly seated. Do not force the bulb.
- 복원력 : 전등 스위치나 차단기에서 전원을 다시 켜세요.
- 시험: 전구가 제대로 작동하는지 확인하려면 전구 스위치를 켜세요.
이미지: 앞면 view of the Satco S9542 LED light bulb, showing its compact size and bi-pin base.
이미지: 각도 view of the Satco S9542 LED light bulb, highlighting the G4 bi-pin connectors for proper insertion.
작동 지침
The Satco S9542 LED bulb operates immediately upon receiving 12V power. It is designed to be dimmable, allowing you to adjust light output when used with compatible 12V dimmers. Ensure your dimmer is rated for LED loads to prevent flickering or damage.
유지
- 청소: Before cleaning, always turn off the power and allow the bulb to cool. Wipe the bulb gently with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- 대사: This LED bulb has an average life of 25,000 hours. When replacement is needed, follow the installation steps in reverse to remove the old bulb and install a new one.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 전구가 켜지지 않습니다. | No power to the fixture; bulb not seated correctly; faulty bulb. | Check power supply and switch. Re-seat the bulb firmly. Test with another known-good bulb. |
| Bulb flickers or dims erratically. | Incompatible dimmer; unstable voltag예: 느슨한 연결. | Ensure dimmer is LED-compatible. Check for stable 12V supply. Verify bulb is securely seated. |
| Bulb is too dim or too bright. | Incorrect dimmer setting; incompatible dimmer. | Adjust dimmer setting. Ensure dimmer is LED-compatible and properly configured. |
명세서
| 특징 | 세부 사항 |
|---|---|
| 모델명 | S9542 |
| 상표 | 샛코 |
| 라이트 타입 | 주도의 |
| 왓tage | 1.6와트(LED) |
| 백열등가 | 25 와트 |
| 전구 모양 크기 | T3 |
| 전구베이스 | G4 바이핀 |
| 권tage | 12 볼트 |
| 밝은 색상 | 따뜻한 흰색 |
| 색온도 | 3000 켈빈 |
| 명도 | 200루멘 |
| 밝기 조절 가능 | 예 |
| 평균 수명 | 25,000시간 |
| 실내/실외 사용 | 실내(Damp 정격) |
| 제품 치수 | 0.63 x 0.63 x 1.75 인치 |
| 품목 무게 | 0.144 온스 |
Image: Front of the Satco S9542 packaging, displaying model number, wattag전자, 권tage, 그리고 색온도.
Image: Back of the Satco S9542 packaging, showing brightness in lumens and estimated energy cost.
보증
This Satco S9542 LED Light Bulb is covered by a 3-year limited warranty. For details regarding warranty claims, please refer to the official Satco web사이트를 방문하거나 고객 지원팀에 문의하세요.
지원하다
For further assistance, technical support, or inquiries regarding your Satco S9542 LED Light Bulb, please visit the official Satco web사이트 또는 고객 서비스 부서에 문의하세요. 연락처 정보는 일반적으로 제품 포장이나 제조업체의 web대지.
